✏️ Editing: splain

#!/usr/bin/perl
    eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
	if $running_under_some_shell;

=head1 NAME

diagnostics, splain - produce verbose warning diagnostics

=head1 SYNOPSIS

Using the C<diagnostics> pragma:

use diagnostics;
    use diagnostics -verbose;

enable  diagnostics;
    disable diagnostics;

Using the C<splain> standalone filter program:

perl program 2>diag.out
    splain [-v] [-p] diag.out

Using diagnostics to get stack traces from a misbehaving script:

perl -Mdiagnostics=-traceonly my_script.pl

=head1 DESCRIPTION

=head2 The C<diagnostics> Pragma

This module extends the terse diagnostics normally emitted by both the
perl compiler and the perl interpreter (from running perl with a -w 
switch or C<use warnings>), augmenting them with the more
explicative and endearing descriptions found in L<perldiag>.  Like the
other pragmata, it affects the compilation phase of your program rather
than merely the execution phase.

To use in your program as a pragma, merely invoke

use diagnostics;

at the start (or near the start) of your program.  (Note 
that this I<does> enable perl's B<-w> flag.)  Your whole
compilation will then be subject(ed :-) to the enhanced diagnostics.
These still go out B<STDERR>.

Due to the interaction between runtime and compiletime issues,
and because it's probably not a very good idea anyway,
you may not use C<no diagnostics> to turn them off at compiletime.
However, you may control their behaviour at runtime using the 
disable() and enable() methods to turn them off and on respectively.

The B<-verbose> flag first prints out the L<perldiag> introduction before
any other diagnostics.  The $diagnostics::PRETTY variable can generate nicer
escape sequences for pagers.

Warnings dispatched from perl itself (or more accurately, those that match
descriptions found in L<perldiag>) are only displayed once (no duplicate
descriptions).  User code generated warnings a la warn() are unaffected,
allowing duplicate user messages to be displayed.

This module also adds a stack trace to the error message when perl dies.
This is useful for pinpointing what
caused the death.  The B<-traceonly> (or
just B<-t>) flag turns off the explanations of warning messages leaving just
the stack traces.  So if your script is dieing, run it again with

perl -Mdiagnostics=-traceonly my_bad_script

to see the call stack at the time of death.  By supplying the B<-warntrace>
(or just B<-w>) flag, any warnings emitted will also come with a stack
trace.

=head2 The I<splain> Program

While apparently a whole nuther program, I<splain> is actually nothing
more than a link to the (executable) F<diagnostics.pm> module, as well as
a link to the F<diagnostics.pod> documentation.  The B<-v> flag is like
the C<use diagnostics -verbose> directive.
The B<-p> flag is like the
$diagnostics::PRETTY variable.  Since you're post-processing with 
I<splain>, there's no sense in being able to enable() or disable() processing.

Output from I<splain> is directed to B<STDOUT>, unlike the pragma.

=head1 EXAMPLES

The following file is certain to trigger a few errors at both
runtime and compiletime:

use diagnostics;
    print NOWHERE "nothing\n";
    print STDERR "\n\tThis message should be unadorned.\n";
    warn "\tThis is a user warning";
    print "\nDIAGNOSTIC TESTER: Please enter a <CR> here: ";
    my $a, $b = scalar <STDIN>;
    print "\n";
    print $x/$y;

If you prefer to run your program first and look at its problem
afterwards, do this:

perl -w test.pl 2>test.out
    ./splain < test.out

Note that this is not in general possible in shells of more dubious heritage, 
as the theoretical

(perl -w test.pl >/dev/tty) >& test.out
    ./splain < test.out

Because you just moved the existing B<stdout> to somewhere else.

If you don't want to modify your source code, but still have on-the-fly
warnings, do this:

exec 3>&1; perl -w test.pl 2>&1 1>&3 3>&- | splain 1>&2 3>&-

Nifty, eh?

If you want to control warnings on the fly, do something like this.
Make sure you do the C<use> first, or you won't be able to get
at the enable() or disable() methods.

use diagnostics; # checks entire compilation phase 
	print "\ntime for 1st bogus diags: SQUAWKINGS\n";
	print BOGUS1 'nada';
	print "done with 1st bogus\n";

disable diagnostics; # only turns off runtime warnings
	print "\ntime for 2nd bogus: (squelched)\n";
	print BOGUS2 'nada';
	print "done with 2nd bogus\n";

enable diagnostics; # turns back on runtime warnings
	print "\ntime for 3rd bogus: SQUAWKINGS\n";
	print BOGUS3 'nada';
	print "done with 3rd bogus\n";

disable diagnostics;
	print "\ntime for 4th bogus: (squelched)\n";
	print BOGUS4 'nada';
	print "done with 4th bogus\n";

=head1 INTERNALS

Diagnostic messages derive from the F<perldiag.pod> file when available at
runtime.  Otherwise, they may be embedded in the file itself when the
splain package is built.   See the F<Makefile> for details.

If an extant $SIG{__WARN__} handler is discovered, it will continue
to be honored, but only after the diagnostics::splainthis() function 
(the module's $SIG{__WARN__} interceptor) has had its way with your
warnings.

There is a $diagnostics::DEBUG variable you may set if you're desperately
curious what sorts of things are being intercepted.

BEGIN { $diagnostics::DEBUG = 1 }

=head1 BUGS

Not being able to say "no diagnostics" is annoying, but may not be
insurmountable.

The C<-pretty> directive is called too late to affect matters.
You have to do this instead, and I<before> you load the module.

BEGIN { $diagnostics::PRETTY = 1 }

I could start up faster by delaying compilation until it should be
needed, but this gets a "panic: top_level" when using the pragma form
in Perl 5.001e.

While it's true that this documentation is somewhat subserious, if you use
a program named I<splain>, you should expect a bit of whimsy.

=head1 AUTHOR

Tom Christiansen <F<tchrist@mox.perl.com>>, 25 June 1995.

=cut

use strict;
use 5.009001;
use Carp;
$Carp::Internal{__PACKAGE__.""}++;

our $VERSION = '1.28';
our $DEBUG;
our $VERBOSE;
our $PRETTY;
our $TRACEONLY = 0;
our $WARNTRACE = 0;

use Config;
my $privlib = $Config{privlibexp};
if ($^O eq 'VMS') {
    require VMS::Filespec;
    $privlib = VMS::Filespec::unixify($privlib);
}
my @trypod = (
	   "$privlib/pod/perldiag.pod",
	   "$privlib/pods/perldiag.pod",
	  );
# handy for development testing of new warnings etc
unshift @trypod, "./pod/perldiag.pod" if -e "pod/perldiag.pod";
(my $PODFILE) = ((grep { -e } @trypod), $trypod[$#trypod])[0];

$DEBUG ||= 0;
my $WHOAMI = ref bless [];  # nobody's business, prolly not even mine

local $| = 1;
local $_;
local $.;

my $standalone;
my(%HTML_2_Troff, %HTML_2_Latin_1, %HTML_2_ASCII_7);

CONFIG: {
    our $opt_p = our $opt_d = our $opt_v = our $opt_f = '';

unless (caller) {
	$standalone++;
	require Getopt::Std;
	Getopt::Std::getopts('pdvf:')
	    or die "Usage: $0 [-v] [-p] [-f splainpod]";
	$PODFILE = $opt_f if $opt_f;
	$DEBUG = 2 if $opt_d;
	$VERBOSE = $opt_v;
	$PRETTY = $opt_p;
    }

if (open(POD_DIAG, $PODFILE)) {
	warn "Happy happy podfile from real $PODFILE\n" if $DEBUG;
	last CONFIG;
    }

if (caller) {
	INCPATH: {
	    for my $file ( (map { "$_/$WHOAMI.pm" } @INC), $0) {
		warn "Checking $file\n" if $DEBUG;
		if (open(POD_DIAG, $file)) {
		    while (<POD_DIAG>) {
			next unless
			    /^__END__\s*# wish diag dbase were more accessible/;
			print STDERR "podfile is $file\n" if $DEBUG;
			last INCPATH;
		    }
		}
	    } 
	}
    } else { 
	print STDERR "podfile is <DATA>\n" if $DEBUG;
	*POD_DIAG = *main::DATA;
    }
}
if (eof(POD_DIAG)) { 
    die "couldn't find diagnostic data in $PODFILE @INC $0";
}

