✏️ Editing: adsl-start

#! /bin/bash
# Generated automatically from pppoe-start.in by configure.
#***********************************************************************
#
# pppoe-start
#
# Shell script to bring up an PPPoE connection
#
# Copyright (C) 2000 Roaring Penguin Software Inc.
#
# $Id$
#
# This file may be distributed under the terms of the GNU General
# Public License.
#
# Usage: pppoe-start [config_file]
#        pppoe-start interface user [config_file]
# Second form overrides USER and ETH from config file.
# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
#
#***********************************************************************

# From AUTOCONF
prefix=/usr
exec_prefix=/usr

# Paths to programs
CONNECT=/sbin/pppoe-connect
ECHO=/bin/echo
IP=/sbin/ip
LS=/bin/ls
NETWORKDIR=/etc/sysconfig/network-scripts

get_device() {
    if [ ! -d $NETWORKDIR ] ; then
        $ECHO "** $NETWORKDIR not found"
        $ECHO "** Quitting"
        exit 1
    fi

cd $NETWORKDIR
    interfaces=$($LS ifcfg-ppp* 2>/dev/null | egrep -v '(~|\.bak)$' | \
                 egrep -v '(rpmsave|rpmorig|rpmnew)' | sed 's/^ifcfg-//g')

for i in $interfaces ; do
        test -f ifcfg-$i && . ifcfg-$i 2>/dev/null
        if [ "$TYPE" = "xDSL" ] ; then
            CONFIG=$NETWORKDIR/ifcfg-$i
            break
        fi
    done
}

# Set to "C" locale so we can parse messages from commands
LANG=C
export LANG

# Defaults
USER=""
ETH=""
ME=`basename $0`

# Must be root
if [ "`/usr/bin/id -u`" != 0 ] ; then
    [ "$DEBUG" = "1" ] && $ECHO "$ME: You must be root to run this script" >& 2
    exit 1
fi

# Debugging
if [ "$DEBUG" = "1" ] ; then
    $ECHO "*** Running in debug mode... please be patient..."
    DEBUG=`mktemp -d /tmp/pppoe-debug-XXXXXXXX`
    if [ $? -ne 0 ] ; then
	$ECHO "Could not create directory $DEBUG... exiting"
	exit 1
    fi
    export DEBUG
    DEBUG=$DEBUG/pppoe-debug.txt

# Initial debug output
    $ECHO "---------------------------------------------" > $DEBUG
    $ECHO "* The following section contains information about your system" >> $DEBUG
    date >> $DEBUG
    $ECHO "Output of uname -a" >> $DEBUG
    uname -a >> $DEBUG
    $ECHO "---------------------------------------------" >> $DEBUG
    $ECHO "* The following section contains information about your network" >> $DEBUG
    $ECHO "* interfaces.  The one you chose for PPPoE should contain the words:" >> $DEBUG
    $ECHO "* 'UP' and 'RUNNING'.  If it does not, you probably have an Ethernet" >> $DEBUG
    $ECHO "* driver problem." >> $DEBUG
    $ECHO "Output of ip addr show" >> $DEBUG
    $IP addr show >> $DEBUG
    $ECHO "---------------------------------------------" >> $DEBUG
    if [ "`uname -s`" = "Linux" ] ; then
        $ECHO "* The following section contains information about kernel modules" >> $DEBUG
	$ECHO "* If the module for your Ethernet card is 'tulip', you might" >> $DEBUG
	$ECHO "* want to look for an updated version at http://www.scyld.com" >> $DEBUG
	$ECHO "Output of lsmod" >> $DEBUG
	lsmod >> $DEBUG
	$ECHO "---------------------------------------------" >> $DEBUG
    fi
    $ECHO "* The following section lists your routing table." >> $DEBUG
    $ECHO "* If you have an entry which starts with '0.0.0.0', you probably" >> $DEBUG
    $ECHO "* have defined a default route and gateway, and pppd will" >> $DEBUG
    $ECHO "* not create a default route using your ISP.  Try getting" >> $DEBUG
    $ECHO "* rid of this route." >> $DEBUG
    $ECHO "Output of netstat -n -r" >> $DEBUG
    netstat -n -r >> $DEBUG
    $ECHO "---------------------------------------------" >> $DEBUG
    $ECHO "Contents of /etc/resolv.conf" >> $DEBUG
    $ECHO "* The following section lists DNS setup." >> $DEBUG
    $ECHO "* If you can browse by IP address, but not name, suspect" >> $DEBUG
    $ECHO "* a DNS problem." >> $DEBUG
    cat /etc/resolv.conf >> $DEBUG
    $ECHO "---------------------------------------------" >> $DEBUG
    $ECHO "* The following section lists /etc/ppp/options." >> $DEBUG
    $ECHO "* You should have NOTHING in that file." >> $DEBUG
    $ECHO "Contents of /etc/ppp/options" >> $DEBUG
    cat /etc/ppp/options >> $DEBUG 2>/dev/null
    $ECHO "---------------------------------------------" >> $DEBUG
    DEBUG="1"
fi

