✏️ Editing: pppoe-setup

#! /bin/bash
#***********************************************************************
#
# pppoe-setup
#
# All-purpose slicing/dicing shell script to configure rp-pppoe.
#
# Copyright (C) 2000 Roaring Penguin Software Inc.
#
# $Id$
#***********************************************************************

# Paths to programs and config files
IP=/sbin/ip
PPPD=/usr/sbin/pppd
PPPOE=/sbin/pppoe
ECHO=/bin/echo
LS=/bin/ls
ID=/usr/bin/id
NETWORKDIR=/etc/sysconfig/network-scripts
PAPFILE=/etc/ppp/chap-secrets
CHAPFILE=/etc/ppp/pap-secrets
RESOLVFILE=/etc/resolv.conf

# Set to "C" locale so we can parse messages from commands
LANG=C
export LANG

# Protect created files
umask 077

copy() {
    cp $1 $2
    if [ "$?" != 0 ] ; then
	$ECHO "*** Error copying $1 to $2"
	$ECHO "*** Quitting."
	exit 1
    fi
}

get_device() {
    if [ ! -d $NETWORKDIR ] ; then
        $ECHO "** $NETWORKDIR not found"
        $ECHO "** Quitting"
        exit 1
    fi

cd $NETWORKDIR
    interfaces=$($LS ifcfg-ppp* 2>/dev/null | egrep -v '(~|\.bak)$' | \
                 egrep -v '(rpmsave|rpmorig|rpmnew)' | sed 's/^ifcfg-//g')

for i in $interfaces ; do
        test -f ifcfg-$i && . ifcfg-$i 2>/dev/null
        if [ "$TYPE" = "xDSL" ] ; then
            device_count=$[$device_count+1]
            devices="$devices $DEVICE"
        fi
    done
}

clear_env() {
    unset USERCTL BOOTPROTO NAME DEVICE TYPE ONBOOT FIREWALL PING \
          PPPOE_TIMEOUT LCP_FAILURE LCP_INTERVAL CLAMPMSS CONNECT_POLL \
	  CONNECT_TIMEOUT DEFROUTE SYNCHRONOUS ETH PROVIDER USER PEERDNS \
	  DNS1 DNS2
}

clear

$ECHO "Welcome to the PPPoE client setup.  First, I will run some checks on"
$ECHO "your system to make sure the PPPoE client is installed properly..."
$ECHO ""

# Must be root
if [ "`$ID -u`" != 0 ] ; then
    $ECHO "$0: Sorry, you must be root to run this script"
    exit 1
fi

# Must have pppd
if [ ! -x $PPPD ] ; then
    $ECHO "Oops, I can't execute the program '$PPPD'.  You"
    $ECHO "must install the PPP software suite, version 2.3.10 or later."
    exit 1
fi

# get the DSL config files in /etc/sysconfig/network-scripts
devices=""
device_count=0
get_device

if [ $device_count -gt 0 ] ; then
    $ECHO "The following DSL config was found on your system:"
    $ECHO ""
    $ECHO "  Device:      Name:"

for i in $devices ; do
	. $NETWORKDIR/ifcfg-$i
	$ECHO "  $i         $NAME"
    done

$ECHO ""

for i in $devices ; do
	default_device=$i
	break
    done

clear_env

while [ true ] ; do
	$ECHO "Please enter the device if you want to configure the present DSL config"
	$ECHO -n "(default $default_device) or enter 'n' if you want to create a new one: "

read dev

if [ "$dev" = "n" ] ; then
	    i=0
	    while true; do
		found=0
		for j in $interfaces ; do
		    if [ "$j" = "ppp$i" ] ; then
			found=1
			break
		    fi
		done
		if [ $found -eq 0 ] ; then
		    dsl_device="ppp$i"
		    break
		fi
		i=$[$i+1]
	    done
            if [ -z "$dsl_device" ]; then
                dev=0
                while [ -e $NETWORKDIR/ifcfg-ppp$dev ]; do
                    dev=`expr $dev + 1`
                done
                dsl_device="ppp$dev"
            fi
	    break
	else
	    if [ -n "$default_device" ] ; then
		if [ -n "$dev" ] ; then
		    dsl_device="$dev"
		else
		    dsl_device="$default_device"
		fi
	    fi
	    for i in $devices ; do
		[ "$dsl_device" = "$i" ] && break
	    done
	    if [ "$dsl_device" = "$i" ] ; then
		break
	    fi
	    $ECHO "Device '$dsl_device' is not found in the list, please choose the correct one"
	fi
    done
else
    dev=0
    while [ -e $NETWORKDIR/ifcfg-ppp$dev ]; do
        dev=`expr $dev + 1`
    done
    dsl_device="ppp$dev"
fi

CONFIG="$NETWORKDIR/ifcfg-$dsl_device"
DEVICE=$dsl_device
export CONFIG

[ "$dev" = "n" ] || . $CONFIG 2>/dev/null
[ "$DEMAND" = "" ] &&  DEMAND=no

while [ true ] ; do
    $ECHO ""
    $ECHO "LOGIN NAME"
    $ECHO ""
    if [ -z "$USER" ] ; then
	$ECHO -n "Enter your Login Name: "
    else
	$ECHO -n "Enter your Login Name (default $USER): "
    fi

read U

if [ -z "$U" ] ; then
	if [ -z "$USER" ] ; then
	    continue
	fi
    else
	USER="$U"
    fi

