✏️ Editing: dracut

#!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Generator script for a dracut initramfs
# Tries to retain some degree of compatibility with the command line
# of the various mkinitrd implementations out there
#

# Copyright 2005-2013 Red Hat, Inc.  All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

unset BASH_ENV

# store for logging
dracut_args=( "$@" )

set -o pipefail

usage() {
    [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
    if [[ -f $dracutbasedir/dracut-version.sh ]]; then
        . $dracutbasedir/dracut-version.sh
    fi

#                                                       80x25 linebreak here ^
    cat << EOF
Usage: $0 [OPTION]... [<initramfs> [<kernel-version>]]

Version: $DRACUT_VERSION

Creates initial ramdisk images for preloading modules

-h, --help  Display all options

If a [LIST] has multiple arguments, then you have to put these in quotes.

For example:

# dracut --add-drivers "module1 module2"  ...

EOF
}

long_usage() {
    [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
    if [[ -f $dracutbasedir/dracut-version.sh ]]; then
        . $dracutbasedir/dracut-version.sh
    fi

#                                                       80x25 linebreak here ^
    cat << EOF
Usage: $0 [OPTION]... [<initramfs> [<kernel-version>]]

Version: $DRACUT_VERSION

Creates initial ramdisk images for preloading modules

--kver [VERSION]      Set kernel version to [VERSION].
  -f, --force           Overwrite existing initramfs file.
  -a, --add [LIST]      Add a space-separated list of dracut modules.
  --rebuild         Append arguments to those of existing image and rebuild
  -m, --modules [LIST]  Specify a space-separated list of dracut modules to
                         call when building the initramfs. Modules are located
                         in /usr/lib/dracut/modules.d.
  -o, --omit [LIST]     Omit a space-separated list of dracut modules.
  --force-add [LIST]    Force to add a space-separated list of dracut modules
                         to the default set of modules, when -H is specified.
  -d, --drivers [LIST]  Specify a space-separated list of kernel modules to
                         exclusively include in the initramfs.
  --add-drivers [LIST]  Specify a space-separated list of kernel
                         modules to add to the initramfs.
  --force-drivers [LIST] Specify a space-separated list of kernel
                         modules to add to the initramfs and make sure they
                         are tried to be loaded via modprobe same as passing
                         rd.driver.pre=DRIVER kernel parameter.
  --omit-drivers [LIST] Specify a space-separated list of kernel
                         modules not to add to the initramfs.
  --filesystems [LIST]  Specify a space-separated list of kernel filesystem
                         modules to exclusively include in the generic
                         initramfs.
  -k, --kmoddir [DIR]   Specify the directory, where to look for kernel
                         modules
  --fwdir [DIR]         Specify additional directories, where to look for
                         firmwares, separated by :
  --kernel-only         Only install kernel drivers and firmware files
  --no-kernel           Do not install kernel drivers and firmware files
  --print-cmdline       Print the kernel command line for the given disk layout
  --early-microcode     Combine early microcode with ramdisk
  --no-early-microcode  Do not combine early microcode with ramdisk
  --kernel-cmdline [PARAMETERS] Specify default kernel command line parameters
  --strip               Strip binaries in the initramfs
  --nostrip             Do not strip binaries in the initramfs
  --prelink             Prelink binaries in the initramfs
  --noprelink           Do not prelink binaries in the initramfs
  --hardlink            Hardlink files in the initramfs
  --nohardlink          Do not hardlink files in the initramfs
  --prefix [DIR]        Prefix initramfs files with [DIR]
  --noprefix            Do not prefix initramfs files
  --mdadmconf           Include local /etc/mdadm.conf
  --nomdadmconf         Do not include local /etc/mdadm.conf
  --lvmconf             Include local /etc/lvm/lvm.conf
  --nolvmconf           Do not include local /etc/lvm/lvm.conf
  --fscks [LIST]        Add a space-separated list of fsck helpers.
  --nofscks             Inhibit installation of any fsck helpers.
  --ro-mnt              Mount / and /usr read-only by default.
  -h, --help            This message
  --debug               Output debug information of the build process
  --profile             Output profile information of the build process
  -L, --stdlog [0-6]    Specify logging level (to standard error)
                         0 - suppress any messages
                         1 - only fatal errors
                         2 - all errors
                         3 - warnings
                         4 - info
                         5 - debug info (here starts lots of output)
                         6 - trace info (and even more)
  -v, --verbose         Increase verbosity level
  -q, --quiet           Decrease verbosity level
  -c, --conf [FILE]     Specify configuration file to use.
                         Default: /etc/dracut.conf
  --confdir [DIR]       Specify configuration directory to use *.conf files
                         from. Default: /etc/dracut.conf.d
  --tmpdir [DIR]        Temporary directory to be used instead of default
                         /var/tmp.
  -l, --local           Local mode. Use modules from the current working
                         directory instead of the system-wide installed in
                         /usr/lib/dracut/modules.d.
                         Useful when running dracut from a git checkout.
  -H, --hostonly        Host-Only mode: Install only what is needed for
                        booting the local host instead of a generic host.
  -N, --no-hostonly     Disables Host-Only mode
  --hostonly-mode <mode>
                        Specify the hostonly mode to use. <mode> could be
                        one of "sloppy" or "strict". "sloppy" mode is used
                        by default.
                        In "sloppy" hostonly mode, extra drivers and modules
                        will be installed, so minor hardware change won't make
                        the image unbootable (eg. changed keyboard), and the
                        image is still portable among similar hosts.
                        With "strict" mode enabled, anything not necessary
                        for booting the local host in its current state will
                        not be included, and modules may do some extra job
                        to save more space. Minor change of hardware or
                        environment could make the image unbootable.
                        DO NOT use "strict" mode unless you know what you
                        are doing.
  --hostonly-cmdline    Store kernel command line arguments needed
                        in the initramfs
  --no-hostonly-cmdline Do not store kernel command line arguments needed
                        in the initramfs
  --no-hostonly-default-device
                        Do not generate implicit host devices like root,
                        swap, fstab, etc. Use "--mount" or "--add-device"
                        to explicitly add devices as needed.
  --hostonly-i18n       Install only needed keyboard and font files according
                        to the host configuration (default).
  --no-hostonly-i18n    Install all keyboard and font files available.
  --persistent-policy [POLICY]
                        Use [POLICY] to address disks and partitions.
                        POLICY can be any directory name found in /dev/disk.
                        E.g. "by-uuid", "by-label"
  --fstab               Use /etc/fstab to determine the root device.
  --add-fstab [FILE]    Add file to the initramfs fstab
  --mount "[DEV] [MP] [FSTYPE] [FSOPTS]"
                        Mount device [DEV] on mountpoint [MP] with filesystem
                        [FSTYPE] and options [FSOPTS] in the initramfs
  --add-device "[DEV]"  Bring up [DEV] in initramfs
  -i, --include [SOURCE] [TARGET]
                        Include the files in the SOURCE directory into the
                         Target directory in the final initramfs.
                        If SOURCE is a file, it will be installed to TARGET
                         in the final initramfs.
  -I, --install [LIST]  Install the space separated list of files into the
                         initramfs.
  --install-optional [LIST]  Install the space separated list of files into the
                         initramfs, if they exist.
  --gzip                Compress the generated initramfs using gzip.
                         This will be done by default, unless another
                         compression option or --no-compress is passed.
  --bzip2               Compress the generated initramfs using bzip2.
                         Make sure your kernel has bzip2 decompression support
                         compiled in, otherwise you will not be able to boot.
  --lzma                Compress the generated initramfs using lzma.
                         Make sure your kernel has lzma support compiled in,
                         otherwise you will not be able to boot.
  --xz                  Compress the generated initramfs using xz.
                         Make sure that your kernel has xz support compiled
                         in, otherwise you will not be able to boot.
  --lzo                  Compress the generated initramfs using lzop.
                         Make sure that your kernel has lzo support compiled
                         in, otherwise you will not be able to boot.
  --lz4                  Compress the generated initramfs using lz4.
                         Make sure that your kernel has lz4 support compiled
                         in, otherwise you will not be able to boot.
  --compress [COMPRESSION] Compress the generated initramfs with the
                         passed compression program.  Make sure your kernel
                         knows how to decompress the generated initramfs,
                         otherwise you will not be able to boot.
  --no-compress         Do not compress the generated initramfs.  This will
                         override any other compression options.
  --list-modules        List all available dracut modules.
  -M, --show-modules    Print included module's name to standard output during
                         build.
  --keep                Keep the temporary initramfs for debugging purposes
  --printsize           Print out the module install size
  --sshkey [SSHKEY]     Add ssh key to initramfs (use with ssh-client module)
  --logfile [FILE]      Logfile to use (overrides configuration setting)

If [LIST] has multiple arguments, then you have to put these in quotes.

For example:

# dracut --add-drivers "module1 module2"  ...

EOF
}

# function push()
# push values to a stack
# $1 = stack variable
# $2.. values
# example:
# push stack 1 2 "3 4"
push() {
    local _i
    local __stack=$1; shift
    for _i in "$@"; do
        eval ${__stack}'[${#'${__stack}'[@]}]="$_i"'
    done
}

# function pop()
# pops the last value from a stack
# assigns value to second argument variable
# or echo to stdout, if no second argument
# $1 = stack variable
# $2 = optional variable to store the value
# example:
# pop stack val
# val=$(pop stack)
pop() {
    local __stack=$1; shift
    local __resultvar=$1
    local _value;
    # check for empty stack
    eval '[[ ${#'${__stack}'[@]} -eq 0 ]] && return 1'

eval _value='${'${__stack}'[${#'${__stack}'[@]}-1]}'

if [[ "$__resultvar" ]]; then
        eval $__resultvar="'$_value'"
    else
        printf "%s" "$_value"
    fi
    eval unset ${__stack}'[${#'${__stack}'[@]}-1]'
    return 0
}

# Little helper function for reading args from the commandline.
# it automatically handles -a b and -a=b variants, and returns 1 if
# we need to shift $3.
read_arg() {
    # $1 = arg name
    # $2 = arg value
    # $3 = arg parameter
    local rematch='^[^=]*=(.*)$'
    if [[ $2 =~ $rematch ]]; then
        read "$1" <<< "${BASH_REMATCH[1]}"
    else
        read "$1" <<< "$3"
        # There is no way to shift our callers args, so
        # return 1 to indicate they should do it instead.
        return 1
    fi
}

dropindirs_sort()
{
    local suffix=$1; shift
    local -a files
    local f d

for d in "$@"; do
        for i in "$d/"*"$suffix"; do
            if [[ -e "$i" ]]; then
                printf "%s\n" "${i##*/}"
            fi
        done
    done | sort -Vu | {
        readarray -t files

for f in "${files[@]}"; do
            for d in "$@"; do
                if [[ -e "$d/$f" ]]; then
                    printf "%s\n" "$d/$f"
                    continue 2
                fi
            done
        done
    }
}

rearrange_params()
{
    # Workaround -i, --include taking 2 arguments
    set -- "${@/--include/++include}"