%HTML_2_Troff = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"A\\*'",	#   capital A, acute accent
    # etc

);

%HTML_2_Latin_1 = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"\xC1"	#   capital A, acute accent

# etc
);

%HTML_2_ASCII_7 = (
    'amp'	=>	'&',	#   ampersand
    'lt'	=>	'<',	#   left chevron, less-than
    'gt'	=>	'>',	#   right chevron, greater-than
    'quot'	=>	'"',	#   double quote

"Aacute"	=>	"A"	#   capital A, acute accent
    # etc
);

our %HTML_Escapes;
*HTML_Escapes = do {
    if ($standalone) {
	$PRETTY ? \%HTML_2_Latin_1 : \%HTML_2_ASCII_7; 
    } else {
	\%HTML_2_Latin_1; 
    }
};

*THITHER = $standalone ? *STDOUT : *STDERR;

my %transfmt = (); 
my $transmo = <<EOFUNC;
sub transmo {
    #local \$^W = 0;  # recursive warnings we do NOT need!
EOFUNC

my %msg;
{
    print STDERR "FINISHING COMPILATION for $_\n" if $DEBUG;
    local $/ = '';
    local $_;
    my $header;
    my @headers;
    my $for_item;
    my $seen_body;
    while (<POD_DIAG>) {

sub _split_pod_link {
	    $_[0] =~ '(?:([^|]*)\|)?([^/]*)(?:/("?)(.*)\3)?';
	    ($1,$2,$4);
	}

unescape();
	if ($PRETTY) {
	    sub noop   { return $_[0] }  # spensive for a noop
	    sub bold   { my $str =$_[0];  $str =~ s/(.)/$1\b$1/g; return $str; } 
	    sub italic { my $str = $_[0]; $str =~ s/(.)/_\b$1/g;  return $str; } 
	    s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/bold($+)/ges;
	    s/[IF]<(.*?)>/italic($1)/ges;
	    s/L<(.*?)>/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? italic($sect) . ' in ' . italic($page)
	           : italic($page)
	     /ges;
	     s/S<(.*?)>/
               $1
             /ges;
	} else {
	    s/C<<< (.*?) >>>|C<< (.*?) >>|[BC]<(.*?)>/$+/gs;
	    s/[IF]<(.*?)>/$1/gs;
	    s/L<(.*?)>/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? qq '"$sect" in $page'
	           : $page
	     /ges;
	    s/S<(.*?)>/
               $1
             /ges;
	} 
	unless (/^=/) {
	    if (defined $header) { 
		if ( $header eq 'DESCRIPTION' && 
		    (   /Optional warnings are enabled/ 
		     || /Some of these messages are generic./
		    ) )
		{
		    next;
		}
		s/^/    /gm;
		$msg{$header} .= $_;
		for my $h(@headers) { $msg{$h} .= $_ }
		++$seen_body;
	 	undef $for_item;	
	    }
	    next;
	}

# If we have not come across the body of the description yet, then
	# the previous header needs to share the same description.
	if ($seen_body) {
	    @headers = ();
	}
	else {
	    push @headers, $header if defined $header;
	}

unless ( s/=item (.*?)\s*\z//) {

if ( s/=head1\sDESCRIPTION//) {
		$msg{$header = 'DESCRIPTION'} = '';
		undef $for_item;
	    }
	    elsif( s/^=for\s+diagnostics\s*\n(.*?)\s*\z// ) {
		$for_item = $1;
	    } 
	    next;
	}

if( $for_item ) { $header = $for_item; undef $for_item } 
	else {
	    $header = $1;
	    while( $header =~ /[;,]\z/ ) {
		<POD_DIAG> =~ /^\s*(.*?)\s*\z/;
		$header .= ' '.$1;
	    }
	}

# strip formatting directives from =item line
	$header =~ s/[A-Z]<(.*?)>/$1/g;

# Since we strip "\.\n" when we search a warning, strip it here as well
	$header =~ s/\.?$//;

my @toks = split( /(%l?[dxX]|%u|%c|%(?:\.\d+)?[fs])/, $header );
	if (@toks > 1) {
            my $conlen = 0;
            for my $i (0..$#toks){
                if( $i % 2 ){
                    if(      $toks[$i] eq '%c' ){
                        $toks[$i] = '.';
                    } elsif( $toks[$i] =~ /^%(?:d|u)$/ ){
                        $toks[$i] = '\d+';
                    } elsif( $toks[$i] =~ '^%(?:s|.*f)$' ){
                        $toks[$i] = $i == $#toks ? '.*' : '.*?';
                    } elsif( $toks[$i] =~ '%.(\d+)s' ){
                        $toks[$i] = ".{$1}";
                    } elsif( $toks[$i] =~ '^%l*([xX])$' ){
                        $toks[$i] = $1 eq 'x' ? '[\da-f]+' : '[\dA-F]+';
                    }
                } elsif( length( $toks[$i] ) ){
                    $toks[$i] = quotemeta $toks[$i];
                    $conlen += length( $toks[$i] );
                }
            }  
            my $lhs = join( '', @toks );
	    $transfmt{$header}{pat} =
              "    s{^$lhs}\n     {\Q$header\E}s\n\t&& return 1;\n";
            $transfmt{$header}{len} = $conlen;
	} else {
            $transfmt{$header}{pat} =
	      "    m{^\Q$header\E} && return 1;\n";
            $transfmt{$header}{len} = length( $header );
	}

print STDERR "$WHOAMI: Duplicate entry: \"$header\"\n"
	    if $msg{$header};

$msg{$header} = '';
	$seen_body = 0;
    }

close POD_DIAG unless *main::DATA eq *POD_DIAG;

die "No diagnostics?" unless %msg;

# Apply patterns in order of decreasing sum of lengths of fixed parts
    # Seems the best way of hitting the right one.
    for my $hdr ( sort { $transfmt{$b}{len} <=> $transfmt{$a}{len} }
                  keys %transfmt ){
        $transmo .= $transfmt{$hdr}{pat};
    }
    $transmo .= "    return 0;\n}\n";
    print STDERR $transmo if $DEBUG;
    eval $transmo;
    die $@ if $@;
}

if ($standalone) {
    if (!@ARGV and -t STDIN) { print STDERR "$0: Reading from STDIN\n" } 
    while (defined (my $error = <>)) {
	splainthis($error) || print THITHER $error;
    } 
    exit;
}

my $olddie;
my $oldwarn;

sub import {
    shift;
    $^W = 1; # yup, clobbered the global variable; 
	     # tough, if you want diags, you want diags.
    return if defined $SIG{__WARN__} && ($SIG{__WARN__} eq \&warn_trap);

for (@_) {

/^-d(ebug)?$/ 	   	&& do {
				    $DEBUG++;
				    next;
				   };

/^-v(erbose)?$/ 	&& do {
				    $VERBOSE++;
				    next;
				   };

/^-p(retty)?$/ 		&& do {
				    print STDERR "$0: I'm afraid it's too late for prettiness.\n";
				    $PRETTY++;
				    next;
			       };
	# matches trace and traceonly for legacy doc mixup reasons
	/^-t(race(only)?)?$/	&& do {
				    $TRACEONLY++;
				    next;
			       };
	/^-w(arntrace)?$/ 	&& do {
				    $WARNTRACE++;
				    next;
			       };

warn "Unknown flag: $_";
    }

$oldwarn = $SIG{__WARN__};
    $olddie = $SIG{__DIE__};
    $SIG{__WARN__} = \&warn_trap;
    $SIG{__DIE__} = \&death_trap;
}

sub enable { &import }

sub disable {
    shift;
    return unless $SIG{__WARN__} eq \&warn_trap;
    $SIG{__WARN__} = $oldwarn || '';
    $SIG{__DIE__} = $olddie || '';
}

sub warn_trap {
    my $warning = $_[0];
    if (caller eq $WHOAMI or !splainthis($warning)) {
	if ($WARNTRACE) {
	    print STDERR Carp::longmess($warning);
	} else {
	    print STDERR $warning;
	}
    } 
    goto &$oldwarn if defined $oldwarn and $oldwarn and $oldwarn ne \&warn_trap;
};

sub death_trap {
    my $exception = $_[0];