# Under Linux, "fix" the default interface if eth1 is not available
    [ -n "$ETH" ] || ETH=eth0
    if test `uname -s` = "Linux" ; then
       $IP link show $ETH > /dev/null 2>&1 || ETH=eth0
    fi
    $ECHO ""
    $ECHO "INTERFACE"
    $ECHO ""
    $ECHO "Enter the Ethernet interface connected to the PPPoE modem"
    $ECHO "For Solaris, this is likely to be something like /dev/hme0."
    $ECHO "For Linux, it will be ethX, where 'X' is a number."
    $ECHO -n "(default $ETH): "
    read E

if [ -n "$E" ] ; then
	ETH="$E"
    fi

$ECHO ""
    $ECHO "Do you want the link to come up on demand, or stay up continuously?"
    $ECHO "If you want it to come up on demand, enter the idle time in seconds"
    $ECHO "after which the link should be dropped.  If you want the link to"
    $ECHO "stay up permanently, enter 'no' (two letters, lower-case.)"
    $ECHO "NOTE: Demand-activated links do not interact well with dynamic IP"
    $ECHO "addresses.  You may have some problems with demand-activated links."
    $ECHO -n "Enter the demand value (default $DEMAND): "
    read D
    if [ -n "$D" ] ; then
	DEMAND="$D"
    fi

$ECHO ""
    $ECHO "DNS"
    $ECHO ""
    $ECHO "Please enter the IP address of your ISP's primary DNS server."
    $ECHO "If your ISP claims that 'the server will provide dynamic DNS addresses',"
    $ECHO "enter 'server' (all lower-case) here."
    $ECHO "If you just press enter, I will assume you know what you are"
    $ECHO "doing and not modify your DNS setup."
    $ECHO -n "Enter the DNS information here: "

read DNS1

if [ -n "$DNS1" ] ; then
        if [ "$DNS1" != "server" ] ; then
	    $ECHO "Please enter the IP address of your ISP's secondary DNS server."
	    $ECHO "If you just press enter, I will assume there is only one DNS server."
	    $ECHO -n "Enter the secondary DNS server address here: "
	    read DNS2
	fi
    fi

while [ true ] ; do
	$ECHO ""
	$ECHO "PASSWORD"
	$ECHO ""
	stty -echo
	$ECHO -n "Please enter your Password: "
	read PWD1
	$ECHO ""
	$ECHO -n "Please re-enter your Password: "
	read PWD2
	$ECHO ""
	stty echo
	if [ "$PWD1" = "$PWD2" ] ; then
	    break
	fi

$ECHO -n "Sorry, the passwords do not match.  Try again? (y/n)"
	read ANS
	case "$ANS" in
	    N|No|NO|Non|n|no|non)
		$ECHO "OK, quitting.  Bye."
		exit 1
	esac
    done

# Usercontrol
    $ECHO ""
    $ECHO "USERCTRL"
    $ECHO
    $ECHO "Please enter 'yes' (three letters, lower-case.) if you want to allow"
    $ECHO -n "normal user to start or stop DSL connection (default yes): "

read USERCTL

if [ -z "$USERCTL" ] ; then
	USERCTL="yes"
    fi

# Firewalling
    $ECHO ""
    $ECHO "FIREWALLING"
    $ECHO ""
    if test `uname -s` != "Linux" ; then
	$ECHO "Sorry, firewalling is only supported under Linux.  Consult"
	$ECHO "your operating system manuals for details on setting up"
	$ECHO "packet filters for your system."
	FIREWALL=NONE
    else
	$ECHO "Please choose the firewall rules to use.  Note that these rules are"
	$ECHO "very basic.  You are strongly encouraged to use a more sophisticated"
	$ECHO "firewall setup; however, these will provide basic security.  If you"
	$ECHO "are running any servers on your machine, you must choose 'NONE' and"
	$ECHO "set up firewalling yourself.  Otherwise, the firewall rules will deny"
	$ECHO "access to all standard servers like Web, e-mail, ftp, etc.  If you"
	$ECHO "are using SSH, the rules will block outgoing SSH connections which"
	$ECHO "allocate a privileged source port."
	$ECHO ""
	while [ true ] ; do
	    $ECHO "The firewall choices are:"
	    $ECHO "0 - NONE: This script will not set any firewall rules.  You are responsible"
	    $ECHO "          for ensuring the security of your machine.  You are STRONGLY"
	    $ECHO "          recommended to use some kind of firewall rules."
	    $ECHO "1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation"
	    $ECHO "2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway"
	    $ECHO "                for a LAN"
	    $ECHO -n "Choose a type of firewall (0-2): "
	    read a
	    if [ "$a" = 0 -o "$a" = 1 -o "$a" = 2 ] ; then
		break
	    fi
	    $ECHO "Please enter a number from 0 to 2"
	done

case "$a" in
	    0)
		FIREWALL=NONE
		;;
	    1)
		FIREWALL=STANDALONE
		;;
	    2)
		FIREWALL=MASQUERADE
		;;
	esac
    fi

$ECHO ""
    $ECHO "Start this connection at boot time"
    $ECHO ""
    $ECHO "Do you want to start this connection at boot time?"
    $ECHO -n "Please enter no or yes (default no):"
    read boot
    case "$boot" in
      yes|YES) ONBOOT="yes";;
      *) ONBOOT="no";;
    esac

$ECHO ""
    $ECHO "** Summary of what you entered **"
    $ECHO ""
    $ECHO "Ethernet Interface: $ETH"
    $ECHO "User name:          $USER"
    if [ "$DEMAND" = "no" ] ; then
	$ECHO "Activate-on-demand: No"
    else
	$ECHO "Activate-on-demand: Yes; idle timeout = $DEMAND seconds"
    fi

if [ -n "$DNS1" ] ; then
        if [ "$DNS1" = "server" ] ; then
	    $ECHO "DNS addresses:      Supplied by ISP's server"
        else
	    $ECHO "Primary DNS:        $DNS1"
	    if [ -n "$DNS2" ] ; then
		$ECHO "Secondary DNS:      $DNS2"
	    fi
        fi
    else
	$ECHO "DNS:                Do not adjust"
    fi
    $ECHO "Firewalling:        $FIREWALL"
    $ECHO "User Control:       $USERCTL"
    while [ true ] ; do
        $ECHO -n 'Accept these settings and adjust configuration files (y/n)? '
        read ANS
	case "ANS" in
	    Y|y|yes|Yes|oui|Oui)
		ANS=y
		;;
            N|n|no|No|non|Non)
		ANS=n
		;;
	esac
	if [ "$ANS" = "y" -o "$ANS" = "n" ] ; then
	    break
        fi
    done
    if [ "$ANS" = "y" ] ; then
	break
    fi
done