# This prevents any long argument ending with "-i"
    # -i, like --opt-i but I think we can just prevent that
    set -- "${@/%-i/++include}"

TEMP=$(unset POSIXLY_CORRECT; getopt \
        -o "a:m:o:d:I:k:c:L:fvqlHhMN" \
        --long kver: \
        --long add: \
        --long force-add: \
        --long add-drivers: \
        --long force-drivers: \
        --long omit-drivers: \
        --long modules: \
        --long omit: \
        --long drivers: \
        --long filesystems: \
        --long install: \
        --long install-optional: \
        --long fwdir: \
        --long libdirs: \
        --long fscks: \
        --long add-fstab: \
        --long mount: \
        --long device: \
        --long add-device: \
        --long nofscks: \
        --long ro-mnt \
        --long kmoddir: \
        --long conf: \
        --long confdir: \
        --long tmpdir: \
        --long stdlog: \
        --long compress: \
        --long prefix: \
        --long rebuild: \
        --long force \
        --long kernel-only \
        --long no-kernel \
        --long print-cmdline \
        --long kernel-cmdline: \
        --long strip \
        --long nostrip \
        --long prelink \
        --long noprelink \
        --long hardlink \
        --long nohardlink \
        --long noprefix \
        --long mdadmconf \
        --long nomdadmconf \
        --long lvmconf \
        --long nolvmconf \
        --long debug \
        --long profile \
        --long sshkey: \
        --long logfile: \
        --long verbose \
        --long quiet \
        --long local \
        --long hostonly \
        --long host-only \
        --long no-hostonly \
        --long no-host-only \
        --long hostonly-mode: \
        --long hostonly-cmdline \
        --long no-hostonly-cmdline \
        --long no-hostonly-default-device \
        --long persistent-policy: \
        --long fstab \
        --long help \
        --long bzip2 \
        --long lzma \
        --long xz \
        --long lzo \
        --long lz4 \
        --long no-compress \
        --long gzip \
        --long list-modules \
        --long show-modules \
        --long keep \
        --long printsize \
        --long regenerate-all \
        --long noimageifnotneeded \
        --long early-microcode \
        --long no-early-microcode \
        --long no-hostonly-i18n \
        --long hostonly-i18n \
        -- "$@")

if (( $? != 0 )); then
        usage
        exit 1
    fi
}

verbosity_mod_l=0
unset kernel
unset outfile

rearrange_params "$@"
eval set -- "$TEMP"

# parse command line args to check if '--rebuild' option is present
unset append_args_l
unset rebuild_file
while :
do
	if [ "$1" == "--" ]; then
	    shift; break
	fi
	if [ "$1" == "--rebuild" ]; then
	    append_args_l="yes"
            rebuild_file=$2
            if [ ! -e $rebuild_file ]; then
                echo "Image file '$rebuild_file', for rebuild, does not exist!"
                exit 1
            fi
            abs_rebuild_file=$(readlink -f "$rebuild_file") && rebuild_file="$abs_rebuild_file"
	    shift; continue
	fi
	shift
done

# get output file name and kernel version from command line arguments
while (($# > 0)); do
    case ${1%%=*} in
        ++include)
            shift 2;;
        *)
            if ! [[ ${outfile+x} ]]; then
                outfile=$1
            elif ! [[ ${kernel+x} ]]; then
                kernel=$1
            else
                printf "\nUnknown arguments: %s\n\n" "$*" >&2
                usage; exit 1;
            fi
            ;;
    esac
    shift
done

# extract input image file provided with rebuild option to get previous parameters, if any
if [[ $append_args_l == "yes" ]]; then
    unset rebuild_param

# determine resultant file
    if ! [[ $outfile ]]; then
        outfile=$rebuild_file
    fi

if ! rebuild_param=$(lsinitrd $rebuild_file '*lib/dracut/build-parameter.txt'); then
        echo "Image '$rebuild_file' has no rebuild information stored"
        exit 1
    fi

# prepend previous parameters to current command line args
    if [[ $rebuild_param ]]; then
        TEMP="$rebuild_param $TEMP"
        eval set -- "$TEMP"
        rearrange_params "$@"
    fi

# clean the temporarily used scratch-pad directory
    rm -rf $scratch_dir
fi

unset PARMS_TO_STORE
PARMS_TO_STORE=""

eval set -- "$TEMP"

while :; do
    if [ $1 != "--" ] && [ $1 != "--rebuild" ]; then
        PARMS_TO_STORE+=" $1";
    fi
    case $1 in
        --kver)        kernel="$2";                    PARMS_TO_STORE+=" '$2'"; shift;;
        -a|--add)      push add_dracutmodules_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --force-add)   push force_add_dracutmodules_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --add-drivers) push add_drivers_l        "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --force-drivers) push force_drivers_l    "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --omit-drivers) push omit_drivers_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        -m|--modules)  push dracutmodules_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        -o|--omit)     push omit_dracutmodules_l "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        -d|--drivers)  push drivers_l            "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --filesystems) push filesystems_l        "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        -I|--install)  push install_items_l      "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --install-optional)
                       push install_optional_items_l \
                                                 "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --fwdir)       push fw_dir_l             "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --libdirs)     push libdirs_l            "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --fscks)       push fscks_l              "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --add-fstab)   push add_fstab_l          "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --mount)       push fstab_lines          "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --add-device|--device)
                       push add_device_l         "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --kernel-cmdline) push kernel_cmdline_l  "$2"; PARMS_TO_STORE+=" '$2'"; shift;;
        --nofscks)     nofscks_l="yes";;
        --ro-mnt)      ro_mnt_l="yes";;
        -k|--kmoddir)  drivers_dir_l="$2";             PARMS_TO_STORE+=" '$2'"; shift;;
        -c|--conf)     conffile="$2";                  PARMS_TO_STORE+=" '$2'"; shift;;
        --confdir)     confdir="$2";                   PARMS_TO_STORE+=" '$2'"; shift;;
        --tmpdir)      tmpdir_l="$2";                  PARMS_TO_STORE+=" '$2'"; shift;;
        -L|--stdlog)   stdloglvl_l="$2";               PARMS_TO_STORE+=" '$2'"; shift;;
        --compress)    compress_l="$2";                PARMS_TO_STORE+=" '$2'"; shift;;
        --prefix)      prefix_l="$2";                  PARMS_TO_STORE+=" '$2'"; shift;;
        --rebuild)     if [ $rebuild_file == $outfile ]; then
                           force=yes
                       fi
                       shift
                       ;;
        -f|--force)    force=yes;;
        --kernel-only) kernel_only="yes"; no_kernel="no";;
        --no-kernel)   kernel_only="no"; no_kernel="yes";;
        --print-cmdline)
                       print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";;
        --early-microcode)
                       early_microcode_l="yes";;
        --no-early-microcode)
                       early_microcode_l="no";;
        --strip)       do_strip_l="yes";;
        --nostrip)     do_strip_l="no";;
        --prelink)     do_prelink_l="yes";;
        --noprelink)   do_prelink_l="no";;
        --hardlink)    do_hardlink_l="yes";;
        --nohardlink)  do_hardlink_l="no";;
        --noprefix)    prefix_l="/";;
        --mdadmconf)   mdadmconf_l="yes";;
        --nomdadmconf) mdadmconf_l="no";;
        --lvmconf)     lvmconf_l="yes";;
        --nolvmconf)   lvmconf_l="no";;
        --debug)       debug="yes";;
        --profile)     profile="yes";;
        --sshkey)      sshkey="$2";                    PARMS_TO_STORE+=" '$2'"; shift;;
        --logfile)     logfile_l="$2"; shift;;
        -v|--verbose)  ((verbosity_mod_l++));;
        -q|--quiet)    ((verbosity_mod_l--));;
        -l|--local)
                       allowlocal="yes"
                       [[ -f "$(readlink -f "${0%/*}")/dracut-init.sh" ]] \
                           && dracutbasedir="$(readlink -f "${0%/*}")"
                       ;;
        -H|--hostonly|--host-only)
                       hostonly_l="yes" ;;
        -N|--no-hostonly|--no-host-only)
                       hostonly_l="no" ;;
        --hostonly-mode)
                       hostonly_mode_l="$2";           PARMS_TO_STORE+=" '$2'"; shift;;
        --hostonly-cmdline)
                       hostonly_cmdline_l="yes" ;;
        --hostonly-i18n)
                       i18n_install_all_l="no" ;;
        --no-hostonly-i18n)
                       i18n_install_all_l="yes" ;;
        --no-hostonly-cmdline)
                       hostonly_cmdline_l="no" ;;
        --no-hostonly-default-device)
                       hostonly_default_device="no" ;;
        --persistent-policy)
                       persistent_policy_l="$2";       PARMS_TO_STORE+=" '$2'"; shift;;
        --fstab)       use_fstab_l="yes" ;;
        -h|--help)     long_usage; exit 1 ;;
        -i|--include)  push include_src "$2";          PARMS_TO_STORE+=" '$2'";
                       shift;;
        --bzip2)       compress_l="bzip2";;
        --lzma)        compress_l="lzma";;
        --xz)          compress_l="xz";;
        --lzo)         compress_l="lzo";;
        --lz4)         compress_l="lz4";;
        --no-compress) _no_compress_l="cat";;
        --gzip)        compress_l="gzip";;
        --list-modules) do_list="yes";;
        -M|--show-modules)
                       show_modules_l="yes"
                       ;;
        --keep)        keep="yes";;
        --printsize)   printsize="yes";;
        --regenerate-all) regenerate_all="yes";;
        --noimageifnotneeded) noimageifnotneeded="yes";;

--) shift; break;;

*)  # should not even reach this point
            printf "\n!Unknown option: '%s'\n\n" "$1" >&2; usage; exit 1;;
    esac
    shift
done

# getopt cannot handle multiple arguments, so just handle "-I,--include"
# the old fashioned way

while (($# > 0)); do
    if [ ${1%%=*} == "++include" ]; then
        push include_src "$2"
        push include_target "$3"
        PARMS_TO_STORE+=" --include '$2' '$3'"
        shift 2
    fi
    shift
done

if [[ $regenerate_all == "yes" ]]; then
    ret=0
    if [[ $kernel ]]; then
        printf -- "--regenerate-all cannot be called with a kernel version\n" >&2
        exit 1
    fi

if [[ $outfile ]]; then
        printf -- "--regenerate-all cannot be called with a image file\n" >&2
        exit 1
    fi