# See if we are coming from anywhere within an eval. If so we don't
    # want to explain the exception because it's going to get caught.
    my $in_eval = 0;
    my $i = 0;
    while (my $caller = (caller($i++))[3]) {
      if ($caller eq '(eval)') {
	$in_eval = 1;
	last;
      }
    }

splainthis($exception) unless $in_eval;
    if (caller eq $WHOAMI) { print STDERR "INTERNAL EXCEPTION: $exception"; } 
    &$olddie if defined $olddie and $olddie and $olddie ne \&death_trap;

return if $in_eval;

# We don't want to unset these if we're coming from an eval because
    # then we've turned off diagnostics.

# Switch off our die/warn handlers so we don't wind up in our own
    # traps.
    $SIG{__DIE__} = $SIG{__WARN__} = '';

$exception =~ s/\n(?=.)/\n\t/gas;

die Carp::longmess("__diagnostics__")
	  =~ s/^__diagnostics__.*?line \d+\.?\n/
		  "Uncaught exception from user code:\n\t$exception"
	      /re;
	# up we go; where we stop, nobody knows, but i think we die now
	# but i'm deeply afraid of the &$olddie guy reraising and us getting
	# into an indirect recursion loop
};

my %exact_duplicate;
my %old_diag;
my $count;
my $wantspace;
sub splainthis {
  return 0 if $TRACEONLY;
  for (my $tmp = shift) {
    local $\;
    local $!;
    ### &finish_compilation unless %msg;
    s/\.?\n+$//;
    my $orig = $_;
    # return unless defined;

# get rid of the where-are-we-in-input part
    s/, <.*?> (?:line|chunk).*$//;

# Discard 1st " at <file> line <no>" and all text beyond
    # but be aware of messages containing " at this-or-that"
    my $real = 0;
    my @secs = split( / at / );
    return unless @secs;
    $_ = $secs[0];
    for my $i ( 1..$#secs ){
        if( $secs[$i] =~ /.+? (?:line|chunk) \d+/ ){
            $real = 1;
            last;
        } else {
            $_ .= ' at ' . $secs[$i];
	}
    }
    
    # remove parenthesis occurring at the end of some messages 
    s/^\((.*)\)$/$1/;

if ($exact_duplicate{$orig}++) {
	return &transmo;
    } else {
	return 0 unless &transmo;
    }

my $short = shorten($orig);
    if ($old_diag{$_}) {
	autodescribe();
	print THITHER "$short (#$old_diag{$_})\n";
	$wantspace = 1;
    } elsif (!$msg{$_} && $orig =~ /\n./s) {
	# A multiline message, like "Attempt to reload /
	# Compilation failed"
	my $found;
	for (split /^/, $orig) {
	    splainthis($_) and $found = 1;
	}
	return $found;
    } else {
	autodescribe();
	$old_diag{$_} = ++$count;
	print THITHER "\n" if $wantspace;
	$wantspace = 0;
	print THITHER "$short (#$old_diag{$_})\n";
	if ($msg{$_}) {
	    print THITHER $msg{$_};
	} else {
	    if (0 and $standalone) { 
		print THITHER "    **** Error #$old_diag{$_} ",
			($real ? "is" : "appears to be"),
			" an unknown diagnostic message.\n\n";
	    }
	    return 0;
	} 
    }
    return 1;
  }
}

sub autodescribe {
    if ($VERBOSE and not $count) {
	print THITHER &{$PRETTY ? \&bold : \&noop}("DESCRIPTION OF DIAGNOSTICS"),
		"\n$msg{DESCRIPTION}\n";
    } 
}

sub unescape { 
    s {
            E<  
            ( [A-Za-z]+ )       
            >   
    } { 
         do {   
             exists $HTML_Escapes{$1}
                ? do { $HTML_Escapes{$1} }
                : do {
                    warn "Unknown escape: E<$1> in $_";
                    "E<$1>";
                } 
         } 
    }egx;
}

sub shorten {
    my $line = $_[0];
    if (length($line) > 79 and index($line, "\n") == -1) {
	my $space_place = rindex($line, ' ', 79);
	if ($space_place != -1) {
	    substr($line, $space_place, 1) = "\n\t";
	} 
    } 
    return $line;
}

1 unless $standalone;  # or it'll complain about itself
__END__ # wish diag dbase were more accessible