# Adjust configuration files.  First to $CONFIG

$ECHO "Adjusting $CONFIG"

test -f $CONFIG && copy $CONFIG $CONFIG.bak
if [ "$DNS1" = "server" ] ; then
    DNS1=""
    DNS2=""
    PEERDNS=yes
else
    PEERDNS=no
fi

# Where is pppd likely to put its pid?
if [ -d /var/run ] ; then
    VARRUN=/var/run
else
    VARRUN=/etc/ppp
fi

$ECHO "USERCTL=$USERCTL" >$CONFIG
$ECHO "BOOTPROTO=dialup" >>$CONFIG
[ -z "$NAME" ] && NAME="DSL$DEVICE"
$ECHO "NAME=DSL$DEVICE" >>$CONFIG
$ECHO "DEVICE=$DEVICE" >>$CONFIG
$ECHO "TYPE=xDSL" >>$CONFIG
$ECHO "ONBOOT=$ONBOOT" >>$CONFIG
$ECHO "PIDFILE=/var/run/pppoe-adsl.pid" >>$CONFIG
$ECHO "FIREWALL=$FIREWALL" >>$CONFIG
[ -z "$PING" ] && PING="."
$ECHO "PING=$PING" >>$CONFIG
[ -z "$PPPOE_TIMEOUT" ] && PPPOE_TIMEOUT=80
$ECHO "PPPOE_TIMEOUT=$PPPOE_TIMEOUT" >>$CONFIG
[ -z "$LCP_FAILURE" ] && LCP_FAILURE=3
$ECHO "LCP_FAILURE=$LCP_FAILURE" >>$CONFIG
[ -z "$LCP_INTERVAL" ] && LCP_INTERVAL=20
$ECHO "LCP_INTERVAL=$LCP_INTERVAL" >>$CONFIG
[ -z "$CLAMPMSS" ] && CLAMPMSS=1412
$ECHO "CLAMPMSS=$CLAMPMSS" >>$CONFIG
[ -z "$CONNECT_POLL" ] && CONNECT_POLL=6
$ECHO "CONNECT_POLL=$CONNECT_POLL" >>$CONFIG
[ -z "$CONNECT_TIMEOUT" ] && CONNECT_TIMEOUT=60
$ECHO "CONNECT_TIMEOUT=$CONNECT_TIMEOUT" >>$CONFIG
[ -z "$DEFROUTE" ] && DEFROUTE=yes
$ECHO "DEFROUTE=$DEFROUTE" >>$CONFIG
[ -z "$SYNCHRONOUS" ] && SYNCHRONOUS=no
$ECHO "SYNCHRONOUS=$SYNCHRONOUS" >>$CONFIG
$ECHO "ETH=$ETH" >> $CONFIG
[ -z "$PROVIDER" ] && PROVIDER="$NAME"
$ECHO "PROVIDER=$PROVIDER" >>$CONFIG
$ECHO "USER=$USER" >>$CONFIG
$ECHO "PEERDNS=$PEERDNS" >>$CONFIG
$ECHO "DEMAND=$DEMAND" >>$CONFIG

if [ -n "$DNS1" ] ; then
    if [ "$DNS1" != "server" ] ; then
	$ECHO "Adjusting $RESOLVFILE"
	if [ -r $RESOLVFILE ] ; then
	    grep -s "MADE-BY-RP-PPPOE" $RESOLVFILE > /dev/null 2>&1
	    if [ "$?" != 0 ] ; then
		$ECHO "  (But first backing it up to $RESOLVFILE.bak)"
		test -f $$RESOLVFILE && copy $RESOLVFILE $RESOLVFILE.bak
	    fi
	fi
	$ECHO "# MADE-BY-RP-PPPOE" > $RESOLVFILE
	$ECHO "nameserver $DNS1" >> $RESOLVFILE
	if [ -n "$DNS2" ] ; then
	    $ECHO "nameserver $DNS2" >> $RESOLVFILE
	fi
    fi
fi

$ECHO "Adjusting $PAPFILE and $CHAPFILE"
if [ -r $PAPFILE ] ; then
    $ECHO "  (But first backing it up to $PAPFILE.bak)"
    test -f $PAPFILE && copy $PAPFILE $PAPFILE.bak
else
    cp /dev/null $PAPFILE.bak
fi
if [ -r $CHAPFILE ] ; then
    $ECHO "  (But first backing it up to $CHAPFILE.bak)"
    test -f $CHAPFILE && copy $CHAPFILE $CHAPFILE.bak
else
    cp /dev/null $CHAPFILE.bak
fi

egrep -v "^$USER|^\"$USER\"" $PAPFILE.bak > $PAPFILE
$ECHO "\"$USER\"	*	\"$PWD1\"" >> $PAPFILE
egrep -v "^$USER|^\"$USER\"" $CHAPFILE.bak > $CHAPFILE
$ECHO "\"$USER\"	*	\"$PWD1\"" >> $CHAPFILE