# Sort out command-line arguments
case "$#" in
    1)
	CONFIG="$1"
	;;
    3)
	CONFIG="$3"
	;;
esac

if [ -z "$CONFIG" ] ; then
    get_device
    [ -z "$CONFIG" ] && CONFIG=/etc/ppp/pppoe.conf
fi

if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
    [ "$DEBUG" = "1" ] && $ECHO "$ME: Cannot read configuration file '$CONFIG'" >& 2
    exit 1
fi

export CONFIG
. $CONFIG

# Check for command-line overriding of ETH and USER
case "$#" in
    2|3)
	ETH="$1"
	USER="$2"
	;;
esac

# Check for pidfile
if [ -r "$PIDFILE" ] ; then
    PID=`cat "$PIDFILE"`
    # Check if still running
    kill -0 $PID > /dev/null 2>&1
    if [ $? = 0 ] ; then
	[ "$DEBUG" = "1" ] && $ECHO "$ME: There already seems to be an PPPoE connection up (PID $PID)" >& 2
	exit 1
    fi
    # Delete bogus PIDFILE
    rm -f "$PIDFILE" "$PIDFILE.pppd" "$PIDFILE.pppoe" "$PIDFILE.start"
fi

echo $$ > $PIDFILE.start

# Start the connection in the background unless we're debugging
if [ "$DEBUG" != "" ] ; then
    $CONNECT "$@"
    exit 0
fi

$CONNECT "$@" > /dev/null 2>&1 &
CONNECT_PID=$!

if [ "$CONNECT_TIMEOUT" = "" -o "$CONNECT_TIMEOUT" = 0 ] ; then
    exit 0
fi

# Don't monitor connection if dial-on-demand
if [ "$DEMAND" != "" -a "$DEMAND" != "no" ] ; then
    exit 0
fi

# Monitor connection
TIME=0
while [ true ] ; do
    /sbin/pppoe-status $CONFIG > /dev/null 2>&1

# Looks like the interface came up
    if [ $? = 0 ] ; then
	# Print newline if standard input is a TTY
	[ "$DEBUG" = "1" ] && tty -s && $ECHO " Connected!"
	exit 0
    fi

if test -n "$FORCEPING" ; then
	[ "$DEBUG" = "1" ] && $ECHO -n "$FORCEPING"
    else
	[ "$DEBUG" = "1" ] && tty -s && $ECHO -n "$PING"
    fi
    sleep $CONNECT_POLL
    TIME=`expr $TIME + $CONNECT_POLL`
    if [ $TIME -gt $CONNECT_TIMEOUT ] ; then
	break
    fi
done

[ "$DEBUG" = "1" ] && $ECHO "TIMED OUT" >& 2
# Timed out!  Kill the pppoe-connect process and quit
kill $CONNECT_PID > /dev/null 2>&1

# Clean up PIDFILE(s)
rm -f "$PIDFILE" "$PIDFILE.pppd" "$PIDFILE.pppoe" "$PIDFILE.start"

# add old default gw back
if [ -s /etc/default-routes ] ; then
    while read spec; do
        /sbin/ip route add $spec
    done < /etc/default-routes
    rm -f /etc/default-routes
fi