🌑 DarkStealth — WP Plugin Edition

Directory: /usr/bin

📄 GET [✎] [×]
📄 Grep [✎] [×]
📄 HEAD [✎] [×]
📄 Mail [✎] [×]
📄 POST [✎] [×]
📄 [ [✎] [×]
📄 a2p [✎] [×]
📄 abrt-action-analyze-backtrace [✎] [×]
📄 abrt-action-analyze-c [✎] [×]
📄 abrt-action-analyze-ccpp-local [✎] [×]
📄 abrt-action-analyze-core [✎] [×]
📄 abrt-action-analyze-oops [✎] [×]
📄 abrt-action-analyze-python [✎] [×]
📄 abrt-action-analyze-vmcore [✎] [×]
📄 abrt-action-analyze-vulnerability [✎] [×]
📄 abrt-action-analyze-xorg [✎] [×]
📄 abrt-action-check-oops-for-hw-error [✎] [×]
📄 abrt-action-generate-backtrace [✎] [×]
📄 abrt-action-generate-core-backtrace [✎] [×]
📄 abrt-action-install-debuginfo [✎] [×]
📄 abrt-action-list-dsos [✎] [×]
📄 abrt-action-notify [✎] [×]
📄 abrt-action-perform-ccpp-analysis [✎] [×]
📄 abrt-action-save-kernel-data [✎] [×]
📄 abrt-action-save-package-data [✎] [×]
📄 abrt-action-trim-files [✎] [×]
📄 abrt-cli [✎] [×]
📄 abrt-dump-oops [✎] [×]
📄 abrt-dump-xorg [✎] [×]
📄 abrt-handle-upload [✎] [×]
📄 abrt-merge-pstoreoops [✎] [×]
📄 abrt-retrace-client [✎] [×]
📄 abrt-watch-log [✎] [×]
📄 ac [✎] [×]
📄 aclocal [✎] [×]
📄 aclocal-1.13 [✎] [×]
📄 addr2line [✎] [×]
📄 afs5log [✎] [×]
📄 alias [✎] [×]
📄 amuFormat.sh [✎] [×]
📄 apol [✎] [×]
📄 apr-1-config [✎] [×]
📄 apropos [✎] [×]
📄 apu-1-config [✎] [×]
📄 ar [✎] [×]
📄 arch [✎] [×]
📄 aria_chk [✎] [×]
📄 aria_dump_log [✎] [×]
📄 aria_ftdump [✎] [×]
📄 aria_pack [✎] [×]
📄 aria_read_log [✎] [×]
📄 as [✎] [×]
📄 aserver [✎] [×]
📄 aspell [✎] [×]
📄 at [✎] [×]
📄 atq [✎] [×]
📄 atrm [✎] [×]
📄 attr [✎] [×]
📄 audit2allow [✎] [×]
📄 audit2why [✎] [×]
📄 aulast [✎] [×]
📄 aulastlog [✎] [×]
📄 ausyscall [✎] [×]
📄 autoconf [✎] [×]
📄 autoexpect [✎] [×]
📄 autoheader [✎] [×]
📄 autom4te [✎] [×]
📄 automake [✎] [×]
📄 automake-1.13 [✎] [×]
📄 autoreconf [✎] [×]
📄 autoscan [✎] [×]
📄 autoupdate [✎] [×]
📄 auvirt [✎] [×]
📄 awk [✎] [×]
📄 base64 [✎] [×]
📄 basename [✎] [×]
📄 bash [✎] [×]
📄 bashbug [✎] [×]
📄 bashbug-64 [✎] [×]
📄 batch [✎] [×]
📄 bc [✎] [×]
📄 bdftopcf [✎] [×]
📄 bdftruncate [✎] [×]
📄 bg [✎] [×]
📄 bison [✎] [×]
📄 blkiomon [✎] [×]
📄 blkparse [✎] [×]
📄 blkrawverify [✎] [×]
📄 blktrace [✎] [×]
📄 bno_plot.py [✎] [×]
📄 bond2team [✎] [×]
📄 bootctl [✎] [×]
📄 btrace [✎] [×]
📄 btrecord [✎] [×]
📄 btreplay [✎] [×]
📄 btt [✎] [×]
📄 bunzip2 [✎] [×]
📄 busctl [✎] [×]
📄 byacc [✎] [×]
📄 bzcat [✎] [×]
📄 bzcmp [✎] [×]
📄 bzdiff [✎] [×]
📄 bzgrep [✎] [×]
📄 bzip2 [✎] [×]
📄 bzip2recover [✎] [×]
📄 bzless [✎] [×]
📄 bzmore [✎] [×]
📄 c++ [✎] [×]
📄 c++filt [✎] [×]
📄 c2ph [✎] [×]
📄 c89 [✎] [×]
📄 c99 [✎] [×]
📄 ca-legacy [✎] [×]
📄 cairo-sphinx [✎] [×]
📄 cal [✎] [×]
📄 canberra-boot [✎] [×]
📄 canberra-gtk-play [✎] [×]
📄 cancel [✎] [×]
📄 cancel.cups [✎] [×]
📄 captoinfo [✎] [×]
📄 card_eventmgr [✎] [×]
📄 cat [✎] [×]
📄 catchsegv [✎] [×]
📄 catman [✎] [×]
📄 cc [✎] [×]
📄 ccmakedep [✎] [×]
📄 cd [✎] [×]
📄 cd-create-profile [✎] [×]
📄 cd-fix-profile [✎] [×]
📄 cd-iccdump [✎] [×]
📄 cd-it8 [✎] [×]
📄 cdrwtool [✎] [×]
📄 centrino-decode [✎] [×]
📄 certbot [✎] [×]
📄 certutil [✎] [×]
📄 chacl [✎] [×]
📄 chage [✎] [×]
📄 chardetect [✎] [×]
📄 chattr [✎] [×]
📄 chcat [✎] [×]
📄 chcon [✎] [×]
📄 checkmodule [✎] [×]
📄 checkpolicy [✎] [×]
📄 chfn [✎] [×]
📄 chgrp [✎] [×]
📄 chmem [✎] [×]
📄 chmod [✎] [×]
📄 chown [✎] [×]
📄 chronyc [✎] [×]
📄 chrt [✎] [×]
📄 chsh [✎] [×]
📄 chvt [✎] [×]
📄 cifsiostat [✎] [×]
📄 cksum [✎] [×]
📄 clamav-config [✎] [×]
📄 clambc [✎] [×]
📄 clamconf [✎] [×]
📄 clamdscan [✎] [×]
📄 clamdtop [✎] [×]
📄 clamscan [✎] [×]
📄 clamsubmit [✎] [×]
📄 cleanlinks [✎] [×]
📄 clear [✎] [×]
📄 cmp [✎] [×]
📄 cmsutil [✎] [×]
📄 col [✎] [×]
📄 colcrt [✎] [×]
📄 colormgr [✎] [×]
📄 colrm [✎] [×]
📄 column [✎] [×]
📄 comm [✎] [×]
📄 command [✎] [×]
📄 compile_et [✎] [×]
📄 consolehelper [✎] [×]
📄 coredumpctl [✎] [×]
📄 cp [✎] [×]
📄 cpan [✎] [×]
📄 cpio [✎] [×]
📄 cpp [✎] [×]
📄 cpupower [✎] [×]
📄 crash [✎] [×]
📄 crlutil [✎] [×]
📄 crontab [✎] [×]
📄 csh [✎] [×]
📄 csplit [✎] [×]
📄 csslint-0.6 [✎] [×]
📄 cupstestdsc [✎] [×]
📄 cupstestppd [✎] [×]
📄 curl [✎] [×]
📄 curl-config [✎] [×]
📄 cut [✎] [×]
📄 cvs [✎] [×]
📄 cvsbug [✎] [×]
📄 cvtsudoers [✎] [×]
📄 date [✎] [×]
📄 db_archive [✎] [×]
📄 db_checkpoint [✎] [×]
📄 db_deadlock [✎] [×]
📄 db_dump [✎] [×]
📄 db_dump185 [✎] [×]
📄 db_hotbackup [✎] [×]
📄 db_load [✎] [×]
📄 db_log_verify [✎] [×]
📄 db_printlog [✎] [×]
📄 db_recover [✎] [×]
📄 db_replicate [✎] [×]
📄 db_stat [✎] [×]
📄 db_tuner [✎] [×]