$ECHO ""
$ECHO ""
$ECHO ""
$ECHO "Congratulations, it should be all set up!"
$ECHO ""
$ECHO "Type '/sbin/ifup $dsl_device' to bring up your xDSL link and '/sbin/ifdown $dsl_device'"
$ECHO "to bring it down."
$ECHO "Type '/sbin/pppoe-status $NETWORKDIR/ifcfg-$dsl_device'"
$ECHO "to see the link status."
$ECHO ""

exit 0

🌑 DarkStealth — WP Plugin Edition

Directory: /usr/sbin

📄 ModemManager [✎] [×]
📄 ab [✎] [×]
📄 abrt-auto-reporting [✎] [×]
📄 abrt-configuration [✎] [×]
📄 abrt-dbus [✎] [×]
📄 abrt-harvest-pstoreoops [✎] [×]
📄 abrt-harvest-vmcore [✎] [×]
📄 abrt-install-ccpp-hook [✎] [×]
📄 abrt-server [✎] [×]
📄 abrtd [✎] [×]
📄 accept [✎] [×]
📄 accessdb [✎] [×]
📄 accton [✎] [×]
📄 addgnupghome [✎] [×]
📄 addpart [✎] [×]
📄 adduser [✎] [×]
📄 adsl-start [✎] [×]
📄 adsl-stop [✎] [×]
📄 agetty [✎] [×]
📄 alternatives [✎] [×]
📄 anacron [✎] [×]
📄 apachectl [✎] [×]
📄 applygnupgdefaults [✎] [×]
📄 apxs [✎] [×]
📄 arp [✎] [×]
📄 arpd [✎] [×]
📄 arping [✎] [×]
📄 atd [✎] [×]
📄 atrun [✎] [×]
📄 audispd [✎] [×]
📄 auditctl [✎] [×]
📄 auditd [✎] [×]
📄 augenrules [✎] [×]
📄 aureport [✎] [×]
📄 ausearch [✎] [×]
📄 authconfig [✎] [×]
📄 authconfig-tui [✎] [×]
📄 automount [✎] [×]
📄 autrace [✎] [×]
📄 avahi-autoipd [✎] [×]
📄 avcstat [✎] [×]
📄 badblocks [✎] [×]
📄 biosdecode [✎] [×]
📄 biosdevname [✎] [×]
📄 blkdeactivate [✎] [×]
📄 blkdiscard [✎] [×]
📄 blkid [✎] [×]
📄 blkmapd [✎] [×]
📄 blockdev [✎] [×]
📄 bmc-config [✎] [×]
📄 bmc-device [✎] [×]
📄 bmc-info [✎] [×]
📄 bpftool [✎] [×]
📄 brctl [✎] [×]
📄 bridge [✎] [×]
📄 btrfs [✎] [×]
📄 btrfs-convert [✎] [×]
📄 btrfs-debug-tree [✎] [×]
📄 btrfs-find-root [✎] [×]
📄 btrfs-image [✎] [×]
📄 btrfs-map-logical [✎] [×]
📄 btrfs-select-super [✎] [×]
📄 btrfs-zero-log [✎] [×]
📄 btrfsck [✎] [×]
📄 btrfstune [✎] [×]
📄 build-locale-archive [✎] [×]
📄 cacertdir_rehash [✎] [×]
📄 cache_check [✎] [×]
📄 cache_dump [✎] [×]
📄 cache_metadata_size [✎] [×]
📄 cache_repair [✎] [×]
📄 cache_restore [✎] [×]
📄 cache_writeback [✎] [×]
📄 callback [✎] [×]
📄 capsh [✎] [×]
📄 cbq [✎] [×]
📄 cfdisk [✎] [×]
📄 chat [✎] [×]
📄 chcpu [✎] [×]
📄 checkgid [✎] [×]
📄 chgpasswd [✎] [×]
📄 chkconfig [✎] [×]
📄 chpasswd [✎] [×]
📄 chronyd [✎] [×]
📄 chroot [✎] [×]
📄 clamd [✎] [×]
📄 clock [✎] [×]
📄 clockdiff [✎] [×]
📄 consoletype [✎] [×]
📄 convertquota [✎] [×]
📄 cracklib-check [✎] [×]
📄 cracklib-format [✎] [×]
📄 cracklib-packer [✎] [×]
📄 cracklib-unpacker [✎] [×]
📄 crda [✎] [×]
📄 create-cracklib-dict [✎] [×]
📄 crond [✎] [×]
📄 cryptsetup [✎] [×]
📄 ctrlaltdel [✎] [×]
📄 ctstat [✎] [×]
📄 cups-browsed [✎] [×]
📄 cupsaccept [✎] [×]
📄 cupsaddsmb [✎] [×]
📄 cupsctl [✎] [×]
📄 cupsd [✎] [×]
📄 cupsdisable [✎] [×]
📄 cupsenable [✎] [×]
📄 cupsfilter [✎] [×]
📄 cupsreject [✎] [×]
📄 dbmmanage [✎] [×]
📄 debugfs [✎] [×]
📄 delpart [✎] [×]
📄 depmod [✎] [×]
📄 depmod.ksplice [✎] [×]
📄 depmod.ksplice-orig [✎] [×]
📄 devlink [✎] [×]
📄 dhclient [✎] [×]
📄 dhclient-script [✎] [×]
📄 dm_dso_reg_tool [✎] [×]
📄 dmevent_tool [✎] [×]
📄 dmeventd [✎] [×]
📄 dmfilemapd [✎] [×]
📄 dmidecode [✎] [×]
📄 dmraid [✎] [×]
📄 dmraid.static [✎] [×]
📄 dmsetup [✎] [×]
📄 dmstats [✎] [×]