exit 1

🌑 DarkStealth — WP Plugin Edition

Directory: /usr/sbin

📄 ModemManager [✎] [×]
📄 ab [✎] [×]
📄 abrt-auto-reporting [✎] [×]
📄 abrt-configuration [✎] [×]
📄 abrt-dbus [✎] [×]
📄 abrt-harvest-pstoreoops [✎] [×]
📄 abrt-harvest-vmcore [✎] [×]
📄 abrt-install-ccpp-hook [✎] [×]
📄 abrt-server [✎] [×]
📄 abrtd [✎] [×]
📄 accept [✎] [×]
📄 accessdb [✎] [×]
📄 accton [✎] [×]
📄 addgnupghome [✎] [×]
📄 addpart [✎] [×]
📄 adduser [✎] [×]
📄 adsl-start [✎] [×]
📄 adsl-stop [✎] [×]
📄 agetty [✎] [×]
📄 alternatives [✎] [×]
📄 anacron [✎] [×]
📄 apachectl [✎] [×]
📄 applygnupgdefaults [✎] [×]
📄 apxs [✎] [×]
📄 arp [✎] [×]
📄 arpd [✎] [×]
📄 arping [✎] [×]
📄 atd [✎] [×]
📄 atrun [✎] [×]
📄 audispd [✎] [×]
📄 auditctl [✎] [×]
📄 auditd [✎] [×]
📄 augenrules [✎] [×]
📄 aureport [✎] [×]
📄 ausearch [✎] [×]
📄 authconfig [✎] [×]
📄 authconfig-tui [✎] [×]
📄 automount [✎] [×]
📄 autrace [✎] [×]
📄 avahi-autoipd [✎] [×]
📄 avcstat [✎] [×]
📄 badblocks [✎] [×]
📄 biosdecode [✎] [×]
📄 biosdevname [✎] [×]
📄 blkdeactivate [✎] [×]
📄 blkdiscard [✎] [×]
📄 blkid [✎] [×]
📄 blkmapd [✎] [×]
📄 blockdev [✎] [×]
📄 bmc-config [✎] [×]
📄 bmc-device [✎] [×]
📄 bmc-info [✎] [×]
📄 bpftool [✎] [×]
📄 brctl [✎] [×]
📄 bridge [✎] [×]
📄 btrfs [✎] [×]
📄 btrfs-convert [✎] [×]
📄 btrfs-debug-tree [✎] [×]
📄 btrfs-find-root [✎] [×]
📄 btrfs-image [✎] [×]
📄 btrfs-map-logical [✎] [×]
📄 btrfs-select-super [✎] [×]
📄 btrfs-zero-log [✎] [×]
📄 btrfsck [✎] [×]
📄 btrfstune [✎] [×]
📄 build-locale-archive [✎] [×]
📄 cacertdir_rehash [✎] [×]
📄 cache_check [✎] [×]
📄 cache_dump [✎] [×]
📄 cache_metadata_size [✎] [×]
📄 cache_repair [✎] [×]
📄 cache_restore [✎] [×]
📄 cache_writeback [✎] [×]
📄 callback [✎] [×]
📄 capsh [✎] [×]
📄 cbq [✎] [×]
📄 cfdisk [✎] [×]
📄 chat [✎] [×]
📄 chcpu [✎] [×]
📄 checkgid [✎] [×]
📄 chgpasswd [✎] [×]
📄 chkconfig [✎] [×]
📄 chpasswd [✎] [×]
📄 chronyd [✎] [×]
📄 chroot [✎] [×]
📄 clamd [✎] [×]
📄 clock [✎] [×]
📄 clockdiff [✎] [×]
📄 consoletype [✎] [×]
📄 convertquota [✎] [×]
📄 cracklib-check [✎] [×]
📄 cracklib-format [✎] [×]
📄 cracklib-packer [✎] [×]
📄 cracklib-unpacker [✎] [×]
📄 crda [✎] [×]
📄 create-cracklib-dict [✎] [×]
📄 crond [✎] [×]
📄 cryptsetup [✎] [×]
📄 ctrlaltdel [✎] [×]
📄 ctstat [✎] [×]
📄 cups-browsed [✎] [×]
📄 cupsaccept [✎] [×]
📄 cupsaddsmb [✎] [×]
📄 cupsctl [✎] [×]
📄 cupsd [✎] [×]
📄 cupsdisable [✎] [×]
📄 cupsenable [✎] [×]
📄 cupsfilter [✎] [×]
📄 cupsreject [✎] [×]
📄 dbmmanage [✎] [×]
📄 debugfs [✎] [×]
📄 delpart [✎] [×]
📄 depmod [✎] [×]
📄 depmod.ksplice [✎] [×]
📄 depmod.ksplice-orig [✎] [×]