📄 db_upgrade [✎] [×]
📄 db_verify [✎] [×]
📄 dbilogstrip [✎] [×]
📄 dbiprof [✎] [×]
📄 dbiproxy [✎] [×]
📄 dbus-binding-tool [✎] [×]
📄 dbus-cleanup-sockets [✎] [×]
📄 dbus-daemon [✎] [×]
📄 dbus-monitor [✎] [×]
📄 dbus-run-session [✎] [×]
📄 dbus-send [✎] [×]
📄 dbus-test-tool [✎] [×]
📄 dbus-update-activation-environment [✎] [×]
📄 dbus-uuidgen [✎] [×]
📄 dc [✎] [×]
📄 dconf [✎] [×]
📄 dd [✎] [×]
📄 deallocvt [✎] [×]
📄 debuginfo-install [✎] [×]
📄 dehydrated [✎] [×]
📄 delv [✎] [×]
📄 desktop-file-edit [✎] [×]
📄 desktop-file-install [✎] [×]
📄 desktop-file-validate [✎] [×]
📄 df [✎] [×]
📄 dgawk [✎] [×]
📄 dialog [✎] [×]
📄 diff [✎] [×]
📄 diff3 [✎] [×]
📄 dig [✎] [×]
📄 dir [✎] [×]
📄 dircolors [✎] [×]
📄 dirname [✎] [×]
📄 disable-paste [✎] [×]
📄 disktype [✎] [×]
📄 dislocate [✎] [×]
📄 display-buttons [✎] [×]
📄 display-coords [✎] [×]
📄 dm_date [✎] [×]
📄 dm_zdump [✎] [×]
📄 dmesg [✎] [×]
📄 dnsdomainname [✎] [×]
📄 domainname [✎] [×]
📄 dos2unix [✎] [×]
📄 doveadm [✎] [×]
📄 doveconf [✎] [×]
📄 dracut [✎] [×]
📄 dsync [✎] [×]
📄 dtrace [✎] [×]
📄 du [✎] [×]
📄 dumpiso [✎] [×]
📄 dumpkeys [✎] [×]
📄 dumpsexp [✎] [×]
📄 dvcont [✎] [×]
📄 dvipdf [✎] [×]
📄 dwp [✎] [×]
📄 easy_install [✎] [×]
📄 easy_install-2.7 [✎] [×]
📄 echo [✎] [×]
📄 ecryptfs-add-passphrase [✎] [×]
📄 ecryptfs-find [✎] [×]
📄 ecryptfs-generate-tpm-key [✎] [×]
📄 ecryptfs-insert-wrapped-passphrase-into-keyring [✎] [×]
📄 ecryptfs-manager [✎] [×]
📄 ecryptfs-migrate-home [✎] [×]
📄 ecryptfs-mount-private [✎] [×]
📄 ecryptfs-recover-private [✎] [×]
📄 ecryptfs-rewrap-passphrase [✎] [×]
📄 ecryptfs-rewrite-file [✎] [×]
📄 ecryptfs-setup-private [✎] [×]
📄 ecryptfs-setup-swap [✎] [×]
📄 ecryptfs-stat [✎] [×]
📄 ecryptfs-umount-private [✎] [×]
📄 ecryptfs-unwrap-passphrase [✎] [×]
📄 ecryptfs-verify [✎] [×]
📄 ecryptfs-wrap-passphrase [✎] [×]
📄 ecryptfsd [✎] [×]
📄 ed [✎] [×]
📄 egrep [✎] [×]
📄 eject [✎] [×]
📄 elfedit [✎] [×]
📄 env [✎] [×]
📄 envsubst [✎] [×]
📄 eps2eps [✎] [×]
📄 eqn [✎] [×]
📄 erb [✎] [×]
📄 eu-addr2line [✎] [×]
📄 eu-ar [✎] [×]
📄 eu-elfcmp [✎] [×]
📄 eu-elfcompress [✎] [×]
📄 eu-elflint [✎] [×]
📄 eu-findtextrel [✎] [×]
📄 eu-make-debug-archive [✎] [×]
📄 eu-nm [✎] [×]
📄 eu-objdump [✎] [×]
📄 eu-ranlib [✎] [×]
📄 eu-readelf [✎] [×]
📄 eu-size [✎] [×]
📄 eu-stack [✎] [×]
📄 eu-strings [✎] [×]
📄 eu-strip [✎] [×]
📄 eu-unstrip [✎] [×]
📄 ex [✎] [×]
📄 expand [✎] [×]
📄 expect [✎] [×]
📄 expr [✎] [×]
📄 facter [✎] [×]
📄 factor [✎] [×]
📄 fail2ban-client [✎] [×]
📄 fail2ban-python [✎] [×]
📄 fail2ban-regex [✎] [×]
📄 fail2ban-server [✎] [×]
📄 fallocate [✎] [×]
📄 false [✎] [×]
📄 fc [✎] [×]
📄 fc-cache [✎] [×]
📄 fc-cache-64 [✎] [×]
📄 fc-cat [✎] [×]
📄 fc-conflist [✎] [×]
📄 fc-list [✎] [×]
📄 fc-match [✎] [×]
📄 fc-pattern [✎] [×]
📄 fc-query [✎] [×]
📄 fc-scan [✎] [×]
📄 fc-validate [✎] [×]
📄 ffcfstress [✎] [×]
📄 ffmvforce [✎] [×]
📄 ffset [✎] [×]
📄 fftest [✎] [×]
📄 fg [✎] [×]
📄 fgconsole [✎] [×]
📄 fgrep [✎] [×]
📄 file [✎] [×]
📄 find [✎] [×]
📄 find-repos-of-install [✎] [×]
📄 find2perl [✎] [×]
📄 findcon [✎] [×]
📄 findmnt [✎] [×]
📄 finger [✎] [×]
📄 fio [✎] [×]
📄 fio-btrace2fio [✎] [×]
📄 fio-dedupe [✎] [×]
📄 fio-genzipf [✎] [×]
📄 fio-verify-state [✎] [×]
📄 fio2gnuplot [✎] [×]
📄 fio_generate_plots [✎] [×]
📄 fio_jsonplus_clat2csv [✎] [×]
📄 fiologparser.py [✎] [×]
📄 fiologparser_hist.py [✎] [×]
📄 fipscheck [✎] [×]
📄 fipshmac [✎] [×]
📄 firewall-cmd [✎] [×]
📄 firewall-offline-cmd [✎] [×]
📄 flac [✎] [×]
📄 flex [✎] [×]
📄 flex++ [✎] [×]
📄 flock [✎] [×]
📄 fmt [✎] [×]
📄 fold [✎] [×]
📄 fonttosfnt [✎] [×]
📄 foomatic-combo-xml [✎] [×]
📄 foomatic-compiledb [✎] [×]
📄 foomatic-configure [✎] [×]
📄 foomatic-datafile [✎] [×]
📄 foomatic-perl-data [✎] [×]
📄 foomatic-ppd-options [✎] [×]
📄 foomatic-ppd-to-xml [✎] [×]
📄 foomatic-ppdfile [✎] [×]
📄 foomatic-printjob [✎] [×]
📄 foomatic-rip [✎] [×]
📄 foomatic-searchprinter [✎] [×]
📄 formail [✎] [×]
📄 fprintd-delete [✎] [×]
📄 fprintd-enroll [✎] [×]
📄 fprintd-list [✎] [×]
📄 fprintd-verify [✎] [×]
📄 free [✎] [×]
📄 freetype-config [✎] [×]
📄 freshclam [✎] [×]
📄 fribidi [✎] [×]
📄 ftp [✎] [×]
📄 ftp-rfc [✎] [×]
📄 ftpdctl [✎] [×]
📄 funzip [✎] [×]
📄 fusermount [✎] [×]
📄 g++ [✎] [×]
📄 g32pbm [✎] [×]
📄 g3cat [✎] [×]
📄 galera_new_cluster [✎] [×]
📄 galera_recovery [✎] [×]
📄 gapplication [✎] [×]
📄 garb-systemd [✎] [×]
📄 garbd [✎] [×]
📄 gawk [✎] [×]
📄 gcc [✎] [×]
📄 gcc-ar [✎] [×]
📄 gcc-nm [✎] [×]
📄 gcc-ranlib [✎] [×]
📄 gccmakedep [✎] [×]