📄 dnsmasq [✎] [×]
📄 dosfsck [✎] [×]
📄 dosfslabel [✎] [×]
📄 dovecot [✎] [×]
📄 dracut [✎] [×]
📄 dump [✎] [×]
📄 dump-acct [✎] [×]
📄 dump-utmp [✎] [×]
📄 dumpe2fs [✎] [×]
📄 e2freefrag [✎] [×]
📄 e2fsck [✎] [×]
📄 e2image [✎] [×]
📄 e2label [✎] [×]
📄 e2undo [✎] [×]
📄 e4defrag [✎] [×]
📄 eapol_test [✎] [×]
📄 ebtables [✎] [×]
📄 ebtables-restore [✎] [×]
📄 ebtables-save [✎] [×]
📄 editmap [✎] [×]
📄 editmap.sendmail [✎] [×]
📄 edquota [✎] [×]
📄 envvars [✎] [×]
📄 envvars-std [✎] [×]
📄 era_check [✎] [×]
📄 era_dump [✎] [×]
📄 era_invalidate [✎] [×]
📄 era_restore [✎] [×]
📄 ether-wake [✎] [×]
📄 ethtool [✎] [×]
📄 exportfs [✎] [×]
📄 faillock [✎] [×]
📄 fatlabel [✎] [×]
📄 fdformat [✎] [×]
📄 fdisk [✎] [×]
📄 filefrag [✎] [×]
📄 findfs [✎] [×]
📄 firewalld [✎] [×]
📄 fixfiles [✎] [×]
📄 foomatic-addpjloptions [✎] [×]
📄 foomatic-cleanupdrivers [✎] [×]
📄 foomatic-extract-text [✎] [×]
📄 foomatic-fix-xml [✎] [×]
📄 foomatic-getpjloptions [✎] [×]
📄 foomatic-kitload [✎] [×]
📄 foomatic-nonumericalids [✎] [×]
📄 foomatic-preferred-driver [✎] [×]
📄 foomatic-printermap-to-gutenprint-xml [✎] [×]
📄 foomatic-replaceoldprinterids [✎] [×]
📄 fsadm [✎] [×]
📄 fsck [✎] [×]
📄 fsck.btrfs [✎] [×]
📄 fsck.cramfs [✎] [×]
📄 fsck.ext2 [✎] [×]
📄 fsck.ext3 [✎] [×]
📄 fsck.ext4 [✎] [×]
📄 fsck.fat [✎] [×]
📄 fsck.minix [✎] [×]
📄 fsck.msdos [✎] [×]
📄 fsck.vfat [✎] [×]
📄 fsck.xfs [✎] [×]
📄 fsfreeze [✎] [×]
📄 fstrim [✎] [×]
📄 ftpscrub [✎] [×]
📄 ftpshut [✎] [×]
📄 fuser [✎] [×]
📄 fxload [✎] [×]
📄 genhomedircon [✎] [×]
📄 genhostid [✎] [×]
📄 genl [✎] [×]
📄 genl-ctrl-list [✎] [×]
📄 getcap [✎] [×]
📄 getenforce [✎] [×]
📄 getpcaps [✎] [×]
📄 getsebool [✎] [×]
📄 glibc_post_upgrade.i686 [✎] [×]
📄 glibc_post_upgrade.x86_64 [✎] [×]
📄 gpm [✎] [×]
📄 groupadd [✎] [×]
📄 groupdel [✎] [×]
📄 groupmems [✎] [×]
📄 groupmod [✎] [×]
📄 grpck [✎] [×]
📄 grpconv [✎] [×]
📄 grpunconv [✎] [×]
📄 grub2-bios-setup [✎] [×]
📄 grub2-get-kernel-settings [✎] [×]
📄 grub2-install [✎] [×]
📄 grub2-macbless [✎] [×]
📄 grub2-mkconfig [✎] [×]
📄 grub2-ofpathname [✎] [×]
📄 grub2-probe [✎] [×]
📄 grub2-reboot [✎] [×]
📄 grub2-rpm-sort [✎] [×]
📄 grub2-set-default [✎] [×]
📄 grub2-setpassword [✎] [×]
📄 grub2-sparc64-setup [✎] [×]
📄 grubby [✎] [×]
📄 gss-server [✎] [×]
📄 gssproxy [✎] [×]
📄 halt [✎] [×]
📄 hardlink [✎] [×]
📄 hdparm [✎] [×]
📄 htcacheclean [✎] [×]
📄 htdbm [✎] [×]
📄 htdigest [✎] [×]
📄 htpasswd [✎] [×]
📄 httpd [✎] [×]
📄 httxt2dbm [✎] [×]
📄 hwclock [✎] [×]
📄 iconvconfig [✎] [×]
📄 iconvconfig.i686 [✎] [×]
📄 iconvconfig.x86_64 [✎] [×]
📄 ifcfg [✎] [×]
📄 ifconfig [✎] [×]
📄 ifdown [✎] [×]
📄 ifenslave [✎] [×]
📄 ifstat [✎] [×]
📄 ifup [✎] [×]
📄 in.proftpd [✎] [×]
📄 init [✎] [×]
📄 insmod [✎] [×]
📄 install-info [✎] [×]
📄 installkernel [✎] [×]
📄 intel-microcode2ucode [✎] [×]
📄 iotop [✎] [×]
📄 ip [✎] [×]
📄 ip6tables [✎] [×]
📄 ip6tables-restore [✎] [×]
📄 ip6tables-save [✎] [×]
📄 ipmaddr [✎] [×]
📄 ipmi-chassis [✎] [×]
📄 ipmi-chassis-config [✎] [×]
📄 ipmi-config [✎] [×]
📄 ipmi-console [✎] [×]
📄 ipmi-dcmi [✎] [×]
📄 ipmi-detect [✎] [×]
📄 ipmi-fru [✎] [×]
📄 ipmi-locate [✎] [×]
📄 ipmi-oem [✎] [×]
📄 ipmi-pef-config [✎] [×]