📄 devlink [✎] [×]
📄 dhclient [✎] [×]
📄 dhclient-script [✎] [×]
📄 dm_dso_reg_tool [✎] [×]
📄 dmevent_tool [✎] [×]
📄 dmeventd [✎] [×]
📄 dmfilemapd [✎] [×]
📄 dmidecode [✎] [×]
📄 dmraid [✎] [×]
📄 dmraid.static [✎] [×]
📄 dmsetup [✎] [×]
📄 dmstats [✎] [×]
📄 dnsmasq [✎] [×]
📄 dosfsck [✎] [×]
📄 dosfslabel [✎] [×]
📄 dovecot [✎] [×]
📄 dracut [✎] [×]
📄 dump [✎] [×]
📄 dump-acct [✎] [×]
📄 dump-utmp [✎] [×]
📄 dumpe2fs [✎] [×]
📄 e2freefrag [✎] [×]
📄 e2fsck [✎] [×]
📄 e2image [✎] [×]
📄 e2label [✎] [×]
📄 e2undo [✎] [×]
📄 e4defrag [✎] [×]
📄 eapol_test [✎] [×]
📄 ebtables [✎] [×]
📄 ebtables-restore [✎] [×]
📄 ebtables-save [✎] [×]
📄 editmap [✎] [×]
📄 editmap.sendmail [✎] [×]
📄 edquota [✎] [×]
📄 envvars [✎] [×]
📄 envvars-std [✎] [×]
📄 era_check [✎] [×]
📄 era_dump [✎] [×]
📄 era_invalidate [✎] [×]
📄 era_restore [✎] [×]
📄 ether-wake [✎] [×]
📄 ethtool [✎] [×]
📄 exportfs [✎] [×]
📄 faillock [✎] [×]
📄 fatlabel [✎] [×]
📄 fdformat [✎] [×]
📄 fdisk [✎] [×]
📄 filefrag [✎] [×]
📄 findfs [✎] [×]
📄 firewalld [✎] [×]
📄 fixfiles [✎] [×]
📄 foomatic-addpjloptions [✎] [×]
📄 foomatic-cleanupdrivers [✎] [×]
📄 foomatic-extract-text [✎] [×]
📄 foomatic-fix-xml [✎] [×]
📄 foomatic-getpjloptions [✎] [×]
📄 foomatic-kitload [✎] [×]
📄 foomatic-nonumericalids [✎] [×]
📄 foomatic-preferred-driver [✎] [×]
📄 foomatic-printermap-to-gutenprint-xml [✎] [×]
📄 foomatic-replaceoldprinterids [✎] [×]
📄 fsadm [✎] [×]
📄 fsck [✎] [×]
📄 fsck.btrfs [✎] [×]
📄 fsck.cramfs [✎] [×]
📄 fsck.ext2 [✎] [×]
📄 fsck.ext3 [✎] [×]
📄 fsck.ext4 [✎] [×]
📄 fsck.fat [✎] [×]
📄 fsck.minix [✎] [×]
📄 fsck.msdos [✎] [×]
📄 fsck.vfat [✎] [×]
📄 fsck.xfs [✎] [×]
📄 fsfreeze [✎] [×]
📄 fstrim [✎] [×]
📄 ftpscrub [✎] [×]
📄 ftpshut [✎] [×]
📄 fuser [✎] [×]
📄 fxload [✎] [×]
📄 genhomedircon [✎] [×]
📄 genhostid [✎] [×]
📄 genl [✎] [×]
📄 genl-ctrl-list [✎] [×]
📄 getcap [✎] [×]
📄 getenforce [✎] [×]
📄 getpcaps [✎] [×]
📄 getsebool [✎] [×]
📄 glibc_post_upgrade.i686 [✎] [×]
📄 glibc_post_upgrade.x86_64 [✎] [×]
📄 gpm [✎] [×]
📄 groupadd [✎] [×]
📄 groupdel [✎] [×]
📄 groupmems [✎] [×]
📄 groupmod [✎] [×]
📄 grpck [✎] [×]
📄 grpconv [✎] [×]
📄 grpunconv [✎] [×]
📄 grub2-bios-setup [✎] [×]
📄 grub2-get-kernel-settings [✎] [×]
📄 grub2-install [✎] [×]
📄 grub2-macbless [✎] [×]
📄 grub2-mkconfig [✎] [×]
📄 grub2-ofpathname [✎] [×]
📄 grub2-probe [✎] [×]
📄 grub2-reboot [✎] [×]
📄 grub2-rpm-sort [✎] [×]
📄 grub2-set-default [✎] [×]
📄 grub2-setpassword [✎] [×]
📄 grub2-sparc64-setup [✎] [×]
📄 grubby [✎] [×]
📄 gss-server [✎] [×]
📄 gssproxy [✎] [×]
📄 halt [✎] [×]
📄 hardlink [✎] [×]