((len=${#dracut_args[@]}))
    for ((i=0; i < len; i++)); do
        [[ ${dracut_args[$i]} == "--regenerate-all" ]] && \
            unset dracut_args[$i]
    done

cd /lib/modules
    for i in *; do
        [[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue
        dracut --kver="$i" "${dracut_args[@]}"
        ((ret+=$?))
    done
    exit $ret
fi

if ! [[ $kernel ]]; then
    kernel=$(uname -r)
fi

if [[ $kernel ]]; then
    if ! [[ -d /lib/modules/$kernel ]] && [[ $no_kernel != yes ]]; then
        printf -- "Kernel version $kernel has no module directory /lib/modules/$kernel\n" >&2
    fi
fi

if ! [[ $outfile ]]; then
    [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id

if [[ $MACHINE_ID ]] && ( [[ -d /boot/${MACHINE_ID} ]] || [[ -L /boot/${MACHINE_ID} ]] ); then
        outfile="/boot/${MACHINE_ID}/$kernel/initrd"
    else
        outfile="/boot/initramfs-$kernel.img"
    fi
fi

for i in /usr/sbin /sbin /usr/bin /bin; do
    rl=$i
    if [ -L "$i" ]; then
        rl=$(readlink -f $i)
    fi
    if [[ "$NPATH" != *:$rl* ]] ; then
        NPATH+=":$rl"
    fi
done
export PATH="${NPATH#:}"
unset LC_MESSAGES
unset LC_CTYPE
export LC_ALL=C
export LANG=C
unset NPATH
unset LD_LIBRARY_PATH
unset LD_PRELOAD
unset GREP_OPTIONS

export DRACUT_LOG_LEVEL=warning
[[ $debug ]] && {
    export DRACUT_LOG_LEVEL=debug
    export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
    set -x
}

[[ $profile ]] && {
    export PS4='+ $(date "+%s.%N") ${BASH_SOURCE}@${LINENO}: ';
    set -x
    debug=yes
}

[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut

# if we were not passed a config file, try the default one
if [[ ! -f $conffile ]]; then
    if [[ $allowlocal ]]; then
        conffile="$dracutbasedir/dracut.conf"
    else
        conffile="/etc/dracut.conf"
    fi
fi

if [[ ! -d $confdir ]]; then
    if [[ $allowlocal ]]; then
        confdir="$dracutbasedir/dracut.conf.d"
    else
        confdir="/etc/dracut.conf.d"
    fi
fi

# source our config file
[[ -f $conffile ]] && . "$conffile"

# source our config dir
for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d"); do
    [[ -e $f ]] && . "$f"
done

# these optins add to the stuff in the config file
if (( ${#add_dracutmodules_l[@]} )); then
    while pop add_dracutmodules_l val; do
        add_dracutmodules+=" $val "
    done
fi

if (( ${#force_add_dracutmodules_l[@]} )); then
    while pop force_add_dracutmodules_l val; do
        force_add_dracutmodules+=" $val "
    done
fi

if (( ${#fscks_l[@]} )); then
    while pop fscks_l val; do
        fscks+=" $val "
    done
fi

if (( ${#add_fstab_l[@]} )); then
    while pop add_fstab_l val; do
        add_fstab+=" $val "
    done
fi

if (( ${#fstab_lines_l[@]} )); then
    while pop fstab_lines_l val; do
        push fstab_lines $val
    done
fi

if (( ${#install_items_l[@]} )); then
    while pop install_items_l val; do
        install_items+=" $val "
    done
fi

if (( ${#install_optional_items_l[@]} )); then
    while pop install_optional_items_l val; do
        install_optional_items+=" $val "
    done
fi

# these options override the stuff in the config file
if (( ${#dracutmodules_l[@]} )); then
    dracutmodules=''
    while pop dracutmodules_l val; do
        dracutmodules+="$val "
    done
fi

if (( ${#omit_dracutmodules_l[@]} )); then
    omit_dracutmodules=''
    while pop omit_dracutmodules_l val; do
        omit_dracutmodules+="$val "
    done
fi

if (( ${#filesystems_l[@]} )); then
    filesystems=''
    while pop filesystems_l val; do
        filesystems+="$val "
    done
fi

if (( ${#fw_dir_l[@]} )); then
    fw_dir=''
    while pop fw_dir_l val; do
        fw_dir+="$val "
    done
fi

if (( ${#libdirs_l[@]} )); then
    libdirs=''
    while pop libdirs_l val; do
        libdirs+="$val "
    done
fi

[[ $stdloglvl_l ]] && stdloglvl=$stdloglvl_l
[[ ! $stdloglvl ]] && stdloglvl=4
stdloglvl=$((stdloglvl + verbosity_mod_l))
((stdloglvl > 6)) && stdloglvl=6
((stdloglvl < 0)) && stdloglvl=0

[[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l
[[ $do_strip_l ]] && do_strip=$do_strip_l
[[ $do_strip ]] || do_strip=yes
[[ $do_prelink_l ]] && do_prelink=$do_prelink_l
[[ $do_prelink ]] || do_prelink=yes
[[ $do_hardlink_l ]] && do_hardlink=$do_hardlink_l
[[ $do_hardlink ]] || do_hardlink=yes
[[ $prefix_l ]] && prefix=$prefix_l
[[ $prefix = "/" ]] && unset prefix
[[ $hostonly_l ]] && hostonly=$hostonly_l
[[ $hostonly_cmdline_l ]] && hostonly_cmdline=$hostonly_cmdline_l
[[ $hostonly_mode_l ]] && hostonly_mode=$hostonly_mode_l
[[ $i18n_install_all_l ]] && i18n_install_all=$i18n_install_all_l
[[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l
[[ $use_fstab_l ]] && use_fstab=$use_fstab_l
[[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
[[ $lvmconf_l ]] && lvmconf=$lvmconf_l
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
[[ $fw_dir ]] || fw_dir="/lib/firmware/updates /lib/firmware /lib/firmware/$kernel"
[[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
[[ $tmpdir ]] || tmpdir=/var/tmp
[[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS
[[ $compress_l ]] && compress=$compress_l
[[ $show_modules_l ]] && show_modules=$show_modules_l
[[ $nofscks_l ]] && nofscks="yes"
[[ $ro_mnt_l ]] && ro_mnt="yes"
[[ $early_microcode_l ]] && early_microcode=$early_microcode_l
[[ $early_microcode ]] || early_microcode=no
[[ $logfile_l ]] && logfile="$logfile_l"
# eliminate IFS hackery when messing with fw_dir
fw_dir=${fw_dir//:/ }

# handle compression options.
[[ $compress ]] || compress="gzip"
case $compress in
    bzip2) compress="bzip2 -9";;
    lzma)  compress="lzma -9 -T0";;
    xz)    compress="xz --check=crc32 --lzma2=dict=1MiB -T0";;
    gzip)  compress="gzip -9"; command -v pigz > /dev/null 2>&1 && compress="pigz -9";;
    lzo)   compress="lzop -9";;
    lz4)   compress="lz4 -l -9";;
esac
if [[ $_no_compress_l = "cat" ]]; then
    compress="cat"
fi

[[ $hostonly = yes ]] && hostonly="-h"
[[ $hostonly != "-h" ]] && unset hostonly

case $hostonly_mode in
    '')
        [[ $hostonly ]] && hostonly_mode="sloppy" ;;
    sloppy|strict)
        if [[ ! $hostonly ]]; then
            unset hostonly_mode
        fi
        ;;
    *)
        printf "%s\n" "dracut: Invalid hostonly mode '$hostonly_mode'." >&2
        exit 1
esac

readonly TMPDIR="$tmpdir"
readonly DRACUT_TMPDIR="$(mktemp -p "$TMPDIR/" -d -t dracut.XXXXXX)"
[ -d "$DRACUT_TMPDIR" ] || {
    printf "%s\n" "dracut: mktemp -p '$TMPDIR/' -d -t dracut.XXXXXX failed." >&2
    exit 1
}

# clean up after ourselves no matter how we die.
trap '
    ret=$?;
    [[ $keep ]] && echo "Not removing $DRACUT_TMPDIR." >&2 || { [[ $DRACUT_TMPDIR ]] && rm -rf -- "$DRACUT_TMPDIR"; };
    exit $ret;
    ' EXIT

# clean up after ourselves no matter how we die.
trap 'exit 1;' SIGINT

readonly initdir="${DRACUT_TMPDIR}/initramfs"
mkdir "$initdir"

export DRACUT_KERNEL_LAZY="1"
export DRACUT_RESOLVE_LAZY="1"

if [[ $print_cmdline ]]; then
    stdloglvl=0
    sysloglvl=0
    fileloglvl=0
    kmsgloglvl=0
fi

if [[ -f $dracutbasedir/dracut-version.sh ]]; then
    . $dracutbasedir/dracut-version.sh
fi

if [[ -f $dracutbasedir/dracut-init.sh ]]; then
    . $dracutbasedir/dracut-init.sh
else
    printf "%s\n" "dracut: Cannot find $dracutbasedir/dracut-init.sh." >&2
    printf "%s\n" "dracut: Are you running from a git checkout?" >&2
    printf "%s\n" "dracut: Try passing -l as an argument to $0" >&2
    exit 1
fi

if ! [[ $print_cmdline ]]; then
    inst /bin/sh
    if ! $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R "$initdir/bin/sh" &>/dev/null; then
        unset DRACUT_RESOLVE_LAZY
        export DRACUT_RESOLVE_DEPS=1
    fi
    rm -fr -- ${initdir}/*
fi

# Verify bash version, current minimum is 3.1
if (( BASH_VERSINFO[0] < 4 )); then
    dfatal 'You need at least Bash 4 to use dracut, sorry.'
    exit 1
fi

dracutfunctions=$dracutbasedir/dracut-functions.sh
export dracutfunctions

case "$(arch)" in
    i686|x86_64)
        ;;
    *)
        if [[ $early_microcode = yes ]]; then
            early_microcode=no
            dinfo "Disabling early microcode for $(arch)"
        fi
        ;;
esac

if [[ $early_microcode = yes ]] || ( [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]] ); then
    readonly early_cpio_dir="${DRACUT_TMPDIR}/earlycpio"
    mkdir "$early_cpio_dir"
fi

if (( ${#drivers_l[@]} )); then
    drivers=''
    while pop drivers_l val; do
        drivers+="$val "
    done
fi
drivers=${drivers/-/_}

if (( ${#add_drivers_l[@]} )); then
    while pop add_drivers_l val; do
        add_drivers+=" $val "
    done
fi
add_drivers=${add_drivers/-/_}

if (( ${#force_drivers_l[@]} )); then
    while pop force_drivers_l val; do
        force_drivers+=" $val "
    done
fi
force_drivers=${force_drivers/-/_}

if (( ${#omit_drivers_l[@]} )); then
    while pop omit_drivers_l val; do
        omit_drivers+=" $val "
    done
fi
omit_drivers=${omit_drivers/-/_}

if (( ${#kernel_cmdline_l[@]} )); then
    while pop kernel_cmdline_l val; do
        kernel_cmdline+=" $val "
    done
fi

omit_drivers_corrected=""
for d in $omit_drivers; do
    [[ " $drivers $add_drivers " == *\ $d\ * ]] && continue
    [[ " $drivers $force_drivers " == *\ $d\ * ]] && continue
    omit_drivers_corrected+="$d|"
done
omit_drivers="${omit_drivers_corrected%|}"
unset omit_drivers_corrected