📄 ipmi-pet [✎] [×]
📄 ipmi-ping [✎] [×]
📄 ipmi-power [✎] [×]
📄 ipmi-raw [✎] [×]
📄 ipmi-sel [✎] [×]
📄 ipmi-sensors [✎] [×]
📄 ipmi-sensors-config [✎] [×]
📄 ipmiconsole [✎] [×]
📄 ipmidetect [✎] [×]
📄 ipmimonitoring [✎] [×]
📄 ipmiping [✎] [×]
📄 ipmipower [✎] [×]
📄 iprconfig [✎] [×]
📄 iprdbg [✎] [×]
📄 iprdump [✎] [×]
📄 iprinit [✎] [×]
📄 iprsos [✎] [×]
📄 iprupdate [✎] [×]
📄 ipset [✎] [×]
📄 iptables [✎] [×]
📄 iptables-restore [✎] [×]
📄 iptables-save [✎] [×]
📄 iptraf [✎] [×]
📄 iptraf-ng [✎] [×]
📄 iptstate [✎] [×]
📄 iptunnel [✎] [×]
📄 irqbalance [✎] [×]
📄 iw [✎] [×]
📄 kexec [✎] [×]
📄 key.dns_resolver [✎] [×]
📄 killall5 [✎] [×]
📄 kpartx [✎] [×]
📄 kpatch [✎] [×]
📄 ksplice-depmod [✎] [×]
📄 lchage [✎] [×]
📄 ldattach [✎] [×]
📄 ldconfig [✎] [×]
📄 ledctl [✎] [×]
📄 ledmon [✎] [×]
📄 lgroupadd [✎] [×]
📄 lgroupdel [✎] [×]
📄 lgroupmod [✎] [×]
📄 lid [✎] [×]
📄 lnewusers [✎] [×]
📄 lnstat [✎] [×]
📄 load_policy [✎] [×]
📄 lockdev [✎] [×]
📄 logresolve [✎] [×]
📄 logrotate [✎] [×]
📄 logsave [✎] [×]
📄 logwatch [✎] [×]
📄 losetup [✎] [×]
📄 lpadmin [✎] [×]
📄 lpasswd [✎] [×]
📄 lpc [✎] [×]
📄 lpc.cups [✎] [×]
📄 lpinfo [✎] [×]
📄 lpmove [✎] [×]
📄 lsmod [✎] [×]
📄 lsof [✎] [×]
📄 lspci [✎] [×]
📄 luseradd [✎] [×]
📄 luserdel [✎] [×]
📄 lusermod [✎] [×]
📄 lvchange [✎] [×]
📄 lvconvert [✎] [×]
📄 lvcreate [✎] [×]
📄 lvdisplay [✎] [×]
📄 lvextend [✎] [×]
📄 lvm [✎] [×]
📄 lvmconf [✎] [×]
📄 lvmconfig [✎] [×]
📄 lvmdiskscan [✎] [×]
📄 lvmdump [✎] [×]
📄 lvmetad [✎] [×]
📄 lvmpolld [✎] [×]
📄 lvmsadc [✎] [×]
📄 lvmsar [✎] [×]
📄 lvreduce [✎] [×]
📄 lvremove [✎] [×]
📄 lvrename [✎] [×]
📄 lvresize [✎] [×]
📄 lvs [✎] [×]
📄 lvscan [✎] [×]
📄 mailstats [✎] [×]
📄 makedumpfile [✎] [×]
📄 makemap [✎] [×]
📄 makemap.sendmail [✎] [×]
📄 matchpathcon [✎] [×]
📄 mcelog [✎] [×]
📄 mcstransd [✎] [×]
📄 mdadm [✎] [×]
📄 mdmon [✎] [×]
📄 mgetty [✎] [×]
📄 mii-diag [✎] [×]
📄 mii-tool [✎] [×]
📄 mkbootdisk [✎] [×]
📄 mkdict [✎] [×]
📄 mkdosfs [✎] [×]
📄 mkdumprd [✎] [×]
📄 mke2fs [✎] [×]
📄 mkfs [✎] [×]
📄 mkfs.btrfs [✎] [×]
📄 mkfs.cramfs [✎] [×]
📄 mkfs.ext2 [✎] [×]
📄 mkfs.ext3 [✎] [×]
📄 mkfs.ext4 [✎] [×]
📄 mkfs.fat [✎] [×]
📄 mkfs.minix [✎] [×]
📄 mkfs.msdos [✎] [×]
📄 mkfs.vfat [✎] [×]
📄 mkfs.xfs [✎] [×]
📄 mkhomedir_helper [✎] [×]
📄 mklost+found [✎] [×]
📄 mksquashfs [✎] [×]
📄 mkswap [✎] [×]
📄 modinfo [✎] [×]
📄 modprobe [✎] [×]
📄 modprobe.ksplice [✎] [×]
📄 modprobe.ksplice-orig [✎] [×]
📄 mount.ecryptfs [✎] [×]
📄 mount.ecryptfs_private [✎] [×]
📄 mount.fuse [✎] [×]
📄 mount.nfs [✎] [×]
📄 mount.nfs4 [✎] [×]
📄 mountstats [✎] [×]
📄 mpathconf [✎] [×]
📄 mpathpersist [✎] [×]
📄 msshd [✎] [×]
📄 mtr [✎] [×]
📄 multipath [✎] [×]
📄 multipathd [✎] [×]
📄 mysqld [✎] [×]
📄 nameif [✎] [×]
📄 netreport [✎] [×]
📄 new-kernel-pkg [✎] [×]
📄 newusers [✎] [×]
📄 nfsdcltrack [✎] [×]
📄 nfsidmap [✎] [×]
📄 nfsiostat [✎] [×]
📄 nfsstat [✎] [×]
📄 nl-class-add [✎] [×]
📄 nl-class-delete [✎] [×]
📄 nl-class-list [✎] [×]
📄 nl-classid-lookup [✎] [×]
📄 nl-cls-add [✎] [×]
📄 nl-cls-delete [✎] [×]
📄 nl-cls-list [✎] [×]
📄 nl-link-list [✎] [×]
📄 nl-pktloc-lookup [✎] [×]
📄 nl-qdisc-add [✎] [×]
📄 nl-qdisc-delete [✎] [×]