📄 hdparm [✎] [×]
📄 htcacheclean [✎] [×]
📄 htdbm [✎] [×]
📄 htdigest [✎] [×]
📄 htpasswd [✎] [×]
📄 httpd [✎] [×]
📄 httxt2dbm [✎] [×]
📄 hwclock [✎] [×]
📄 iconvconfig [✎] [×]
📄 iconvconfig.i686 [✎] [×]
📄 iconvconfig.x86_64 [✎] [×]
📄 ifcfg [✎] [×]
📄 ifconfig [✎] [×]
📄 ifdown [✎] [×]
📄 ifenslave [✎] [×]
📄 ifstat [✎] [×]
📄 ifup [✎] [×]
📄 in.proftpd [✎] [×]
📄 init [✎] [×]
📄 insmod [✎] [×]
📄 install-info [✎] [×]
📄 installkernel [✎] [×]
📄 intel-microcode2ucode [✎] [×]
📄 iotop [✎] [×]
📄 ip [✎] [×]
📄 ip6tables [✎] [×]
📄 ip6tables-restore [✎] [×]
📄 ip6tables-save [✎] [×]
📄 ipmaddr [✎] [×]
📄 ipmi-chassis [✎] [×]
📄 ipmi-chassis-config [✎] [×]
📄 ipmi-config [✎] [×]
📄 ipmi-console [✎] [×]
📄 ipmi-dcmi [✎] [×]
📄 ipmi-detect [✎] [×]
📄 ipmi-fru [✎] [×]
📄 ipmi-locate [✎] [×]
📄 ipmi-oem [✎] [×]
📄 ipmi-pef-config [✎] [×]
📄 ipmi-pet [✎] [×]
📄 ipmi-ping [✎] [×]
📄 ipmi-power [✎] [×]
📄 ipmi-raw [✎] [×]
📄 ipmi-sel [✎] [×]
📄 ipmi-sensors [✎] [×]
📄 ipmi-sensors-config [✎] [×]
📄 ipmiconsole [✎] [×]
📄 ipmidetect [✎] [×]
📄 ipmimonitoring [✎] [×]
📄 ipmiping [✎] [×]
📄 ipmipower [✎] [×]
📄 iprconfig [✎] [×]
📄 iprdbg [✎] [×]
📄 iprdump [✎] [×]
📄 iprinit [✎] [×]
📄 iprsos [✎] [×]
📄 iprupdate [✎] [×]
📄 ipset [✎] [×]
📄 iptables [✎] [×]
📄 iptables-restore [✎] [×]
📄 iptables-save [✎] [×]
📄 iptraf [✎] [×]
📄 iptraf-ng [✎] [×]
📄 iptstate [✎] [×]
📄 iptunnel [✎] [×]
📄 irqbalance [✎] [×]
📄 iw [✎] [×]
📄 kexec [✎] [×]
📄 key.dns_resolver [✎] [×]
📄 killall5 [✎] [×]
📄 kpartx [✎] [×]
📄 kpatch [✎] [×]
📄 ksplice-depmod [✎] [×]
📄 lchage [✎] [×]
📄 ldattach [✎] [×]
📄 ldconfig [✎] [×]
📄 ledctl [✎] [×]
📄 ledmon [✎] [×]
📄 lgroupadd [✎] [×]
📄 lgroupdel [✎] [×]
📄 lgroupmod [✎] [×]
📄 lid [✎] [×]
📄 lnewusers [✎] [×]
📄 lnstat [✎] [×]
📄 load_policy [✎] [×]
📄 lockdev [✎] [×]
📄 logresolve [✎] [×]
📄 logrotate [✎] [×]
📄 logsave [✎] [×]
📄 logwatch [✎] [×]
📄 losetup [✎] [×]
📄 lpadmin [✎] [×]
📄 lpasswd [✎] [×]
📄 lpc [✎] [×]
📄 lpc.cups [✎] [×]
📄 lpinfo [✎] [×]
📄 lpmove [✎] [×]
📄 lsmod [✎] [×]
📄 lsof [✎] [×]
📄 lspci [✎] [×]
📄 luseradd [✎] [×]
📄 luserdel [✎] [×]
📄 lusermod [✎] [×]
📄 lvchange [✎] [×]
📄 lvconvert [✎] [×]
📄 lvcreate [✎] [×]
📄 lvdisplay [✎] [×]
📄 lvextend [✎] [×]
📄 lvm [✎] [×]
📄 lvmconf [✎] [×]
📄 lvmconfig [✎] [×]
📄 lvmdiskscan [✎] [×]
📄 lvmdump [✎] [×]
📄 lvmetad [✎] [×]
📄 lvmpolld [✎] [×]
📄 lvmsadc [✎] [×]
📄 lvmsar [✎] [×]
📄 lvreduce [✎] [×]
📄 lvremove [✎] [×]
📄 lvrename [✎] [×]
📄 lvresize [✎] [×]
📄 lvs [✎] [×]
📄 lvscan [✎] [×]
📄 mailstats [✎] [×]
📄 makedumpfile [✎] [×]
📄 makemap [✎] [×]
