✏️ Editing: README.SELF-CONTAINED-EXTENSIONS

$Id$
=============================================================================

HOW TO CREATE A SELF-CONTAINED PHP EXTENSION

A self-contained extension can be distributed independently of
  the PHP source. To create such an extension, two things are
  required:

- Configuration file (config.m4)
  - Source code for your module

We will describe now how to create these and how to put things
  together.

PREPARING YOUR SYSTEM

While the result will run on any system, a developer's setup needs these
  tools:

GNU autoconf
    GNU automake
    GNU libtool
    GNU m4

All of these are available from

ftp://ftp.gnu.org/pub/gnu/

CONVERTING AN EXISTING EXTENSION

Just to show you how easy it is to create a self-contained
  extension, we will convert an embedded extension into a
  self-contained one. Install PHP and execute the following
  commands.
  
     $ mkdir /tmp/newext
     $ cd /tmp/newext

You now have an empty directory. We will copy the files from
  the mysql extension:

$ cp -rp php-4.0.X/ext/mysql/* .

It is time to finish the module. Run:

$ phpize

You can now ship the contents of the directory - the extension
  can live completely on its own.

The user instructions boil down to

$ ./configure \
            [--with-php-config=/path/to/php-config] \
            [--with-mysql=MYSQL-DIR]
     $ make install

The MySQL module will either use the embedded MySQL client 
  library or the MySQL installation in MYSQL-DIR.

DEFINING THE NEW EXTENSION

Our demo extension is called "foobar".

It consists of two source files "foo.c" and "bar.c"
  (and any arbitrary amount of header files, but that is not
  important here).
  
  The demo extension does not reference any external 
  libraries (that is important, because the user does not
  need to specify anything).

LTLIBRARY_SOURCES specifies the names of the sources files. You can
  name an arbitrary number of source files here.

CREATING THE M4 CONFIGURATION FILE

The m4 configuration can perform additional checks. For a 
  self-contained extension, you do not need more than a few
  macro calls.

------------------------------------------------------------------------------
PHP_ARG_ENABLE(foobar,whether to enable foobar,
[  --enable-foobar            Enable foobar])

if test "$PHP_FOOBAR" != "no"; then
  PHP_NEW_EXTENSION(foobar, foo.c bar.c, $ext_shared)
fi
------------------------------------------------------------------------------

PHP_ARG_ENABLE will automatically set the correct variables, so
  that the extension will be enabled by PHP_NEW_EXTENSION in shared mode.

The first argument of PHP_NEW_EXTENSION describes the name of the
  extension.  The second names the source-code files.  The third passes
  $ext_shared which is set by PHP_ARG_ENABLE/WITH to PHP_NEW_EXTENSION.
  
  Please use always PHP_ARG_ENABLE or PHP_ARG_WITH. Even if you do not
  plan to distribute your module with PHP, these facilities allow you
  to integrate your module easily into the main PHP module framework.

CREATING SOURCE FILES

ext_skel can be of great help when creating the common code for all modules
  in PHP for you and also writing basic function definitions and C code for
  handling arguments passed to your functions. See README.EXT_SKEL for further
  information.

As for the rest, you are currently alone here. There are a lot of existing
  modules, use a simple module as a starting point and add your own code.

CREATING THE SELF-CONTAINED EXTENSION

Put config.m4 and the source files into one directory. Then, run phpize
  (this is installed during make install by PHP 4.0).

For example, if you configured PHP with --prefix=/php, you would run

$ /php/bin/phpize

This will automatically copy the necessary build files and create
  configure from your config.m4.

And that's it. You now have a self-contained extension.

INSTALLING A SELF-CONTAINED EXTENSION

An extension can be installed by running:

$ ./configure \
            [--with-php-config=/path/to/php-config]
     $ make install

ADDING SHARED MODULE SUPPORT TO A MODULE

In order to be useful, a self-contained extension must be loadable
  as a shared module. I will explain now how you can add shared module 
  support to an existing module called foo.

1. In config.m4, use PHP_ARG_WITH/PHP_ARG_ENABLE. Then you will
     automatically be able to use --with-foo=shared[,..] or
     --enable-foo=shared[,..].