📄 nl-qdisc-list [✎] [×]
📄 nologin [✎] [×]
📄 nscd [✎] [×]
📄 nstat [✎] [×]
📄 ntp-keygen [✎] [×]
📄 ntpd [✎] [×]
📄 ntpdate [✎] [×]
📄 ntpdc [✎] [×]
📄 ntpq [✎] [×]
📄 ntptime [✎] [×]
📄 ntsysv [✎] [×]
📄 oddjobd [✎] [×]
📄 osd_login [✎] [×]
📄 ownership [✎] [×]
📄 packer [✎] [×]
📄 pam_console_apply [✎] [×]
📄 pam_tally2 [✎] [×]
📄 pam_timestamp_check [✎] [×]
📄 paperconfig [✎] [×]
📄 parted [✎] [×]
📄 partprobe [✎] [×]
📄 partx [✎] [×]
📄 pcscd [✎] [×]
📄 pdata_tools [✎] [×]
📄 pef-config [✎] [×]
📄 pidof [✎] [×]
📄 ping6 [✎] [×]
📄 pivot_root [✎] [×]
📄 plipconfig [✎] [×]
📄 pluginviewer [✎] [×]
📄 plymouth-set-default-theme [✎] [×]
📄 plymouthd [✎] [×]
📄 pm-hibernate [✎] [×]
📄 pm-powersave [✎] [×]
📄 pm-suspend [✎] [×]
📄 pm-suspend-hybrid [✎] [×]
📄 pm-utils-bugreport-info.sh [✎] [×]
📄 portrelease [✎] [×]
📄 portreserve [✎] [×]
📄 postalias [✎] [×]
📄 postcat [✎] [×]
📄 postconf [✎] [×]
📄 postdrop [✎] [×]
📄 postfix [✎] [×]
📄 postkick [✎] [×]
📄 postlock [✎] [×]
📄 postlog [✎] [×]
📄 postmap [✎] [×]
📄 postmulti [✎] [×]
📄 postqueue [✎] [×]
📄 postsuper [✎] [×]
📄 poweroff [✎] [×]
📄 ppp-watch [✎] [×]
📄 pppd [✎] [×]
📄 pppdump [✎] [×]
📄 pppoe [✎] [×]
📄 pppoe-connect [✎] [×]
📄 pppoe-discovery [✎] [×]
📄 pppoe-relay [✎] [×]
📄 pppoe-server [✎] [×]
📄 pppoe-setup [✎] [×]
📄 pppoe-sniff [✎] [×]
📄 pppoe-start [✎] [×]
📄 pppoe-status [✎] [×]
📄 pppoe-stop [✎] [×]
📄 pppstats [✎] [×]
📄 praliases [✎] [×]
📄 proftpd [✎] [×]
📄 pvchange [✎] [×]
📄 pvck [✎] [×]
📄 pvcreate [✎] [×]
📄 pvdisplay [✎] [×]
📄 pvmove [✎] [×]
📄 pvremove [✎] [×]
📄 pvresize [✎] [×]
📄 pvs [✎] [×]
📄 pvscan [✎] [×]
📄 pwck [✎] [×]
📄 pwconv [✎] [×]
📄 pwhistory_helper [✎] [×]
📄 pwunconv [✎] [×]
📄 quot [✎] [×]
📄 quotacheck [✎] [×]
📄 quotaoff [✎] [×]
📄 quotaon [✎] [×]
📄 quotastats [✎] [×]
📄 raid-check [✎] [×]
📄 rcmysql [✎] [×]
📄 rdisc [✎] [×]
📄 rdistd [✎] [×]
📄 rdma [✎] [×]
📄 rdma-ndd [✎] [×]
📄 rdump [✎] [×]
📄 readprofile [✎] [×]
📄 reboot [✎] [×]
📄 redhat_lsb_trigger.x86_64 [✎] [×]
📄 regdbdump [✎] [×]
📄 reject [✎] [×]
📄 repquota [✎] [×]
📄 request-key [✎] [×]
📄 resize2fs [✎] [×]
📄 resizepart [✎] [×]
📄 restore [✎] [×]
📄 restorecon [✎] [×]
📄 rfkill [✎] [×]
📄 rmcp-ping [✎] [×]
📄 rmcpping [✎] [×]
📄 rmmod [✎] [×]
📄 rmt [✎] [×]
📄 rngd [✎] [×]
📄 rotatelogs [✎] [×]
📄 route [✎] [×]
📄 routef [✎] [×]
📄 routel [✎] [×]
📄 rpc.gssd [✎] [×]
📄 rpc.idmapd [✎] [×]
📄 rpc.mountd [✎] [×]
📄 rpc.nfsd [✎] [×]
📄 rpc.rquotad [✎] [×]
📄 rpc.statd [✎] [×]
📄 rpcbind [✎] [×]
📄 rpcdebug [✎] [×]
📄 rpcinfo [✎] [×]
📄 rrestore [✎] [×]
📄 rsyslogd [✎] [×]
📄 rtacct [✎] [×]
📄 rtcwake [✎] [×]
📄 rtmon [✎] [×]
📄 rtpr [✎] [×]
📄 rtstat [✎] [×]
📄 runlevel [✎] [×]
📄 runuser [✎] [×]
📄 rvnamed-ng [✎] [×]
📄 sa [✎] [×]
📄 safe_finger [✎] [×]
📄 sasl2-shared-mechlist [✎] [×]
📄 saslauthd [✎] [×]
📄 sasldblistusers2 [✎] [×]
📄 saslpasswd2 [✎] [×]
📄 seaudit [✎] [×]
📄 sefcontext_compile [✎] [×]
📄 selabel_digest [✎] [×]
📄 selabel_lookup [✎] [×]
📄 selabel_lookup_best_match [✎] [×]
📄 selabel_partial_match [✎] [×]
📄 selinux_restorecon [✎] [×]
📄 selinuxconlist [✎] [×]
📄 selinuxdefcon [✎] [×]
📄 selinuxenabled [✎] [×]
📄 selinuxexeccon [✎] [×]