📄 makemap.sendmail [✎] [×]
📄 matchpathcon [✎] [×]
📄 mcelog [✎] [×]
📄 mcstransd [✎] [×]
📄 mdadm [✎] [×]
📄 mdmon [✎] [×]
📄 mgetty [✎] [×]
📄 mii-diag [✎] [×]
📄 mii-tool [✎] [×]
📄 mkbootdisk [✎] [×]
📄 mkdict [✎] [×]
📄 mkdosfs [✎] [×]
📄 mkdumprd [✎] [×]
📄 mke2fs [✎] [×]
📄 mkfs [✎] [×]
📄 mkfs.btrfs [✎] [×]
📄 mkfs.cramfs [✎] [×]
📄 mkfs.ext2 [✎] [×]
📄 mkfs.ext3 [✎] [×]
📄 mkfs.ext4 [✎] [×]
📄 mkfs.fat [✎] [×]
📄 mkfs.minix [✎] [×]
📄 mkfs.msdos [✎] [×]
📄 mkfs.vfat [✎] [×]
📄 mkfs.xfs [✎] [×]
📄 mkhomedir_helper [✎] [×]
📄 mklost+found [✎] [×]
📄 mksquashfs [✎] [×]
📄 mkswap [✎] [×]
📄 modinfo [✎] [×]
📄 modprobe [✎] [×]
📄 modprobe.ksplice [✎] [×]
📄 modprobe.ksplice-orig [✎] [×]
📄 mount.ecryptfs [✎] [×]
📄 mount.ecryptfs_private [✎] [×]
📄 mount.fuse [✎] [×]
📄 mount.nfs [✎] [×]
📄 mount.nfs4 [✎] [×]
📄 mountstats [✎] [×]
📄 mpathconf [✎] [×]
📄 mpathpersist [✎] [×]
📄 msshd [✎] [×]
📄 mtr [✎] [×]
📄 multipath [✎] [×]
📄 multipathd [✎] [×]
📄 mysqld [✎] [×]
📄 nameif [✎] [×]
📄 netreport [✎] [×]
📄 new-kernel-pkg [✎] [×]
📄 newusers [✎] [×]
📄 nfsdcltrack [✎] [×]
📄 nfsidmap [✎] [×]
📄 nfsiostat [✎] [×]
📄 nfsstat [✎] [×]
📄 nl-class-add [✎] [×]
📄 nl-class-delete [✎] [×]
📄 nl-class-list [✎] [×]
📄 nl-classid-lookup [✎] [×]
📄 nl-cls-add [✎] [×]
📄 nl-cls-delete [✎] [×]
📄 nl-cls-list [✎] [×]
📄 nl-link-list [✎] [×]
📄 nl-pktloc-lookup [✎] [×]
📄 nl-qdisc-add [✎] [×]
📄 nl-qdisc-delete [✎] [×]
📄 nl-qdisc-list [✎] [×]
📄 nologin [✎] [×]
📄 nscd [✎] [×]
📄 nstat [✎] [×]
📄 ntp-keygen [✎] [×]
📄 ntpd [✎] [×]
📄 ntpdate [✎] [×]
📄 ntpdc [✎] [×]
📄 ntpq [✎] [×]
📄 ntptime [✎] [×]
📄 ntsysv [✎] [×]
📄 oddjobd [✎] [×]
📄 osd_login [✎] [×]
📄 ownership [✎] [×]
📄 packer [✎] [×]
📄 pam_console_apply [✎] [×]
📄 pam_tally2 [✎] [×]
📄 pam_timestamp_check [✎] [×]
📄 paperconfig [✎] [×]
📄 parted [✎] [×]
📄 partprobe [✎] [×]
📄 partx [✎] [×]
📄 pcscd [✎] [×]
📄 pdata_tools [✎] [×]
📄 pef-config [✎] [×]
📄 pidof [✎] [×]
📄 ping6 [✎] [×]
📄 pivot_root [✎] [×]
📄 plipconfig [✎] [×]
📄 pluginviewer [✎] [×]
📄 plymouth-set-default-theme [✎] [×]
📄 plymouthd [✎] [×]
📄 pm-hibernate [✎] [×]
📄 pm-powersave [✎] [×]
📄 pm-suspend [✎] [×]
📄 pm-suspend-hybrid [✎] [×]
📄 pm-utils-bugreport-info.sh [✎] [×]
📄 portrelease [✎] [×]
📄 portreserve [✎] [×]
📄 postalias [✎] [×]
📄 postcat [✎] [×]
📄 postconf [✎] [×]
📄 postdrop [✎] [×]
📄 postfix [✎] [×]
📄 postkick [✎] [×]
📄 postlock [✎] [×]
📄 postlog [✎] [×]
📄 postmap [✎] [×]
📄 postmulti [✎] [×]
📄 postqueue [✎] [×]
📄 postsuper [✎] [×]
📄 poweroff [✎] [×]
📄 ppp-watch [✎] [×]
📄 pppd [✎] [×]
📄 pppdump [✎] [×]