# prepare args for logging
for ((i=0; i < ${#dracut_args[@]}; i++)); do
    [[ "${dracut_args[$i]}" == *\ * ]] && \
        dracut_args[$i]="\"${dracut_args[$i]}\""
        #" keep vim happy
done

dinfo "Executing: $0 ${dracut_args[@]}"

[[ $do_list = yes ]] && {
    for mod in $dracutbasedir/modules.d/*; do
        [[ -d $mod ]] || continue;
        [[ -e $mod/install || -e $mod/installkernel || \
            -e $mod/module-setup.sh ]] || continue
        printf "%s\n" "${mod##*/??}"
    done
    exit 0
}

# This is kinda legacy -- eventually it should go away.
case $dracutmodules in
    ""|auto) dracutmodules="all" ;;
esac

abs_outfile=$(readlink -f "$outfile") && outfile="$abs_outfile"

if [[ -d $srcmods ]]; then
    if ! [[ -f $srcmods/modules.dep ]]; then
        if [[ -n "$(find "$srcmods" -name '*.ko*')" ]]; then
            dfatal "$srcmods/modules.dep is missing. Did you run depmod?"
            exit 1
        else
            dwarn "$srcmods/modules.dep is missing. Did you run depmod?"
        fi
    fi
fi

if [[ ! $print_cmdline ]]; then
    if [[ -f $outfile && ! $force ]]; then
        dfatal "Will not override existing initramfs ($outfile) without --force"
        exit 1
    fi

outdir=${outfile%/*}
    [[ $outdir ]] || outdir="/"

if [[ ! -d "$outdir" ]]; then
        dfatal "Can't write to $outdir: Directory $outdir does not exist or is not accessible."
        exit 1
    elif [[ ! -w "$outdir" ]]; then
        dfatal "No permission to write to $outdir."
        exit 1
    elif [[ -f "$outfile" && ! -w "$outfile" ]]; then
        dfatal "No permission to write $outfile."
        exit 1
    fi
fi

# Need to be able to have non-root users read stuff (rpcbind etc)
chmod 755 "$initdir"

if [[ $hostonly ]]; then
    for i in /sys /proc /run /dev; do
        if ! findmnt --target "$i" &>/dev/null; then
            dwarning "Turning off host-only mode: '$i' is not mounted!"
            unset hostonly
        fi
    done
fi

declare -A host_fs_types

for line in "${fstab_lines[@]}"; do
    set -- $line
    #dev mp fs fsopts
    push host_devs "$1"
    host_fs_types["$1"]="$3"
done

for f in $add_fstab; do
    [[ -e $f ]] || continue
    while read dev rest; do
        push host_devs "$dev"
    done < "$f"
done

for dev in $add_device; do
    push host_devs "$dev"
done

if (( ${#add_device_l[@]} )); then
    while pop add_device_l val; do
        add_device+=" $val "
        push host_devs "$val"
    done
fi

if [[ $hostonly ]] && [[ "$hostonly_default_device" != "no" ]]; then
    # in hostonly mode, determine all devices, which have to be accessed
    # and examine them for filesystem types

for mp in \
        "/" \
        "/etc" \
        "/bin" \
        "/sbin" \
        "/lib" \
        "/lib64" \
        "/usr" \
        "/usr/bin" \
        "/usr/sbin" \
        "/usr/lib" \
        "/usr/lib64" \
        "/boot" \
        "/boot/efi" \
        ;
    do
        mp=$(readlink -f "$mp")
        mountpoint "$mp" >/dev/null 2>&1 || continue
        _dev=$(find_block_device "$mp")
        _bdev=$(readlink -f "/dev/block/$_dev")
        [[ -b $_bdev ]] && _dev=$_bdev
        push host_devs $_dev
        [[ "$mp" == "/" ]] && root_dev="$_dev"
        push host_devs "$_dev"
    done

if [[ -f /proc/swaps ]] && [[ -f /etc/fstab ]]; then
        while read dev type rest; do
            [[ -b $dev ]] || continue
            [[ "$type" == "partition" ]] || continue

while read _d _m _t _o _r; do
                [[ "$_d" == \#* ]] && continue
                [[ $_d ]] || continue
                [[ $_t != "swap" ]] && continue
                [[ $_m != "swap" ]] && [[ $_m != "none" ]] && continue
                [[ "$_o" == *noauto* ]] && continue
                _d=$(expand_persistent_dev "$_d")
                [[ "$_d" -ef "$dev" ]] || continue

if [[ -f /etc/crypttab ]]; then
                    while read _mapper _a _p _o || [ -n "$_mapper" ]; do
                        [[ $_mapper = \#* ]] && continue
                        [[ "$_d" -ef /dev/mapper/"$_mapper" ]] || continue
                        [[ "$_o" ]] || _o="$_p"
                        # skip entries with password files
                        [[ "$_p" == /* ]] && [[ -f $_p ]] && continue 2
                        # skip mkswap swap
                        [[ $_o == *swap* ]] && continue 2
                    done < /etc/crypttab
                fi

_dev="$(readlink -f "$dev")"
                push host_devs "$_dev"
                push swap_devs "$_dev"
                break
            done < /etc/fstab
        done < /proc/swaps
    fi

# collect all "x-initrd.mount" entries from /etc/fstab
    if [[ -f /etc/fstab ]]; then
        while read _d _m _t _o _r || [ -n "$_d" ]; do
            [[ "$_d" == \#* ]] && continue
            [[ $_d ]] || continue
            [[ "$_o" != *x-initrd.mount* ]] && continue
            _dev=$(expand_persistent_dev "$_d")
            _dev="$(readlink -f "$_dev")"
            [[ -b $_dev ]] && push host_devs "$_dev"
        done < /etc/fstab
    fi
fi

if [[ $hostonly ]]; then
    # record all host modaliases
    declare -A host_modalias
    find  /sys/devices/ -name uevent -print > "$initdir/.modalias"
    while read m; do
        while read line; do
            [[ "$line" != MODALIAS\=* ]] && continue
            modalias="${line##MODALIAS=}" && [[ $modalias ]] && host_modalias["$modalias"]=1
            break
        done < "$m"
    done < "$initdir/.modalias"

rm -f -- "$initdir/.modalias"

while read _k _s _v; do
        [ "$_k" != "name" -a "$_k" != "driver" ] && continue
        host_modalias["$_v"]=1
    done </proc/crypto

# check /proc/modules
    declare -A host_modules
    declare new_module_found=1
    declare tmpmodules=$(mktemp --tmpdir="$TMPDIR/" -t proc_modules.XXXXXX)
    while [[ $new_module_found ]]; do
        new_module_found=
        sleep 0.1
        #reading from procfs can be broken, so copy the file elsewhere
        cp -f /proc/modules "$tmpmodules"
        while read m rest; do
            [ -z "$m" ] && continue
            [[ ${host_modules["$m"]} ]] && continue
            host_modules["$m"]=1
            new_module_found=1
        done < "$tmpmodules"
    done
    rm "$tmpmodules"
    unset new_module_found
    unset tmpmodules
fi

unset m
unset rest

_get_fs_type() {
    [[ $1 ]] || return
    if [[ -b /dev/block/$1 ]]; then
        ID_FS_TYPE=$(get_fs_env "/dev/block/$1") && host_fs_types["$(readlink -f "/dev/block/$1")"]="$ID_FS_TYPE"
        return 1
    fi
    if [[ -b $1 ]]; then
        ID_FS_TYPE=$(get_fs_env "$1") && host_fs_types["$(readlink -f "$1")"]="$ID_FS_TYPE"
        return 1
    fi
    if fstype=$(find_dev_fstype "$1"); then
        host_fs_types["$1"]="$fstype"
        return 1
    fi
    return 1
}

for dev in "${host_devs[@]}"; do
    _get_fs_type "$dev"
    check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
done

for dev in "${!host_fs_types[@]}"; do
    [[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
    rootopts=$(find_dev_fsopts "$dev")
    if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
        journaldev=$(fs_get_option $rootopts "jdev")
    elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
        journaldev=$(fs_get_option $rootopts "logdev")
    fi
    if [[ $journaldev ]]; then
        dev="$(readlink -f "$dev")"
        push host_devs "$dev"
        _get_fs_type "$dev"
        check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
    fi
done

# also put the additional filesystems in host_fs_types
# so that the according modules are installed.
for fs in $filesystems; do
    host_fs_types[$fs]="$fs"
done

[[ -d $udevdir ]] \
    || udevdir="$(pkg-config udev --variable=udevdir 2>/dev/null)"
if ! [[ -d "$udevdir" ]]; then
    [[ -d /lib/udev ]] && udevdir=/lib/udev
    [[ -d /usr/lib/udev ]] && udevdir=/usr/lib/udev
fi

[[ -d $systemdutildir ]] \
    || systemdutildir=$(pkg-config systemd --variable=systemdutildir 2>/dev/null)

if ! [[ -d "$systemdutildir" ]]; then
    [[ -d /lib/systemd ]] && systemdutildir=/lib/systemd
    [[ -d /usr/lib/systemd ]] && systemdutildir=/usr/lib/systemd
fi

[[ -d $systemdsystemunitdir ]] \
    || systemdsystemunitdir=$(pkg-config systemd --variable=systemdsystemunitdir 2>/dev/null)

[[ -d "$systemdsystemunitdir" ]] || systemdsystemunitdir=${systemdutildir}/system

[[ -d $systemdsystemconfdir ]] \
    || systemdsystemconfdir=$(pkg-config systemd --variable=systemdsystemconfdir 2>/dev/null)

[[ -d "$systemdsystemconfdir" ]] || systemdsystemconfdir=/etc/systemd/system

[[ -d $tmpfilesdir ]] \
    || tmpfilesdir=$(pkg-config systemd --variable=tmpfilesdir 2>/dev/null)

if ! [[ -d "$tmpfilesdir" ]]; then
    [[ -f /lib/tmpfiles.d ]] && tmpfilesdir=/lib/tmpfiles.d
    [[ -f /usr/lib/tmpfiles.d ]] && tmpfilesdir=/usr/lib/tmpfiles.d
fi

export initdir dracutbasedir \
    dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \
    mods_to_load \
    fw_dir drivers_dir debug no_kernel kernel_only \
    omit_drivers mdadmconf lvmconf root_dev \
    use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
    stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
    debug host_fs_types host_devs swap_devs sshkey add_fstab \
    DRACUT_VERSION udevdir prefix filesystems drivers \
    systemdutildir systemdsystemunitdir systemdsystemconfdir \
    host_modalias host_modules hostonly_cmdline loginstall \
    tmpfilesdir

mods_to_load=""
# check all our modules to see if they should be sourced.
# This builds a list of modules that we will install next.
for_each_module_dir check_module
for_each_module_dir check_mount

dracut_module_included "fips" && export DRACUT_FIPS_MODE=1

if [[ $print_cmdline ]]; then
    modules_loaded=" "
    # source our modules.
    for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
        _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
        module_cmdline "$_d_mod"
    done
    unset moddir
    printf "\n"
    exit 0
fi