📄 gconf-merge-tree [✎] [×]
📄 gconftool-2 [✎] [×]
📄 gcore [✎] [×]
📄 gcov [✎] [×]
📄 gdb [✎] [×]
📄 gdb-add-index [✎] [×]
📄 gdbus [✎] [×]
📄 gdk-pixbuf-query-loaders-64 [✎] [×]
📄 gdk-pixbuf-thumbnailer [✎] [×]
📄 gem [✎] [×]
📄 gencat [✎] [×]
📄 genfio [✎] [×]
📄 genisoimage [✎] [×]
📄 genl-ctrl-list [✎] [×]
📄 geoiplookup [✎] [×]
📄 geoiplookup6 [✎] [×]
📄 geoipupdate [✎] [×]
📄 geqn [✎] [×]
📄 get-versions [✎] [×]
📄 get_module [✎] [×]
📄 getconf [✎] [×]
📄 getent [✎] [×]
📄 getfacl [✎] [×]
📄 getfattr [✎] [×]
📄 gethostip [✎] [×]
📄 getkeycodes [✎] [×]
📄 getopt [✎] [×]
📄 getopts [✎] [×]
📄 gettext [✎] [×]
📄 gettext.sh [✎] [×]
📄 ghostscript [✎] [×]
📄 gio [✎] [×]
📄 gio-querymodules-64 [✎] [×]
📄 glib-compile-schemas [✎] [×]
📄 gmake [✎] [×]
📄 gneqn [✎] [×]
📄 gnroff [✎] [×]
📄 gpasswd [✎] [×]
📄 gpg [✎] [×]
📄 gpg-agent [✎] [×]
📄 gpg-connect-agent [✎] [×]
📄 gpg-error [✎] [×]
📄 gpg-error-config [✎] [×]
📄 gpg-zip [✎] [×]
📄 gpg2 [✎] [×]
📄 gpgconf [✎] [×]
📄 gpgparsemail [✎] [×]
📄 gpgsplit [✎] [×]
📄 gpgv [✎] [×]
📄 gpgv2 [✎] [×]
📄 gpic [✎] [×]
📄 gpm-root [✎] [×]
📄 gprof [✎] [×]
📄 gr2fonttest [✎] [×]
📄 grep [✎] [×]
📄 groff [✎] [×]
📄 grops [✎] [×]
📄 grotty [✎] [×]
📄 groups [✎] [×]
📄 grub2-editenv [✎] [×]
📄 grub2-file [✎] [×]
📄 grub2-fstest [✎] [×]
📄 grub2-glue-efi [✎] [×]
📄 grub2-kbdcomp [✎] [×]
📄 grub2-menulst2cfg [✎] [×]
📄 grub2-mkfont [✎] [×]
📄 grub2-mkimage [✎] [×]
📄 grub2-mklayout [✎] [×]
📄 grub2-mknetdir [✎] [×]
📄 grub2-mkpasswd-pbkdf2 [✎] [×]
📄 grub2-mkrelpath [✎] [×]
📄 grub2-mkrescue [✎] [×]
📄 grub2-mkstandalone [✎] [×]
📄 grub2-render-label [✎] [×]
📄 grub2-script-check [✎] [×]
📄 grub2-syslinux2cfg [✎] [×]
📄 gs [✎] [×]
📄 gsbj [✎] [×]
📄 gsdj [✎] [×]
📄 gsdj500 [✎] [×]
📄 gsettings [✎] [×]
📄 gsettings-data-convert [✎] [×]
📄 gslj [✎] [×]
📄 gslp [✎] [×]
📄 gsnd [✎] [×]
📄 gsoelim [✎] [×]
📄 gss-client [✎] [×]
📄 gst-feedback [✎] [×]
📄 gst-feedback-0.10 [✎] [×]
📄 gst-inspect [✎] [×]
📄 gst-inspect-0.10 [✎] [×]
📄 gst-inspect-1.0 [✎] [×]
📄 gst-launch [✎] [×]
📄 gst-launch-0.10 [✎] [×]
📄 gst-launch-1.0 [✎] [×]
📄 gst-stats-1.0 [✎] [×]
📄 gst-typefind [✎] [×]
📄 gst-typefind-0.10 [✎] [×]
📄 gst-typefind-1.0 [✎] [×]
📄 gst-xmlinspect [✎] [×]
📄 gst-xmlinspect-0.10 [✎] [×]
📄 gst-xmllaunch [✎] [×]
📄 gst-xmllaunch-0.10 [✎] [×]
📄 gstack [✎] [×]
📄 gtar [✎] [×]
📄 gtbl [✎] [×]
📄 gtk-launch [✎] [×]
📄 gtk-query-immodules-2.0-64 [✎] [×]
📄 gtk-query-immodules-3.0-64 [✎] [×]
📄 gtk-update-icon-cache [✎] [×]
📄 gtroff [✎] [×]
📄 gunzip [✎] [×]
📄 gzexe [✎] [×]
📄 gzip [✎] [×]
📄 h2ph [✎] [×]
📄 h2xs [✎] [×]
📄 hdsploader [✎] [×]
📄 head [✎] [×]
📄 hesinfo [✎] [×]
📄 hexdump [✎] [×]
📄 hltest [✎] [×]
📄 hmac256 [✎] [×]
📄 host [✎] [×]
📄 hostid [✎] [×]
📄 hostname [✎] [×]
📄 hostnamectl [✎] [×]
📄 hoststat [✎] [×]
📄 htop [✎] [×]
📄 hunspell [✎] [×]
📄 i386 [✎] [×]
📄 iceauth [✎] [×]
📄 iconv [✎] [×]
📄 id [✎] [×]
📄 idiag-socket-details [✎] [×]
📄 idn [✎] [×]
📄 ifnames [✎] [×]
📄 igawk [✎] [×]
📄 imake [✎] [×]
📄 info [✎] [×]
📄 infocmp [✎] [×]
📄 infokey [✎] [×]
📄 infotocap [✎] [×]
📄 innochecksum [✎] [×]
📄 inputattach [✎] [×]
📄 install [✎] [×]
📄 install-catalog [✎] [×]
📄 instmodsh [✎] [×]
📄 ionice [✎] [×]
📄 ioping [✎] [×]
📄 iostat [✎] [×]
📄 ipcalc [✎] [×]
📄 ipcmk [✎] [×]
📄 ipcount [✎] [×]
📄 ipcrm [✎] [×]
📄 ipcs [✎] [×]
📄 iptab [✎] [×]
📄 iptables-xml [✎] [×]
📄 irb [✎] [×]
📄 isodebug [✎] [×]
📄 isodump [✎] [×]
📄 isohybrid [✎] [×]
📄 isoinfo [✎] [×]
📄 isosize [✎] [×]
📄 isovfy [✎] [×]
📄 ispell [✎] [×]
📄 jobs [✎] [×]
📄 join [✎] [×]
📄 journalctl [✎] [×]
📄 jscal [✎] [×]
📄 jscal-restore [✎] [×]
📄 jscal-store [✎] [×]
📄 json_reformat [✎] [×]
📄 json_verify [✎] [×]
📄 jstest [✎] [×]
📄 jwhois [✎] [×]
📄 k5srvutil [✎] [×]
📄 kadmin [✎] [×]
📄 kbd_mode [✎] [×]
📄 kbdinfo [✎] [×]
📄 kbdrate [✎] [×]
📄 kdestroy [✎] [×]
📄 kdumpctl [✎] [×]
📄 kernel-install [✎] [×]
📄 keyctl [✎] [×]
📄 kibitz [✎] [×]
📄 kill [✎] [×]
📄 killall [✎] [×]
📄 kinit [✎] [×]
📄 klist [✎] [×]
📄 kmod [✎] [×]
📄 kpasswd [✎] [×]
📄 krb5-config [✎] [×]
📄 ksh [✎] [×]
📄 ksh93 [✎] [×]
📄 ksu [✎] [×]
📄 kswitch [✎] [×]
📄 ktutil [✎] [×]
📄 kvno [✎] [×]
📄 last [✎] [×]
📄 lastb [✎] [×]
📄 lastcomm [✎] [×]
📄 lastlog [✎] [×]
📄 lchfn [✎] [×]
📄 lchsh [✎] [×]
📄 ld [✎] [×]
📄 ld.bfd [✎] [×]
📄 ld.gold [✎] [×]
📄 ldd [✎] [×]
📄 less [✎] [×]
📄 lessecho [✎] [×]
📄 lesskey [✎] [×]
📄 lesspipe.sh [✎] [×]
📄 lex [✎] [×]
📄 lexgrog [✎] [×]
📄 lftp [✎] [×]
📄 lftpget [✎] [×]
📄 libgcrypt-config [✎] [×]
📄 libmcrypt-config [✎] [×]