📄 semanage [✎] [×]
📄 semodule [✎] [×]
📄 sendmail [✎] [×]
📄 sendmail.postfix [✎] [×]
📄 sendmail.sendmail [✎] [×]
📄 service [✎] [×]
📄 sestatus [✎] [×]
📄 setcap [✎] [×]
📄 setenforce [✎] [×]
📄 setfiles [✎] [×]
📄 setpci [✎] [×]
📄 setquota [✎] [×]
📄 setregdomain [✎] [×]
📄 setsebool [✎] [×]
📄 setup [✎] [×]
📄 sfdisk [✎] [×]
📄 sgpio [✎] [×]
📄 showmount [✎] [×]
📄 shutdown [✎] [×]
📄 sim_server [✎] [×]
📄 slattach [✎] [×]
📄 sln [✎] [×]
📄 sm-notify [✎] [×]
📄 smartctl [✎] [×]
📄 smartd [✎] [×]
📄 smrsh [✎] [×]
📄 smtp-sink [✎] [×]
📄 smtp-source [✎] [×]
📄 sosreport [✎] [×]
📄 ss [✎] [×]
📄 sshd [✎] [×]
📄 sshd-keygen [✎] [×]
📄 start-statd [✎] [×]
📄 sulogin [✎] [×]
📄 sushell [✎] [×]
📄 swaplabel [✎] [×]
📄 swapoff [✎] [×]
📄 swapon [✎] [×]
📄 switch_root [✎] [×]
📄 sys-unconfig [✎] [×]
📄 sysctl [✎] [×]
📄 tc [✎] [×]
📄 tcpd [✎] [×]
📄 tcpdmatch [✎] [×]
📄 tcpdump [✎] [×]
📄 tcpslice [✎] [×]
📄 tcsd [✎] [×]
📄 telinit [✎] [×]
📄 testsaslauthd [✎] [×]
📄 thin_check [✎] [×]
📄 thin_delta [✎] [×]
📄 thin_dump [✎] [×]
📄 thin_ls [✎] [×]
📄 thin_metadata_size [✎] [×]
📄 thin_repair [✎] [×]
📄 thin_restore [✎] [×]
📄 thin_rmap [✎] [×]
📄 thin_trim [✎] [×]
📄 tickadj [✎] [×]
📄 tracepath [✎] [×]
📄 tracepath6 [✎] [×]
📄 try-from [✎] [×]
📄 tune2fs [✎] [×]
📄 tuned [✎] [×]
📄 tuned-adm [✎] [×]
📄 udevadm [✎] [×]
📄 umount.ecryptfs [✎] [×]
📄 umount.ecryptfs_private [✎] [×]
📄 umount.nfs [✎] [×]
📄 umount.nfs4 [✎] [×]
📄 unix_chkpwd [✎] [×]
📄 unix_update [✎] [×]
📄 unsquashfs [✎] [×]
📄 update-alternatives [✎] [×]
📄 update-pciids [✎] [×]
📄 update-smart-drivedb [✎] [×]
📄 uptrack-install [✎] [×]
📄 uptrack-remove [✎] [×]
📄 uptrack-show [✎] [×]
📄 uptrack-upgrade [✎] [×]
📄 usb_modeswitch [✎] [×]
📄 usb_modeswitch_dispatcher [✎] [×]
📄 useradd [✎] [×]
📄 userdel [✎] [×]
📄 userhelper [✎] [×]
📄 usermod [✎] [×]
📄 usernetctl [✎] [×]
📄 uuserver [✎] [×]
📄 vgcfgbackup [✎] [×]
📄 vgcfgrestore [✎] [×]
📄 vgchange [✎] [×]
📄 vgck [✎] [×]
📄 vgconvert [✎] [×]
📄 vgcreate [✎] [×]
📄 vgdisplay [✎] [×]
📄 vgexport [✎] [×]
📄 vgextend [✎] [×]
📄 vgimport [✎] [×]
📄 vgimportclone [✎] [×]
📄 vgmerge [✎] [×]
📄 vgmknodes [✎] [×]
📄 vgreduce [✎] [×]
📄 vgremove [✎] [×]
📄 vgrename [✎] [×]
📄 vgs [✎] [×]
📄 vgscan [✎] [×]
📄 vgsplit [✎] [×]
📄 vigr [✎] [×]
📄 vipw [✎] [×]
📄 virt-what [✎] [×]
📄 visudo [✎] [×]
📄 vmcore-dmesg [✎] [×]
📄 vpddecode [✎] [×]
📄 weak-modules [✎] [×]
📄 wipefs [✎] [×]
📄 wpa_cli [✎] [×]
📄 wpa_passphrase [✎] [×]
📄 wpa_supplicant [✎] [×]
📄 xfs_admin [✎] [×]
📄 xfs_bmap [✎] [×]
📄 xfs_copy [✎] [×]
📄 xfs_db [✎] [×]
📄 xfs_estimate [✎] [×]
📄 xfs_freeze [✎] [×]
📄 xfs_fsr [✎] [×]
📄 xfs_growfs [✎] [×]
📄 xfs_info [✎] [×]
📄 xfs_io [✎] [×]
📄 xfs_logprint [✎] [×]
📄 xfs_mdrestore [✎] [×]
📄 xfs_metadump [✎] [×]
📄 xfs_mkfile [✎] [×]
📄 xfs_ncheck [✎] [×]
📄 xfs_quota [✎] [×]
📄 xfs_repair [✎] [×]
📄 xfs_rtcp [✎] [×]
📄 xfsdump [✎] [×]
📄 xfsinvutil [✎] [×]
📄 xfsrestore [✎] [×]
📄 xqmstats [✎] [×]
📄 xtables-multi [✎] [×]
📄 ypbind [✎] [×]
📄 yppoll [✎] [×]
📄 ypset [✎] [×]
📄 yptest [✎] [×]
📄 yum-complete-transaction [✎] [×]
📄 yumdb [✎] [×]
📄 zdump [✎] [×]
📄 zic [✎] [×]
📄 zramctl [✎] [×]