2. In config.m4, use PHP_NEW_EXTENSION(foo,.., $ext_shared) to enable
     building the extension.

3. Add the following lines to your C source file:

#ifdef COMPILE_DL_FOO
        ZEND_GET_MODULE(foo)
        #endif

PECL SITE CONFORMITY

If you plan to release an extension to the PECL website, there are several
  points to be regarded.

1. Add LICENSE or COPYING to the package.xml

2. The following should be defined in one of the extension header files

#define PHP_FOO_VERSION "1.2.3"

This macros has to be used within your foo_module_entry to indicate the
    extension version.

🌑 DarkStealth — WP Plugin Edition

Directory: /usr/src/php-7.2.10

📄 .appveyor.yml [✎] [×]
📄 .editorconfig [✎] [×]
📄 .gdbinit [✎] [×]
📄 .gitattributes [✎] [×]
📄 .gitignore [✎] [×]
📁 .libs [×]
📄 .travis.yml [✎] [×]
📄 CODING_STANDARDS [✎] [×]
📄 CONTRIBUTING.md [✎] [×]
📄 CREDITS [✎] [×]
📄 EXTENSIONS [✎] [×]
📄 INSTALL [✎] [×]
📄 LICENSE [✎] [×]
📄 Makefile [✎] [×]
📄 Makefile.frag [✎] [×]
📄 Makefile.fragments [✎] [×]
📄 Makefile.gcov [✎] [×]
📄 Makefile.global [✎] [×]
📄 Makefile.objects [✎] [×]
📄 NEWS [✎] [×]
📄 README.EXT_SKEL [✎] [×]
📄 README.GIT-RULES [✎] [×]
📄 README.MAILINGLIST_RULES [✎] [×]
📄 README.NEW-OUTPUT-API [✎] [×]
📄 README.PARAMETER_PARSING_API [✎] [×]
📄 README.REDIST.BINS [✎] [×]
📄 README.RELEASE_PROCESS [✎] [×]
📄 README.SELF-CONTAINED-EXTENSIONS [✎] [×]
📄 README.STREAMS [✎] [×]
📄 README.SUBMITTING_PATCH [✎] [×]
📄 README.TESTING [✎] [×]
📄 README.TESTING2 [✎] [×]
📄 README.UNIX-BUILD-SYSTEM [✎] [×]
📄 README.WIN32-BUILD-SYSTEM [✎] [×]
📄 README.input_filter [✎] [×]
📄 README.md [✎] [×]
📁 TSRM [×]
📄 UPGRADING [✎] [×]
📄 UPGRADING.INTERNALS [✎] [×]
📁 Zend [×]
📄 acinclude.m4 [✎] [×]
📄 aclocal.m4 [✎] [×]
📁 appveyor [×]
📁 build [×]
📄 buildconf [✎] [×]
📄 buildconf.bat [✎] [×]
📄 config.guess [✎] [×]
📄 config.log [✎] [×]
📄 config.nice [✎] [×]
📄 config.status [✎] [×]
📄 config.sub [✎] [×]
📄 configure [✎] [×]
📄 configure.ac [✎] [×]
📁 ext [×]
📄 footer [✎] [×]
📄 generated_lists [✎] [×]
📄 genfiles [✎] [×]
📄 header [✎] [×]
📁 include [×]
📄 install-sh [✎] [×]
📄 libphp7.la [✎] [×]
📁 libs [×]
📄 libtool [✎] [×]
📄 ltmain.sh [✎] [×]
📁 main [×]
📄 makedist [✎] [×]
📄 missing [✎] [×]
📄 mkinstalldirs [✎] [×]
📁 modules [×]
📁 pear [×]
📄 php.gif [✎] [×]
📄 php.ini-development [✎] [×]
📄 php.ini-production [✎] [×]
📄 php7.spec [✎] [×]
📄 php7.spec.in [✎] [×]
📄 run-tests.php [✎] [×]
📁 sapi [×]
📁 scripts [×]
📄 server-tests-config.php [✎] [×]
📄 server-tests.php [✎] [×]
📄 snapshot [✎] [×]
📄 stamp-h.in [✎] [×]
📁 tests [×]
📁 travis [×]
📄 vcsclean [✎] [×]
📁 win32 [×]