📄 libnetcfg [✎] [×]
📄 libpng-config [✎] [×]
📄 libpng15-config [✎] [×]
📄 libtar [✎] [×]
📄 libtool [✎] [×]
📄 libtoolize [✎] [×]
📄 link [✎] [×]
📄 linux-boot-prober [✎] [×]
📄 linux32 [✎] [×]
📄 linux64 [✎] [×]
📄 ln [✎] [×]
📄 lndir [✎] [×]
📄 loadkeys [✎] [×]
📄 loadunimap [✎] [×]
📄 locale [✎] [×]
📄 localectl [✎] [×]
📄 localedef [✎] [×]
📄 locate [✎] [×]
📄 lockfile [✎] [×]
📄 logger [✎] [×]
📄 login [✎] [×]
📄 loginctl [✎] [×]
📄 logname [✎] [×]
📄 look [✎] [×]
📄 lp [✎] [×]
📄 lp.cups [✎] [×]
📄 lpoptions [✎] [×]
📄 lppasswd [✎] [×]
📄 lpq [✎] [×]
📄 lpq.cups [✎] [×]
📄 lpr [✎] [×]
📄 lpr.cups [✎] [×]
📄 lprm [✎] [×]
📄 lprm.cups [✎] [×]
📄 lprsetup.sh [✎] [×]
📄 lpstat [✎] [×]
📄 lpstat.cups [✎] [×]
📄 lpunlock [✎] [×]
📄 ls [✎] [×]
📄 lsattr [✎] [×]
📄 lsb_release [✎] [×]
📄 lsblk [✎] [×]
📄 lscpu [✎] [×]
📄 lsinitrd [✎] [×]
📄 lsipc [✎] [×]
📄 lslocks [✎] [×]
📄 lslogins [✎] [×]
📄 lsmcli [✎] [×]
📄 lsmd [✎] [×]
📄 lsmem [✎] [×]
📄 lsns [✎] [×]
📄 lsscsi [✎] [×]
📄 lsusb [✎] [×]
📄 lsusb.py [✎] [×]
📄 lua [✎] [×]
📄 luac [✎] [×]
📄 lwp-download [✎] [×]
📄 lwp-dump [✎] [×]
📄 lwp-mirror [✎] [×]
📄 lwp-request [✎] [×]
📄 lynis [✎] [×]
📄 lz [✎] [×]
📄 lz4 [✎] [×]
📄 lz4c [✎] [×]
📄 lz4cat [✎] [×]
📄 m4 [✎] [×]
📄 mac2unix [✎] [×]
📄 machinectl [✎] [×]
📄 mail [✎] [×]
📄 mailq [✎] [×]
📄 mailq.postfix [✎] [×]
📄 mailq.sendmail [✎] [×]
📄 mailstat [✎] [×]
📄 mailx [✎] [×]
📄 make [✎] [×]
📄 makedb [✎] [×]
📄 makedepend [✎] [×]
📄 makeg [✎] [×]
📄 makemap [✎] [×]
📄 man [✎] [×]
📄 mandb [✎] [×]
📄 manpath [✎] [×]
📄 mapscrn [✎] [×]
📄 mariadb-service-convert [✎] [×]
📄 mariadb_config [✎] [×]
📄 mattrib [✎] [×]
📄 mbadblocks [✎] [×]
📄 mbim-network [✎] [×]
📄 mbimcli [✎] [×]
📄 mc [✎] [×]
📄 mcat [✎] [×]
📄 mcd [✎] [×]
📄 mcdiff [✎] [×]
📄 mcedit [✎] [×]
📄 mcheck [✎] [×]
📄 mclasserase [✎] [×]
📄 mcomp [✎] [×]
📄 mcookie [✎] [×]
📄 mcopy [✎] [×]
📄 mcrypt [✎] [×]
📄 mcview [✎] [×]
📄 md5sum [✎] [×]
📄 mdecrypt [✎] [×]
📄 mdel [✎] [×]
📄 mdeltree [✎] [×]
📄 mdig [✎] [×]
📄 mdir [✎] [×]
📄 mdu [✎] [×]
📄 memaslap [✎] [×]
📄 memcapable [✎] [×]
📄 memcat [✎] [×]
📄 memcp [✎] [×]
📄 memdiskfind [✎] [×]
📄 memdump [✎] [×]
📄 memerror [✎] [×]
📄 memexist [✎] [×]
📄 memflush [✎] [×]
📄 memparse [✎] [×]
📄 memping [✎] [×]
📄 memrm [✎] [×]
📄 memslap [✎] [×]
📄 memstat [✎] [×]
📄 memtouch [✎] [×]
📄 mergelib [✎] [×]
📄 mesg [✎] [×]
📄 metaflac [✎] [×]
📄 mev [✎] [×]
📄 mformat [✎] [×]
📄 minfo [✎] [×]
📄 mixartloader [✎] [×]
📄 mkdir [✎] [×]
📄 mkdirhier [✎] [×]
📄 mkfifo [✎] [×]
📄 mkfontdir [✎] [×]
📄 mkfontscale [✎] [×]
📄 mkhtmlindex [✎] [×]
📄 mkhybrid [✎] [×]
📄 mkinitrd [✎] [×]
📄 mkisofs [✎] [×]
📄 mkmanifest [✎] [×]
📄 mknod [✎] [×]
📄 mkpasswd [✎] [×]
📄 mkrfc2734 [✎] [×]
📄 mktemp [✎] [×]
📄 mkudffs [✎] [×]
📄 mlabel [✎] [×]
📄 mmcli [✎] [×]
📄 mmd [✎] [×]
📄 mmount [✎] [×]
📄 mmove [✎] [×]
📄 modutil [✎] [×]
📄 more [✎] [×]
📄 mount [✎] [×]
📄 mountpoint [✎] [×]
📄 mouse-test [✎] [×]
📄 mpartition [✎] [×]
📄 mpstat [✎] [×]
📄 mrd [✎] [×]
📄 mren [✎] [×]
📄 msgattrib [✎] [×]
📄 msgcat [✎] [×]
📄 msgcmp [✎] [×]
📄 msgcomm [✎] [×]
📄 msgconv [✎] [×]
📄 msgen [✎] [×]
📄 msgexec [✎] [×]
📄 msgfilter [✎] [×]
📄 msgfmt [✎] [×]
📄 msggrep [✎] [×]
📄 msghack [✎] [×]
📄 msginit [✎] [×]
📄 msgmerge [✎] [×]
📄 msgunfmt [✎] [×]
📄 msguniq [✎] [×]
📄 mshortname [✎] [×]
📄 mshowfat [✎] [×]
📄 msql2mysql [✎] [×]
📄 mtools [✎] [×]
📄 mtoolstest [✎] [×]
📄 mtype [✎] [×]
📄 mv [✎] [×]
📄 mxtar [✎] [×]
📄 my_print_defaults [✎] [×]
📄 myisam_ftdump [✎] [×]
📄 myisamchk [✎] [×]
📄 myisamlog [✎] [×]
📄 myisampack [✎] [×]
📄 mysql [✎] [×]
📄 mysql_config [✎] [×]
📄 mysql_convert_table_format [✎] [×]
📄 mysql_embedded [✎] [×]
📄 mysql_find_rows [✎] [×]
📄 mysql_fix_extensions [✎] [×]
📄 mysql_install_db [✎] [×]
📄 mysql_plugin [✎] [×]
📄 mysql_secure_installation [✎] [×]
📄 mysql_setpermission [✎] [×]
📄 mysql_tzinfo_to_sql [✎] [×]
📄 mysql_upgrade [✎] [×]
📄 mysql_waitpid [✎] [×]
📄 mysqlaccess [✎] [×]
📄 mysqladmin [✎] [×]
📄 mysqlbinlog [✎] [×]
📄 mysqlcheck [✎] [×]
📄 mysqld_multi [✎] [×]
📄 mysqld_safe [✎] [×]
📄 mysqld_safe_helper [✎] [×]
📄 mysqldump [✎] [×]
📄 mysqldumpslow [✎] [×]
📄 mysqlhotcopy [✎] [×]
📄 mysqlimport [✎] [×]
📄 mysqlshow [✎] [×]
📄 mysqlslap [✎] [×]
📄 mzip [✎] [×]
📄 nail [✎] [×]
📄 namei [✎] [×]
📄 nano [✎] [×]
📄 nc [✎] [×]
📄 ncat [✎] [×]
📄 ncdu [✎] [×]
📄 ndptool [✎] [×]
📄 needs-restarting [✎] [×]
📄 neqn [✎] [×]
📄 netstat [✎] [×]
📄 nettle-hash [✎] [×]
📄 nettle-lfib-stream [✎] [×]
📄 newaliases [✎] [×]