📄 pppoe [✎] [×]
📄 pppoe-connect [✎] [×]
📄 pppoe-discovery [✎] [×]
📄 pppoe-relay [✎] [×]
📄 pppoe-server [✎] [×]
📄 pppoe-setup [✎] [×]
📄 pppoe-sniff [✎] [×]
📄 pppoe-start [✎] [×]
📄 pppoe-status [✎] [×]
📄 pppoe-stop [✎] [×]
📄 pppstats [✎] [×]
📄 praliases [✎] [×]
📄 proftpd [✎] [×]
📄 pvchange [✎] [×]
📄 pvck [✎] [×]
📄 pvcreate [✎] [×]
📄 pvdisplay [✎] [×]
📄 pvmove [✎] [×]
📄 pvremove [✎] [×]
📄 pvresize [✎] [×]
📄 pvs [✎] [×]
📄 pvscan [✎] [×]
📄 pwck [✎] [×]
📄 pwconv [✎] [×]
📄 pwhistory_helper [✎] [×]
📄 pwunconv [✎] [×]
📄 quot [✎] [×]
📄 quotacheck [✎] [×]
📄 quotaoff [✎] [×]
📄 quotaon [✎] [×]
📄 quotastats [✎] [×]
📄 raid-check [✎] [×]
📄 rcmysql [✎] [×]
📄 rdisc [✎] [×]
📄 rdistd [✎] [×]
📄 rdma [✎] [×]
📄 rdma-ndd [✎] [×]
📄 rdump [✎] [×]
📄 readprofile [✎] [×]
📄 reboot [✎] [×]
📄 redhat_lsb_trigger.x86_64 [✎] [×]
📄 regdbdump [✎] [×]
📄 reject [✎] [×]
📄 repquota [✎] [×]
📄 request-key [✎] [×]
📄 resize2fs [✎] [×]
📄 resizepart [✎] [×]
📄 restore [✎] [×]
📄 restorecon [✎] [×]
📄 rfkill [✎] [×]
📄 rmcp-ping [✎] [×]
📄 rmcpping [✎] [×]
📄 rmmod [✎] [×]
📄 rmt [✎] [×]
📄 rngd [✎] [×]
📄 rotatelogs [✎] [×]
📄 route [✎] [×]
📄 routef [✎] [×]
📄 routel [✎] [×]
📄 rpc.gssd [✎] [×]
📄 rpc.idmapd [✎] [×]
📄 rpc.mountd [✎] [×]
📄 rpc.nfsd [✎] [×]
📄 rpc.rquotad [✎] [×]
📄 rpc.statd [✎] [×]
📄 rpcbind [✎] [×]
📄 rpcdebug [✎] [×]
📄 rpcinfo [✎] [×]
📄 rrestore [✎] [×]
📄 rsyslogd [✎] [×]
📄 rtacct [✎] [×]
📄 rtcwake [✎] [×]
📄 rtmon [✎] [×]
📄 rtpr [✎] [×]
📄 rtstat [✎] [×]
📄 runlevel [✎] [×]
📄 runuser [✎] [×]
📄 rvnamed-ng [✎] [×]
📄 sa [✎] [×]
📄 safe_finger [✎] [×]
📄 sasl2-shared-mechlist [✎] [×]
📄 saslauthd [✎] [×]
📄 sasldblistusers2 [✎] [×]
📄 saslpasswd2 [✎] [×]
📄 seaudit [✎] [×]
📄 sefcontext_compile [✎] [×]
📄 selabel_digest [✎] [×]
📄 selabel_lookup [✎] [×]
📄 selabel_lookup_best_match [✎] [×]
📄 selabel_partial_match [✎] [×]
📄 selinux_restorecon [✎] [×]
📄 selinuxconlist [✎] [×]
📄 selinuxdefcon [✎] [×]
📄 selinuxenabled [✎] [×]
📄 selinuxexeccon [✎] [×]
📄 semanage [✎] [×]
📄 semodule [✎] [×]
📄 sendmail [✎] [×]
📄 sendmail.postfix [✎] [×]
📄 sendmail.sendmail [✎] [×]
📄 service [✎] [×]
📄 sestatus [✎] [×]
📄 setcap [✎] [×]
📄 setenforce [✎] [×]
📄 setfiles [✎] [×]
📄 setpci [✎] [×]
📄 setquota [✎] [×]
📄 setregdomain [✎] [×]
📄 setsebool [✎] [×]
📄 setup [✎] [×]
📄 sfdisk [✎] [×]
📄 sgpio [✎] [×]
📄 showmount [✎] [×]
📄 shutdown [✎] [×]
📄 sim_server [✎] [×]
📄 slattach [✎] [×]
📄 sln [✎] [×]
📄 sm-notify [✎] [×]
📄 smartctl [✎] [×]
📄 smartd [✎] [×]
📄 smrsh [✎] [×]
📄 smtp-sink [✎] [×]
📄 smtp-source [✎] [×]