# Create some directory structure first
[[ $prefix ]] && mkdir -m 0755 -p "${initdir}${prefix}"

[[ -h /lib ]] || mkdir -m 0755 -p "${initdir}${prefix}/lib"
[[ $prefix ]] && ln -sfn "${prefix#/}/lib" "$initdir/lib"

if [[ $prefix ]]; then
    for d in bin etc lib sbin tmp usr var $libdirs; do
        [[ "$d" == */* ]] && continue
        ln -sfn "${prefix#/}/${d#/}" "$initdir/$d"
    done
fi

if [[ $kernel_only != yes ]]; then
    for d in usr/bin usr/sbin bin etc lib sbin tmp usr var $libdirs; do
        [[ -e "${initdir}${prefix}/$d" ]] && continue
        if [ -L "/$d" ]; then
            inst_symlink "/$d" "${prefix}/$d"
        else
            mkdir -m 0755 -p "${initdir}${prefix}/$d"
        fi
    done

for d in dev proc sys sysroot root run; do
        if [ -L "/$d" ]; then
            inst_symlink "/$d"
        else
            mkdir -m 0755 -p "$initdir/$d"
        fi
    done

ln -sfn ../run "$initdir/var/run"
    ln -sfn ../run/lock "$initdir/var/lock"
else
    for d in lib "$libdir"; do
        [[ -e "${initdir}${prefix}/$d" ]] && continue
        if [ -h "/$d" ]; then
            inst "/$d" "${prefix}/$d"
        else
            mkdir -m 0755 -p "${initdir}${prefix}/$d"
        fi
    done
fi

if [[ $kernel_only != yes ]]; then
    mkdir -p "${initdir}/etc/cmdline.d"
    for _d in $hookdirs; do
        mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d
    done
    if [[ "$UID" = "0" ]]; then
        [ -c ${initdir}/dev/null ] || mknod ${initdir}/dev/null c 1 3
        [ -c ${initdir}/dev/kmsg ] || mknod ${initdir}/dev/kmsg c 1 11
        [ -c ${initdir}/dev/console ] || mknod ${initdir}/dev/console c 5 1
    fi
fi

_isize=0 #initramfs size
modules_loaded=" "
# source our modules.
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
    _d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
    if [[ "$mods_to_load" == *\ $_d_mod\ * ]]; then
        if [[ $show_modules = yes ]]; then
            printf "%s\n" "$_d_mod"
        else
            dinfo "*** Including module: $_d_mod ***"
        fi
        if [[ $kernel_only == yes ]]; then
            module_installkernel "$_d_mod" || {
                dfatal "installkernel failed in module $_d_mod"
                exit 1
            }
        else
            module_install "$_d_mod"
            if [[ $no_kernel != yes ]]; then
                module_installkernel "$_d_mod" || {
                    dfatal "installkernel failed in module $_d_mod"
                    exit 1
                }
            fi
        fi
        mods_to_load=${mods_to_load// $_d_mod /}
        modules_loaded+="$_d_mod "

#print the module install size
        if [ -n "$printsize" ]; then
            _isize_new=$(du -sk ${initdir}|cut -f1)
            _isize_delta=$((_isize_new - _isize))
            printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
            _isize=$_isize_new
        fi
    fi
done
unset moddir

for i in $modules_loaded; do
    mkdir -p $initdir/lib/dracut
    printf "%s\n" "$i" >> $initdir/lib/dracut/modules.txt
done

dinfo "*** Including modules done ***"

## final stuff that has to happen
if [[ $no_kernel != yes ]]; then
    if [[ $hostonly ]]; then
        echo "$(get_loaded_kernel_modules)" > $initdir/lib/dracut/loaded-kernel-modules.txt
    fi

if [[ $drivers ]]; then
        hostonly='' instmods $drivers
    fi

if [[ $add_drivers ]]; then
        hostonly='' instmods -c $add_drivers
    fi
    if [[ $force_drivers ]]; then
        hostonly='' instmods -c $force_drivers
        rm -f $initdir/etc/cmdline.d/20-force_driver.conf
        for mod in $force_drivers; do
            echo "rd.driver.pre=$mod" >>$initdir/etc/cmdline.d/20-force_drivers.conf
        done
    fi
    if [[ $filesystems ]]; then
        hostonly='' instmods -c $filesystems
    fi

dinfo "*** Installing kernel module dependencies and firmware ***"
    dracut_kernel_post
    dinfo "*** Installing kernel module dependencies and firmware done ***"

if [[ $noimageifnotneeded == yes ]] && [[ $hostonly ]]; then
        if [[ ! -f "$initdir/lib/dracut/need-initqueue" ]] && \
            [[ -f ${initdir}/lib/modules/$kernel/modules.dep && ! -s ${initdir}/lib/modules/$kernel/modules.dep ]]; then
            for i in ${initdir}/etc/cmdline.d/*.conf; do
                # We need no initramfs image and do not generate one.
                [[ $i == "${initdir}/etc/cmdline.d/*.conf" ]] && exit 0
            done
        fi
    fi
fi

if [[ $kernel_only != yes ]]; then
    (( ${#install_items[@]} > 0 )) && inst_multiple ${install_items[@]}
    (( ${#install_optional_items[@]} > 0 )) && inst_multiple -o ${install_optional_items[@]}

[[ $kernel_cmdline ]] && printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf"

while pop fstab_lines line; do
        line=($line)
        [ -z "${line[3]}" ] && line[3]="defaults"
        [ -z "${line[4]}" ] && line[4]="0"
        [ -z "${line[5]}" ] && line[5]="2"
        strstr "${line[2]}" "nfs" && line[5]="0"
        echo "${line[@]}" >> "${initdir}/etc/fstab"
    done

for f in $add_fstab; do
        cat "$f" >> "${initdir}/etc/fstab"
    done

if [ -d ${initdir}/$systemdutildir ]; then
        mkdir -p ${initdir}/etc/conf.d
        {
            printf "%s\n" "systemdutildir=\"$systemdutildir\""
            printf "%s\n" "systemdsystemunitdir=\"$systemdsystemunitdir\""
            printf "%s\n" "systemdsystemconfdir=\"$systemdsystemconfdir\""
        } > ${initdir}/etc/conf.d/systemd.conf
    fi

if [[ $DRACUT_RESOLVE_LAZY ]] && [[ $DRACUT_INSTALL ]]; then
        dinfo "*** Resolving executable dependencies ***"
        find "$initdir" -type f \
            '(' -perm -0100 -or -perm -0010 -or -perm -0001 ')' \
            -not -path '*.ko' -print0 \
        | xargs -r -0 $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R ${DRACUT_FIPS_MODE:+-H} --
        dinfo "*** Resolving executable dependencies done***"
    fi
fi

while pop include_src src && pop include_target target; do
    if [[ $src && $target ]]; then
        if [[ -f $src ]]; then
            inst $src $target
        else
            ddebug "Including directory: $src"
            destdir="${initdir}/${target}"
            mkdir -p "$destdir"
            # check for preexisting symlinks, so we can cope with the
            # symlinks to $prefix
            # Objectname is a file or a directory
            for objectname in "$src"/*; do
                [[ -e "$objectname" || -h "$objectname" ]] || continue
                if [[ -d "$objectname" ]]; then
                    # objectname is a directory, let's compute the final directory name
                    object_destdir=${destdir}/${objectname#$src/}
                    if ! [[ -e "$object_destdir" ]]; then
                        mkdir -m 0755 -p "$object_destdir"
                        chmod --reference="$objectname" "$object_destdir"
                    fi
                    cp --reflink=auto --sparse=auto -fa -t "$object_destdir" "$objectname"/*
                else
                    cp --reflink=auto --sparse=auto -fa -t "$destdir" "$objectname"
                fi
            done
        fi
    fi
done

if [[ $kernel_only != yes ]]; then
    # make sure that library links are correct and up to date
    for f in /etc/ld.so.conf /etc/ld.so.conf.d/*; do
        [[ -f $f ]] && inst_simple "$f"
    done
    if ! ldconfig -r "$initdir"; then
        if [[ $UID = 0 ]]; then
            derror "ldconfig exited ungracefully"
        else
            derror "ldconfig might need uid=0 (root) for chroot()"
        fi
    fi
fi

PRELINK_BIN="$(command -v prelink)"
if [[ $UID = 0 ]] && [[ $PRELINK_BIN ]]; then
    if [[ $DRACUT_FIPS_MODE ]]; then
        dinfo "*** Installing prelink files ***"
        inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf /etc/prelink.cache
    elif [[ $do_prelink == yes ]]; then
        dinfo "*** Pre-linking files ***"
        inst_multiple -o prelink /etc/prelink.conf /etc/prelink.conf.d/*.conf
        chroot "$initdir" "$PRELINK_BIN" -a
        rm -f -- "$initdir/$PRELINK_BIN"
        rm -fr -- "$initdir"/etc/prelink.*
        dinfo "*** Pre-linking files done ***"
    fi
fi

if [[ $do_hardlink = yes ]] && command -v hardlink >/dev/null; then
    dinfo "*** Hardlinking files ***"
    hardlink "$initdir" 2>&1
    dinfo "*** Hardlinking files done ***"
fi

# strip binaries
if [[ $do_strip = yes ]] ; then
    for p in strip xargs find; do
        if ! type -P $p >/dev/null; then
            dinfo "Could not find '$p'. Not stripping the initramfs."
            do_strip=no
        fi
    done
fi

if [[ $do_strip = yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then
    dinfo "*** Stripping files ***"
    find "$initdir" -type f \
        -executable -not -path '*/lib/modules/*.ko' -print0 \
        | xargs -r -0 strip -g 2>/dev/null