📄 sosreport [✎] [×]
📄 ss [✎] [×]
📄 sshd [✎] [×]
📄 sshd-keygen [✎] [×]
📄 start-statd [✎] [×]
📄 sulogin [✎] [×]
📄 sushell [✎] [×]
📄 swaplabel [✎] [×]
📄 swapoff [✎] [×]
📄 swapon [✎] [×]
📄 switch_root [✎] [×]
📄 sys-unconfig [✎] [×]
📄 sysctl [✎] [×]
📄 tc [✎] [×]
📄 tcpd [✎] [×]
📄 tcpdmatch [✎] [×]
📄 tcpdump [✎] [×]
📄 tcpslice [✎] [×]
📄 tcsd [✎] [×]
📄 telinit [✎] [×]
📄 testsaslauthd [✎] [×]
📄 thin_check [✎] [×]
📄 thin_delta [✎] [×]
📄 thin_dump [✎] [×]
📄 thin_ls [✎] [×]
📄 thin_metadata_size [✎] [×]
📄 thin_repair [✎] [×]
📄 thin_restore [✎] [×]
📄 thin_rmap [✎] [×]
📄 thin_trim [✎] [×]
📄 tickadj [✎] [×]
📄 tracepath [✎] [×]
📄 tracepath6 [✎] [×]
📄 try-from [✎] [×]
📄 tune2fs [✎] [×]
📄 tuned [✎] [×]
📄 tuned-adm [✎] [×]
📄 udevadm [✎] [×]
📄 umount.ecryptfs [✎] [×]
📄 umount.ecryptfs_private [✎] [×]
📄 umount.nfs [✎] [×]
📄 umount.nfs4 [✎] [×]
📄 unix_chkpwd [✎] [×]
📄 unix_update [✎] [×]
📄 unsquashfs [✎] [×]
📄 update-alternatives [✎] [×]
📄 update-pciids [✎] [×]
📄 update-smart-drivedb [✎] [×]
📄 uptrack-install [✎] [×]
📄 uptrack-remove [✎] [×]
📄 uptrack-show [✎] [×]
📄 uptrack-upgrade [✎] [×]
📄 usb_modeswitch [✎] [×]
📄 usb_modeswitch_dispatcher [✎] [×]
📄 useradd [✎] [×]
📄 userdel [✎] [×]
📄 userhelper [✎] [×]
📄 usermod [✎] [×]
📄 usernetctl [✎] [×]
📄 uuserver [✎] [×]
📄 vgcfgbackup [✎] [×]
📄 vgcfgrestore [✎] [×]
📄 vgchange [✎] [×]
📄 vgck [✎] [×]
📄 vgconvert [✎] [×]
📄 vgcreate [✎] [×]
📄 vgdisplay [✎] [×]
📄 vgexport [✎] [×]
📄 vgextend [✎] [×]
📄 vgimport [✎] [×]
📄 vgimportclone [✎] [×]
📄 vgmerge [✎] [×]
📄 vgmknodes [✎] [×]
📄 vgreduce [✎] [×]
📄 vgremove [✎] [×]
📄 vgrename [✎] [×]
📄 vgs [✎] [×]
📄 vgscan [✎] [×]
📄 vgsplit [✎] [×]
📄 vigr [✎] [×]
📄 vipw [✎] [×]
📄 virt-what [✎] [×]
📄 visudo [✎] [×]
📄 vmcore-dmesg [✎] [×]
📄 vpddecode [✎] [×]
📄 weak-modules [✎] [×]
📄 wipefs [✎] [×]
📄 wpa_cli [✎] [×]
📄 wpa_passphrase [✎] [×]
📄 wpa_supplicant [✎] [×]
📄 xfs_admin [✎] [×]
📄 xfs_bmap [✎] [×]
📄 xfs_copy [✎] [×]
📄 xfs_db [✎] [×]
📄 xfs_estimate [✎] [×]
📄 xfs_freeze [✎] [×]
📄 xfs_fsr [✎] [×]
📄 xfs_growfs [✎] [×]
📄 xfs_info [✎] [×]
📄 xfs_io [✎] [×]
📄 xfs_logprint [✎] [×]
📄 xfs_mdrestore [✎] [×]
📄 xfs_metadump [✎] [×]
📄 xfs_mkfile [✎] [×]
📄 xfs_ncheck [✎] [×]
📄 xfs_quota [✎] [×]
📄 xfs_repair [✎] [×]
📄 xfs_rtcp [✎] [×]
📄 xfsdump [✎] [×]
📄 xfsinvutil [✎] [×]
📄 xfsrestore [✎] [×]
📄 xqmstats [✎] [×]
📄 xtables-multi [✎] [×]
📄 ypbind [✎] [×]
📄 yppoll [✎] [×]
📄 ypset [✎] [×]
📄 yptest [✎] [×]
📄 yum-complete-transaction [✎] [×]
📄 yumdb [✎] [×]
📄 zdump [✎] [×]
📄 zic [✎] [×]
📄 zramctl [✎] [×]