# strip kernel modules, but do not touch signed modules
    find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \
        | while read -r -d $'\0' f; do
        SIG=$(tail -c 28 "$f")
        [[ $SIG == '~Module signature appended~' ]] || { printf "%s\000" "$f"; }
    done | xargs -r -0 strip -g

dinfo "*** Stripping files done ***"
fi

if [[ $early_microcode = yes ]]; then
    dinfo "*** Generating early-microcode cpio image contents ***"
    ucode_dir=(amd-ucode intel-ucode)
    ucode_dest=(AuthenticAMD.bin GenuineIntel.bin)
    _dest_dir="$early_cpio_dir/d/kernel/x86/microcode"
    _dest_idx="0 1"
    mkdir -p $_dest_dir
    if [[ $hostonly ]]; then
        [[ $(get_cpu_vendor) == "AMD" ]] && _dest_idx="0"
        [[ $(get_cpu_vendor) == "Intel" ]] && _dest_idx="1"
    fi
    for idx in $_dest_idx; do
        _fw=${ucode_dir[$idx]}
        for _fwdir in $fw_dir; do
            if [[ -d $_fwdir && -d $_fwdir/$_fw ]]; then
                _src="*"
                dinfo "*** Constructing ${ucode_dest[$idx]} ****"
                if [[ $hostonly ]]; then
                    _src=$(get_ucode_file)
                    [[ $_src ]] || break
                    [[ -r $_fwdir/$_fw/$_src ]] || break
                fi

for i in $_fwdir/$_fw/$_src; do
                    [ -e "$i" ] && break
                    break 2
                done
                for i in $_fwdir/$_fw/$_src; do
                    [[ -e "$i" ]] || continue
                    # skip gpg files
                    str_ends "$i" ".asc" && continue
                    cat "$i" >> $_dest_dir/${ucode_dest[$idx]}
                done
                create_early_cpio="yes"
            fi
        done
    done
    if ! [[ $create_early_cpio = yes ]]; then
        dinfo "*** No early-microcode cpio image needed ***"
    fi
fi

if [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]]; then
    dinfo "*** Packaging ACPI tables to override BIOS provided ones ***"
    _dest_dir="$early_cpio_dir/d/kernel/firmware/acpi"
    mkdir -p $_dest_dir
    for table in $acpi_table_dir/*.aml; do
        dinfo "   Adding ACPI table: $table"
        cp $table $_dest_dir
        create_early_cpio="yes"
    done
fi

dinfo "*** Store current command line parameters ***"
if ! ( echo $PARMS_TO_STORE > $initdir/lib/dracut/build-parameter.txt ); then
    dfatal "Could not store the current command line parameters"
    exit 1
fi

rm -f -- "$outfile"
dinfo "*** Creating image file ***"

[[ "$UID" != 0 ]] && cpio_owner_root="-R 0:0"

if [[ $create_early_cpio = yes ]]; then
    dinfo "*** Creating microcode section ***"
    echo 1 > "$early_cpio_dir/d/early_cpio"
    # The microcode blob is _before_ the initramfs blob, not after
    if ! (
            umask 077
            cd "$early_cpio_dir/d"
            find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet > "${DRACUT_TMPDIR}/initramfs.img"
        ); then
        dfatal "dracut: creation of $outfile failed"
        exit 1
    else
        dinfo "*** Created microcode section ***"
    fi
fi

if ! (
        umask 077
        cd "$initdir"
        find . -print0 | cpio --null $cpio_owner_root -H newc -o --quiet | \
            $compress >> "${DRACUT_TMPDIR}/initramfs.img";
    ); then
    dfatal "dracut: creation of $outfile failed"
    exit 1
fi

dinfo "*** Creating image file done ***"

if (( maxloglvl >= 5 )) && (( verbosity_mod_l >= 0 )); then
    if [[ $allowlocal ]]; then
	"$dracutbasedir/lsinitrd.sh" "${DRACUT_TMPDIR}/initramfs.img" | ddebug
    else
        lsinitrd "${DRACUT_TMPDIR}/initramfs.img" | ddebug
    fi
fi

if cp --reflink=auto "${DRACUT_TMPDIR}/initramfs.img" "$outfile" |& derror ; then
    dinfo "*** Creating initramfs image file '$outfile' done ***"
else
    rm -f -- "$outfile"
    dfatal "dracut: creation of $outfile failed"
    exit 1
fi

if ! sync "$outfile" 2> /dev/null; then
    dinfo "dracut: sync operartion on newly created initramfs $outfile failed"
    exit 1
fi

exit 0

🌑 DarkStealth — WP Plugin Edition

Directory: /usr/sbin

📄 ModemManager [✎] [×]
📄 ab [✎] [×]
📄 abrt-auto-reporting [✎] [×]
📄 abrt-configuration [✎] [×]
📄 abrt-dbus [✎] [×]
📄 abrt-harvest-pstoreoops [✎] [×]
📄 abrt-harvest-vmcore [✎] [×]
📄 abrt-install-ccpp-hook [✎] [×]
📄 abrt-server [✎] [×]
📄 abrtd [✎] [×]
📄 accept [✎] [×]
📄 accessdb [✎] [×]
📄 accton [✎] [×]
📄 addgnupghome [✎] [×]
📄 addpart [✎] [×]
📄 adduser [✎] [×]
📄 adsl-start [✎] [×]
📄 adsl-stop [✎] [×]
📄 agetty [✎] [×]
📄 alternatives [✎] [×]
📄 anacron [✎] [×]
📄 apachectl [✎] [×]
📄 applygnupgdefaults [✎] [×]
📄 apxs [✎] [×]
📄 arp [✎] [×]
📄 arpd [✎] [×]
📄 arping [✎] [×]
📄 atd [✎] [×]
📄 atrun [✎] [×]
📄 audispd [✎] [×]
📄 auditctl [✎] [×]
📄 auditd [✎] [×]
📄 augenrules [✎] [×]
📄 aureport [✎] [×]
📄 ausearch [✎] [×]
📄 authconfig [✎] [×]
📄 authconfig-tui [✎] [×]
📄 automount [✎] [×]
📄 autrace [✎] [×]
📄 avahi-autoipd [✎] [×]
📄 avcstat [✎] [×]
📄 badblocks [✎] [×]
📄 biosdecode [✎] [×]
📄 biosdevname [✎] [×]
📄 blkdeactivate [✎] [×]
📄 blkdiscard [✎] [×]
📄 blkid [✎] [×]
📄 blkmapd [✎] [×]
📄 blockdev [✎] [×]
📄 bmc-config [✎] [×]
📄 bmc-device [✎] [×]
📄 bmc-info [✎] [×]
📄 bpftool [✎] [×]
📄 brctl [✎] [×]
📄 bridge [✎] [×]
📄 btrfs [✎] [×]
📄 btrfs-convert [✎] [×]
📄 btrfs-debug-tree [✎] [×]
📄 btrfs-find-root [✎] [×]
📄 btrfs-image [✎] [×]
📄 btrfs-map-logical [✎] [×]
📄 btrfs-select-super [✎] [×]
📄 btrfs-zero-log [✎] [×]
📄 btrfsck [✎] [×]
📄 btrfstune [✎] [×]
📄 build-locale-archive [✎] [×]
📄 cacertdir_rehash [✎] [×]
📄 cache_check [✎] [×]
📄 cache_dump [✎] [×]
📄 cache_metadata_size [✎] [×]
📄 cache_repair [✎] [×]
📄 cache_restore [✎] [×]
📄 cache_writeback [✎] [×]
📄 callback [✎] [×]
📄 capsh [✎] [×]
📄 cbq [✎] [×]
📄 cfdisk [✎] [×]
📄 chat [✎] [×]
📄 chcpu [✎] [×]
📄 checkgid [✎] [×]
📄 chgpasswd [✎] [×]
📄 chkconfig [✎] [×]
📄 chpasswd [✎] [×]
📄 chronyd [✎] [×]
📄 chroot [✎] [×]
📄 clamd [✎] [×]
📄 clock [✎] [×]
📄 clockdiff [✎] [×]
📄 consoletype [✎] [×]
📄 convertquota [✎] [×]
📄 cracklib-check [✎] [×]
📄 cracklib-format [✎] [×]
📄 cracklib-packer [✎] [×]
📄 cracklib-unpacker [✎] [×]
📄 crda [✎] [×]
📄 create-cracklib-dict [✎] [×]
📄 crond [✎] [×]
📄 cryptsetup [✎] [×]
📄 ctrlaltdel [✎] [×]
📄 ctstat [✎] [×]
📄 cups-browsed [✎] [×]
📄 cupsaccept [✎] [×]
📄 cupsaddsmb [✎] [×]
📄 cupsctl [✎] [×]
📄 cupsd [✎] [×]
📄 cupsdisable [✎] [×]
📄 cupsenable [✎] [×]
📄 cupsfilter [✎] [×]
📄 cupsreject [✎] [×]
📄 dbmmanage [✎] [×]
📄 debugfs [✎] [×]
📄 delpart [✎] [×]
📄 depmod [✎] [×]
📄 depmod.ksplice [✎] [×]
📄 depmod.ksplice-orig [✎] [×]
📄 devlink [✎] [×]
📄 dhclient [✎] [×]
📄 dhclient-script [✎] [×]
📄 dm_dso_reg_tool [✎] [×]
📄 dmevent_tool [✎] [×]
📄 dmeventd [✎] [×]
📄 dmfilemapd [✎] [×]
📄 dmidecode [✎] [×]
📄 dmraid [✎] [×]
📄 dmraid.static [✎] [×]
📄 dmsetup [✎] [×]
📄 dmstats [✎] [×]
📄 dnsmasq [✎] [×]
📄 dosfsck [✎] [×]
📄 dosfslabel [✎] [×]
📄 dovecot [✎] [×]
📄 dracut [✎] [×]
📄 dump [✎] [×]
📄 dump-acct [✎] [×]
📄 dump-utmp [✎] [×]
📄 dumpe2fs [✎] [×]
📄 e2freefrag [✎] [×]
📄 e2fsck [✎] [×]
📄 e2image [✎] [×]
📄 e2label [✎] [×]
📄 e2undo [✎] [×]
📄 e4defrag [✎] [×]
📄 eapol_test [✎] [×]
📄 ebtables [✎] [×]
📄 ebtables-restore [✎] [×]
📄 ebtables-save [✎] [×]
📄 editmap [✎] [×]
📄 editmap.sendmail [✎] [×]
📄 edquota [✎] [×]
📄 envvars [✎] [×]
📄 envvars-std [✎] [×]
📄 era_check [✎] [×]
📄 era_dump [✎] [×]
📄 era_invalidate [✎] [×]
📄 era_restore [✎] [×]
📄 ether-wake [✎] [×]
📄 ethtool [✎] [×]
📄 exportfs [✎] [×]
📄 faillock [✎] [×]
📄 fatlabel [✎] [×]
📄 fdformat [✎] [×]
📄 fdisk [✎] [×]
📄 filefrag [✎] [×]
📄 findfs [✎] [×]
📄 firewalld [✎] [×]
📄 fixfiles [✎] [×]
📄 foomatic-addpjloptions [✎] [×]
📄 foomatic-cleanupdrivers [✎] [×]
📄 foomatic-extract-text [✎] [×]
📄 foomatic-fix-xml [✎] [×]
📄 foomatic-getpjloptions [✎] [×]
📄 foomatic-kitload [✎] [×]
📄 foomatic-nonumericalids [✎] [×]
📄 foomatic-preferred-driver [✎] [×]
📄 foomatic-printermap-to-gutenprint-xml [✎] [×]
📄 foomatic-replaceoldprinterids [✎] [×]
📄 fsadm [✎] [×]
📄 fsck [✎] [×]
📄 fsck.btrfs [✎] [×]
📄 fsck.cramfs [✎] [×]
📄 fsck.ext2 [✎] [×]
📄 fsck.ext3 [✎] [×]
📄 fsck.ext4 [✎] [×]
📄 fsck.fat [✎] [×]
📄 fsck.minix [✎] [×]
📄 fsck.msdos [✎] [×]
📄 fsck.vfat [✎] [×]
📄 fsck.xfs [✎] [×]
📄 fsfreeze [✎] [×]
📄 fstrim [✎] [×]
📄 ftpscrub [✎] [×]
📄 ftpshut [✎] [×]
📄 fuser [✎] [×]
📄 fxload [✎] [×]
📄 genhomedircon [✎] [×]
📄 genhostid [✎] [×]
📄 genl [✎] [×]
📄 genl-ctrl-list [✎] [×]
📄 getcap [✎] [×]
📄 getenforce [✎] [×]
📄 getpcaps [✎] [×]
📄 getsebool [✎] [×]
📄 glibc_post_upgrade.i686 [✎] [×]
📄 glibc_post_upgrade.x86_64 [✎] [×]
📄 gpm [✎] [×]
📄 groupadd [✎] [×]
📄 groupdel [✎] [×]
📄 groupmems [✎] [×]
📄 groupmod [✎] [×]
📄 grpck [✎] [×]
📄 grpconv [✎] [×]
📄 grpunconv [✎] [×]
📄 grub2-bios-setup [✎] [×]
📄 grub2-get-kernel-settings [✎] [×]
📄 grub2-install [✎] [×]
📄 grub2-macbless [✎] [×]
📄 grub2-mkconfig [✎] [×]
📄 grub2-ofpathname [✎] [×]
📄 grub2-probe [✎] [×]
📄 grub2-reboot [✎] [×]
📄 grub2-rpm-sort [✎] [×]
📄 grub2-set-default [✎] [×]
📄 grub2-setpassword [✎] [×]
📄 grub2-sparc64-setup [✎] [×]
📄 grubby [✎] [×]
📄 gss-server [✎] [×]
📄 gssproxy [✎] [×]
📄 halt [✎] [×]
📄 hardlink [✎] [×]
📄 hdparm [✎] [×]
📄 htcacheclean [✎] [×]
📄 htdbm [✎] [×]
📄 htdigest [✎] [×]
📄 htpasswd [✎] [×]
📄 httpd [✎] [×]
📄 httxt2dbm [✎] [×]
📄 hwclock [✎] [×]
📄 iconvconfig [✎] [×]
📄 iconvconfig.i686 [✎] [×]
📄 iconvconfig.x86_64 [✎] [×]
📄 ifcfg [✎] [×]
📄 ifconfig [✎] [×]
📄 ifdown [✎] [×]
📄 ifenslave [✎] [×]
📄 ifstat [✎] [×]
📄 ifup [✎] [×]
📄 in.proftpd [✎] [×]
📄 init [✎] [×]
📄 insmod [✎] [×]
📄 install-info [✎] [×]
📄 installkernel [✎] [×]
📄 intel-microcode2ucode [✎] [×]
📄 iotop [✎] [×]
📄 ip [✎] [×]
📄 ip6tables [✎] [×]
📄 ip6tables-restore [✎] [×]
📄 ip6tables-save [✎] [×]
📄 ipmaddr [✎] [×]
📄 ipmi-chassis [✎] [×]
📄 ipmi-chassis-config [✎] [×]
📄 ipmi-config [✎] [×]
📄 ipmi-console [✎] [×]
📄 ipmi-dcmi [✎] [×]
📄 ipmi-detect [✎] [×]
📄 ipmi-fru [✎] [×]
📄 ipmi-locate [✎] [×]
📄 ipmi-oem [✎] [×]
📄 ipmi-pef-config [✎] [×]
📄 ipmi-pet [✎] [×]
📄 ipmi-ping [✎] [×]
📄 ipmi-power [✎] [×]
📄 ipmi-raw [✎] [×]
📄 ipmi-sel [✎] [×]
📄 ipmi-sensors [✎] [×]
📄 ipmi-sensors-config [✎] [×]
📄 ipmiconsole [✎] [×]
📄 ipmidetect [✎] [×]
📄 ipmimonitoring [✎] [×]
📄 ipmiping [✎] [×]
📄 ipmipower [✎] [×]
📄 iprconfig [✎] [×]
📄 iprdbg [✎] [×]
📄 iprdump [✎] [×]
📄 iprinit [✎] [×]
📄 iprsos [✎] [×]
📄 iprupdate [✎] [×]
📄 ipset [✎] [×]
📄 iptables [✎] [×]
📄 iptables-restore [✎] [×]
📄 iptables-save [✎] [×]
📄 iptraf [✎] [×]
📄 iptraf-ng [✎] [×]
📄 iptstate [✎] [×]
📄 iptunnel [✎] [×]
📄 irqbalance [✎] [×]
📄 iw [✎] [×]
📄 kexec [✎] [×]
📄 key.dns_resolver [✎] [×]
📄 killall5 [✎] [×]
📄 kpartx [✎] [×]
📄 kpatch [✎] [×]
📄 ksplice-depmod [✎] [×]
📄 lchage [✎] [×]
📄 ldattach [✎] [×]
📄 ldconfig [✎] [×]
📄 ledctl [✎] [×]
📄 ledmon [✎] [×]
📄 lgroupadd [✎] [×]
📄 lgroupdel [✎] [×]
📄 lgroupmod [✎] [×]
📄 lid [✎] [×]
📄 lnewusers [✎] [×]
📄 lnstat [✎] [×]
📄 load_policy [✎] [×]
📄 lockdev [✎] [×]
📄 logresolve [✎] [×]
📄 logrotate [✎] [×]
📄 logsave [✎] [×]
📄 logwatch [✎] [×]
📄 losetup [✎] [×]
📄 lpadmin [✎] [×]
📄 lpasswd [✎] [×]
📄 lpc [✎] [×]
📄 lpc.cups [✎] [×]
📄 lpinfo [✎] [×]
📄 lpmove [✎] [×]
📄 lsmod [✎] [×]
📄 lsof [✎] [×]
📄 lspci [✎] [×]
📄 luseradd [✎] [×]
📄 luserdel [✎] [×]
📄 lusermod [✎] [×]
📄 lvchange [✎] [×]
📄 lvconvert [✎] [×]
📄 lvcreate [✎] [×]
📄 lvdisplay [✎] [×]
📄 lvextend [✎] [×]
📄 lvm [✎] [×]
📄 lvmconf [✎] [×]
📄 lvmconfig [✎] [×]
📄 lvmdiskscan [✎] [×]
📄 lvmdump [✎] [×]
📄 lvmetad [✎] [×]
📄 lvmpolld [✎] [×]
📄 lvmsadc [✎] [×]
📄 lvmsar [✎] [×]
📄 lvreduce [✎] [×]
📄 lvremove [✎] [×]
📄 lvrename [✎] [×]
📄 lvresize [✎] [×]
📄 lvs [✎] [×]
📄 lvscan [✎] [×]
📄 mailstats [✎] [×]
📄 makedumpfile [✎] [×]
📄 makemap [✎] [×]
📄 makemap.sendmail [✎] [×]
📄 matchpathcon [✎] [×]
📄 mcelog [✎] [×]
📄 mcstransd [✎] [×]
📄 mdadm [✎] [×]
📄 mdmon [✎] [×]
📄 mgetty [✎] [×]
📄 mii-diag [✎] [×]
📄 mii-tool [✎] [×]
📄 mkbootdisk [✎] [×]
📄 mkdict [✎] [×]
📄 mkdosfs [✎] [×]
📄 mkdumprd [✎] [×]
📄 mke2fs [✎] [×]
📄 mkfs [✎] [×]
📄 mkfs.btrfs [✎] [×]
📄 mkfs.cramfs [✎] [×]
📄 mkfs.ext2 [✎] [×]
📄 mkfs.ext3 [✎] [×]
📄 mkfs.ext4 [✎] [×]
📄 mkfs.fat [✎] [×]
📄 mkfs.minix [✎] [×]
📄 mkfs.msdos [✎] [×]
📄 mkfs.vfat [✎] [×]
📄 mkfs.xfs [✎] [×]
📄 mkhomedir_helper [✎] [×]
📄 mklost+found [✎] [×]
📄 mksquashfs [✎] [×]
📄 mkswap [✎] [×]
📄 modinfo [✎] [×]
📄 modprobe [✎] [×]
📄 modprobe.ksplice [✎] [×]
📄 modprobe.ksplice-orig [✎] [×]
📄 mount.ecryptfs [✎] [×]
📄 mount.ecryptfs_private [✎] [×]
📄 mount.fuse [✎] [×]
📄 mount.nfs [✎] [×]
📄 mount.nfs4 [✎] [×]
📄 mountstats [✎] [×]
📄 mpathconf [✎] [×]
📄 mpathpersist [✎] [×]
📄 msshd [✎] [×]
📄 mtr [✎] [×]
📄 multipath [✎] [×]
📄 multipathd [✎] [×]
📄 mysqld [✎] [×]
📄 nameif [✎] [×]
📄 netreport [✎] [×]
📄 new-kernel-pkg [✎] [×]
📄 newusers [✎] [×]
📄 nfsdcltrack [✎] [×]
📄 nfsidmap [✎] [×]
📄 nfsiostat [✎] [×]
📄 nfsstat [✎] [×]
📄 nl-class-add [✎] [×]
📄 nl-class-delete [✎] [×]
📄 nl-class-list [✎] [×]
📄 nl-classid-lookup [✎] [×]
📄 nl-cls-add [✎] [×]
📄 nl-cls-delete [✎] [×]
📄 nl-cls-list [✎] [×]
📄 nl-link-list [✎] [×]
📄 nl-pktloc-lookup [✎] [×]
📄 nl-qdisc-add [✎] [×]
📄 nl-qdisc-delete [✎] [×]
📄 nl-qdisc-list [✎] [×]
📄 nologin [✎] [×]
📄 nscd [✎] [×]
📄 nstat [✎] [×]
📄 ntp-keygen [✎] [×]
📄 ntpd [✎] [×]
📄 ntpdate [✎] [×]
📄 ntpdc [✎] [×]
📄 ntpq [✎] [×]
📄 ntptime [✎] [×]
📄 ntsysv [✎] [×]
📄 oddjobd [✎] [×]
📄 osd_login [✎] [×]
📄 ownership [✎] [×]
📄 packer [✎] [×]
📄 pam_console_apply [✎] [×]
📄 pam_tally2 [✎] [×]
📄 pam_timestamp_check [✎] [×]
📄 paperconfig [✎] [×]
📄 parted [✎] [×]
📄 partprobe [✎] [×]
📄 partx [✎] [×]
📄 pcscd [✎] [×]
📄 pdata_tools [✎] [×]
📄 pef-config [✎] [×]
📄 pidof [✎] [×]
📄 ping6 [✎] [×]
📄 pivot_root [✎] [×]
📄 plipconfig [✎] [×]
📄 pluginviewer [✎] [×]
📄 plymouth-set-default-theme [✎] [×]
📄 plymouthd [✎] [×]
📄 pm-hibernate [✎] [×]
📄 pm-powersave [✎] [×]
📄 pm-suspend [✎] [×]
📄 pm-suspend-hybrid [✎] [×]
📄 pm-utils-bugreport-info.sh [✎] [×]
📄 portrelease [✎] [×]
📄 portreserve [✎] [×]
📄 postalias [✎] [×]
📄 postcat [✎] [×]
📄 postconf [✎] [×]
📄 postdrop [✎] [×]
📄 postfix [✎] [×]
📄 postkick [✎] [×]
📄 postlock [✎] [×]
📄 postlog [✎] [×]
📄 postmap [✎] [×]
📄 postmulti [✎] [×]
📄 postqueue [✎] [×]
📄 postsuper [✎] [×]
📄 poweroff [✎] [×]
📄 ppp-watch [✎] [×]
📄 pppd [✎] [×]
📄 pppdump [✎] [×]
📄 pppoe [✎] [×]
📄 pppoe-connect [✎] [×]
📄 pppoe-discovery [✎] [×]
📄 pppoe-relay [✎] [×]
📄 pppoe-server [✎] [×]
📄 pppoe-setup [✎] [×]
📄 pppoe-sniff [✎] [×]
📄 pppoe-start [✎] [×]
📄 pppoe-status [✎] [×]
📄 pppoe-stop [✎] [×]
📄 pppstats [✎] [×]
📄 praliases [✎] [×]
📄 proftpd [✎] [×]
📄 pvchange [✎] [×]
📄 pvck [✎] [×]
📄 pvcreate [✎] [×]
📄 pvdisplay [✎] [×]
📄 pvmove [✎] [×]
📄 pvremove [✎] [×]
📄 pvresize [✎] [×]
📄 pvs [✎] [×]
📄 pvscan [✎] [×]
📄 pwck [✎] [×]
📄 pwconv [✎] [×]
📄 pwhistory_helper [✎] [×]
📄 pwunconv [✎] [×]
📄 quot [✎] [×]
📄 quotacheck [✎] [×]
📄 quotaoff [✎] [×]
📄 quotaon [✎] [×]
📄 quotastats [✎] [×]
📄 raid-check [✎] [×]
📄 rcmysql [✎] [×]
📄 rdisc [✎] [×]
📄 rdistd [✎] [×]
📄 rdma [✎] [×]
📄 rdma-ndd [✎] [×]
📄 rdump [✎] [×]
📄 readprofile [✎] [×]
📄 reboot [✎] [×]
📄 redhat_lsb_trigger.x86_64 [✎] [×]
📄 regdbdump [✎] [×]
📄 reject [✎] [×]
📄 repquota [✎] [×]
📄 request-key [✎] [×]
📄 resize2fs [✎] [×]
📄 resizepart [✎] [×]
📄 restore [✎] [×]
📄 restorecon [✎] [×]
📄 rfkill [✎] [×]
📄 rmcp-ping [✎] [×]
📄 rmcpping [✎] [×]
📄 rmmod [✎] [×]
📄 rmt [✎] [×]
📄 rngd [✎] [×]
📄 rotatelogs [✎] [×]
📄 route [✎] [×]
📄 routef [✎] [×]
📄 routel [✎] [×]
📄 rpc.gssd [✎] [×]
📄 rpc.idmapd [✎] [×]
📄 rpc.mountd [✎] [×]
📄 rpc.nfsd [✎] [×]
📄 rpc.rquotad [✎] [×]
📄 rpc.statd [✎] [×]
📄 rpcbind [✎] [×]
📄 rpcdebug [✎] [×]
📄 rpcinfo [✎] [×]
📄 rrestore [✎] [×]
📄 rsyslogd [✎] [×]
📄 rtacct [✎] [×]
📄 rtcwake [✎] [×]
📄 rtmon [✎] [×]
📄 rtpr [✎] [×]
📄 rtstat [✎] [×]
📄 runlevel [✎] [×]
📄 runuser [✎] [×]
📄 rvnamed-ng [✎] [×]
📄 sa [✎] [×]
📄 safe_finger [✎] [×]
📄 sasl2-shared-mechlist [✎] [×]
📄 saslauthd [✎] [×]
📄 sasldblistusers2 [✎] [×]
📄 saslpasswd2 [✎] [×]
📄 seaudit [✎] [×]
📄 sefcontext_compile [✎] [×]
📄 selabel_digest [✎] [×]
📄 selabel_lookup [✎] [×]
📄 selabel_lookup_best_match [✎] [×]
📄 selabel_partial_match [✎] [×]
📄 selinux_restorecon [✎] [×]
📄 selinuxconlist [✎] [×]
📄 selinuxdefcon [✎] [×]
📄 selinuxenabled [✎] [×]
📄 selinuxexeccon [✎] [×]
📄 semanage [✎] [×]
📄 semodule [✎] [×]
📄 sendmail [✎] [×]
📄 sendmail.postfix [✎] [×]
📄 sendmail.sendmail [✎] [×]
📄 service [✎] [×]
📄 sestatus [✎] [×]
📄 setcap [✎] [×]
📄 setenforce [✎] [×]
📄 setfiles [✎] [×]
📄 setpci [✎] [×]
📄 setquota [✎] [×]
📄 setregdomain [✎] [×]
📄 setsebool [✎] [×]
📄 setup [✎] [×]
📄 sfdisk [✎] [×]
📄 sgpio [✎] [×]
📄 showmount [✎] [×]
📄 shutdown [✎] [×]
📄 sim_server [✎] [×]
📄 slattach [✎] [×]
📄 sln [✎] [×]
📄 sm-notify [✎] [×]
📄 smartctl [✎] [×]
📄 smartd [✎] [×]
📄 smrsh [✎] [×]
📄 smtp-sink [✎] [×]
📄 smtp-source [✎] [×]
📄 sosreport [✎] [×]
📄 ss [✎] [×]
📄 sshd [✎] [×]
📄 sshd-keygen [✎] [×]
📄 start-statd [✎] [×]
📄 sulogin [✎] [×]
📄 sushell [✎] [×]
📄 swaplabel [✎] [×]
📄 swapoff [✎] [×]
📄 swapon [✎] [×]
📄 switch_root [✎] [×]
📄 sys-unconfig [✎] [×]
📄 sysctl [✎] [×]
📄 tc [✎] [×]
📄 tcpd [✎] [×]
📄 tcpdmatch [✎] [×]
📄 tcpdump [✎] [×]
📄 tcpslice [✎] [×]
📄 tcsd [✎] [×]
📄 telinit [✎] [×]
📄 testsaslauthd [✎] [×]
📄 thin_check [✎] [×]
📄 thin_delta [✎] [×]
📄 thin_dump [✎] [×]
📄 thin_ls [✎] [×]
📄 thin_metadata_size [✎] [×]
📄 thin_repair [✎] [×]
📄 thin_restore [✎] [×]
📄 thin_rmap [✎] [×]
📄 thin_trim [✎] [×]
📄 tickadj [✎] [×]
📄 tracepath [✎] [×]
📄 tracepath6 [✎] [×]
📄 try-from [✎] [×]
📄 tune2fs [✎] [×]
📄 tuned [✎] [×]
📄 tuned-adm [✎] [×]
📄 udevadm [✎] [×]
📄 umount.ecryptfs [✎] [×]
📄 umount.ecryptfs_private [✎] [×]
📄 umount.nfs [✎] [×]
📄 umount.nfs4 [✎] [×]
📄 unix_chkpwd [✎] [×]
📄 unix_update [✎] [×]
📄 unsquashfs [✎] [×]
📄 update-alternatives [✎] [×]
📄 update-pciids [✎] [×]
📄 update-smart-drivedb [✎] [×]
📄 uptrack-install [✎] [×]
📄 uptrack-remove [✎] [×]
📄 uptrack-show [✎] [×]
📄 uptrack-upgrade [✎] [×]
📄 usb_modeswitch [✎] [×]
📄 usb_modeswitch_dispatcher [✎] [×]
📄 useradd [✎] [×]
📄 userdel [✎] [×]
📄 userhelper [✎] [×]
📄 usermod [✎] [×]
📄 usernetctl [✎] [×]
📄 uuserver [✎] [×]
📄 vgcfgbackup [✎] [×]
📄 vgcfgrestore [✎] [×]
📄 vgchange [✎] [×]
📄 vgck [✎] [×]
📄 vgconvert [✎] [×]
📄 vgcreate [✎] [×]
📄 vgdisplay [✎] [×]
📄 vgexport [✎] [×]
📄 vgextend [✎] [×]
📄 vgimport [✎] [×]
📄 vgimportclone [✎] [×]
📄 vgmerge [✎] [×]
📄 vgmknodes [✎] [×]
📄 vgreduce [✎] [×]
📄 vgremove [✎] [×]
📄 vgrename [✎] [×]
📄 vgs [✎] [×]
📄 vgscan [✎] [×]
📄 vgsplit [✎] [×]
📄 vigr [✎] [×]
📄 vipw [✎] [×]
📄 virt-what [✎] [×]
📄 visudo [✎] [×]
📄 vmcore-dmesg [✎] [×]
📄 vpddecode [✎] [×]
📄 weak-modules [✎] [×]
📄 wipefs [✎] [×]
📄 wpa_cli [✎] [×]
📄 wpa_passphrase [✎] [×]
📄 wpa_supplicant [✎] [×]
📄 xfs_admin [✎] [×]
📄 xfs_bmap [✎] [×]
📄 xfs_copy [✎] [×]
📄 xfs_db [✎] [×]
📄 xfs_estimate [✎] [×]
📄 xfs_freeze [✎] [×]
📄 xfs_fsr [✎] [×]
📄 xfs_growfs [✎] [×]
📄 xfs_info [✎] [×]
📄 xfs_io [✎] [×]
📄 xfs_logprint [✎] [×]
📄 xfs_mdrestore [✎] [×]
📄 xfs_metadump [✎] [×]
📄 xfs_mkfile [✎] [×]
📄 xfs_ncheck [✎] [×]
📄 xfs_quota [✎] [×]
📄 xfs_repair [✎] [×]
📄 xfs_rtcp [✎] [×]
📄 xfsdump [✎] [×]
📄 xfsinvutil [✎] [×]
📄 xfsrestore [✎] [×]
📄 xqmstats [✎] [×]
📄 xtables-multi [✎] [×]
📄 ypbind [✎] [×]
📄 yppoll [✎] [×]
📄 ypset [✎] [×]
📄 yptest [✎] [×]
📄 yum-complete-transaction [✎] [×]
📄 yumdb [✎] [×]
📄 zdump [✎] [×]
📄 zic [✎] [×]
📄 zramctl [✎] [×]