📄 newaliases.postfix [✎] [×]
📄 newaliases.sendmail [✎] [×]
📄 newgidmap [✎] [×]
📄 newgrp [✎] [×]
📄 newuidmap [✎] [×]
📄 nf-ct-add [✎] [×]
📄 nf-ct-list [✎] [×]
📄 nf-exp-add [✎] [×]
📄 nf-exp-delete [✎] [×]
📄 nf-exp-list [✎] [×]
📄 nf-log [✎] [×]
📄 nf-monitor [✎] [×]
📄 nf-queue [✎] [×]
📄 nfsiostat-sysstat [✎] [×]
📄 ngettext [✎] [×]
📄 nice [✎] [×]
📄 nisdomainname [✎] [×]
📄 nl [✎] [×]
📄 nl-addr-add [✎] [×]
📄 nl-addr-delete [✎] [×]
📄 nl-addr-list [✎] [×]
📄 nl-class-add [✎] [×]
📄 nl-class-delete [✎] [×]
📄 nl-class-list [✎] [×]
📄 nl-classid-lookup [✎] [×]
📄 nl-cls-add [✎] [×]
📄 nl-cls-delete [✎] [×]
📄 nl-cls-list [✎] [×]
📄 nl-fib-lookup [✎] [×]
📄 nl-link-enslave [✎] [×]
📄 nl-link-ifindex2name [✎] [×]
📄 nl-link-list [✎] [×]
📄 nl-link-name2ifindex [✎] [×]
📄 nl-link-release [✎] [×]
📄 nl-link-set [✎] [×]
📄 nl-link-stats [✎] [×]
📄 nl-list-caches [✎] [×]
📄 nl-list-sockets [✎] [×]
📄 nl-monitor [✎] [×]
📄 nl-neigh-add [✎] [×]
📄 nl-neigh-delete [✎] [×]
📄 nl-neigh-list [✎] [×]
📄 nl-neightbl-list [✎] [×]
📄 nl-pktloc-lookup [✎] [×]
📄 nl-qdisc-add [✎] [×]
📄 nl-qdisc-delete [✎] [×]
📄 nl-qdisc-list [✎] [×]
📄 nl-route-add [✎] [×]
📄 nl-route-delete [✎] [×]
📄 nl-route-get [✎] [×]
📄 nl-route-list [✎] [×]
📄 nl-rule-list [✎] [×]
📄 nl-tctree-list [✎] [×]
📄 nl-util-addr [✎] [×]
📄 nm [✎] [×]
📄 nohup [✎] [×]
📄 notify-send [✎] [×]
📄 nproc [✎] [×]
📄 nroff [✎] [×]
📄 nsenter [✎] [×]
📄 nslookup [✎] [×]
📄 nss-policy-check [✎] [×]
📄 nsupdate [✎] [×]
📄 ntpstat [✎] [×]
📄 numfmt [✎] [×]
📄 objcopy [✎] [×]
📄 objdump [✎] [×]
📄 od [✎] [×]
📄 oddjob_request [✎] [×]
📄 oldfind [✎] [×]
📄 oldrdist [✎] [×]
📄 on_ac_power [✎] [×]
📄 onig-config [✎] [×]
📄 opax [✎] [×]
📄 open [✎] [×]
📄 openssl [✎] [×]
📄 openvt [✎] [×]
📄 orc-bugreport [✎] [×]
📄 os-prober [✎] [×]
📄 p11-kit [✎] [×]
📄 package-cleanup [✎] [×]
📄 page_owner_sort [✎] [×]
📄 panelctl [✎] [×]
📄 pango-list [✎] [×]
📄 pango-querymodules-64 [✎] [×]
📄 pango-view [✎] [×]
📄 paperconf [✎] [×]
📄 paps [✎] [×]
📄 passmass [✎] [×]
📄 passwd [✎] [×]
📄 paste [✎] [×]
📄 patch [✎] [×]
📄 pathchk [✎] [×]
📄 pax [✎] [×]
📄 pchrt [✎] [×]
📄 pcre-config [✎] [×]
📄 pdf2dsc [✎] [×]
📄 pdf2ps [✎] [×]
📄 pdfdetach [✎] [×]
📄 pdffonts [✎] [×]
📄 pdfimages [✎] [×]
📄 pdfinfo [✎] [×]
📄 pdfseparate [✎] [×]
📄 pdftocairo [✎] [×]
📄 pdftohtml [✎] [×]
📄 pdftoppm [✎] [×]
📄 pdftops [✎] [×]
📄 pdftotext [✎] [×]
📄 pdfunite [✎] [×]
📄 peekfd [✎] [×]
📄 perl [✎] [×]
📄 perl5.16.3 [✎] [×]
📄 perlbug [✎] [×]
📄 perldoc [✎] [×]
📄 perlivp [✎] [×]
📄 perlthanks [✎] [×]
📄 perror [✎] [×]
📄 pf2afm [✎] [×]
📄 pfbtopfa [✎] [×]
📄 pflags [✎] [×]
📄 pftp [✎] [×]
📄 pgawk [✎] [×]
📄 pgrep [✎] [×]
📄 pic [✎] [×]
📄 pico [✎] [×]
📄 piconv [✎] [×]
📄 pidstat [✎] [×]
📄 pinentry [✎] [×]
📄 pinentry-curses [✎] [×]
📄 pinfo [✎] [×]
📄 ping [✎] [×]
📄 ping6 [✎] [×]
📄 pinky [✎] [×]
📄 pitchplay [✎] [×]
📄 pk11install [✎] [×]
📄 pk12util [✎] [×]
📄 pkaction [✎] [×]
📄 pkcheck [✎] [×]
📄 pkcs1-conv [✎] [×]
📄 pkcs11_eventmgr [✎] [×]
📄 pkcs11_inspect [✎] [×]
📄 pkcs11_listcerts [✎] [×]
📄 pkcs11_setup [✎] [×]
📄 pkexec [✎] [×]
📄 pkg-config [✎] [×]
📄 pkill [✎] [×]
📄 pkla-admin-identities [✎] [×]
📄 pkla-check-authorization [✎] [×]
📄 pklogin_finder [✎] [×]
📄 pktsetup [✎] [×]
📄 pkttyagent [✎] [×]
📄 pl2pm [✎] [×]
📄 pldd [✎] [×]
📄 plymouth [✎] [×]
📄 pm-is-supported [✎] [×]
📄 pmap [✎] [×]
📄 pod2html [✎] [×]
📄 pod2latex [✎] [×]
📄 pod2man [✎] [×]
📄 pod2text [✎] [×]
📄 pod2usage [✎] [×]
📄 podchecker [✎] [×]
📄 podselect [✎] [×]
📄 post-grohtml [✎] [×]
📄 powernow-k8-decode [✎] [×]
📄 ppdc [✎] [×]
📄 ppdhtml [✎] [×]
📄 ppdi [✎] [×]
📄 ppdmerge [✎] [×]
📄 ppdpo [✎] [×]
📄 pphs [✎] [×]
📄 pr [✎] [×]
📄 pre-grohtml [✎] [×]
📄 precat [✎] [×]
📄 preconv [✎] [×]
📄 preunzip [✎] [×]
📄 prezip [✎] [×]
📄 prezip-bin [✎] [×]
📄 printafm [✎] [×]
📄 printenv [✎] [×]
📄 printf [✎] [×]
📄 prlimit [✎] [×]
📄 procmail [✎] [×]
📄 prove [✎] [×]
📄 prtstat [✎] [×]
📄 ps [✎] [×]
📄 ps2ascii [✎] [×]
📄 ps2epsi [✎] [×]
📄 ps2pdf [✎] [×]
📄 ps2pdf12 [✎] [×]
📄 ps2pdf13 [✎] [×]
📄 ps2pdf14 [✎] [×]
📄 ps2pdfwr [✎] [×]
📄 ps2ps [✎] [×]
📄 ps2ps2 [✎] [×]
📄 psed [✎] [×]
📄 psfaddtable [✎] [×]
📄 psfgettable [✎] [×]
📄 psfstriptable [✎] [×]
📄 psfxtable [✎] [×]
📄 pstack [✎] [×]
📄 pstree [✎] [×]
📄 pstree.x11 [✎] [×]
📄 pstruct [✎] [×]
📄 ptaskset [✎] [×]
📄 ptx [✎] [×]
📄 purgestat [✎] [×]
📄 pwcrypt [✎] [×]
📄 pwd [✎] [×]
📄 pwdx [✎] [×]
📄 pwmake [✎] [×]
📄 pwscore [✎] [×]
📄 pydoc [✎] [×]
📄 python [✎] [×]
📄 python2 [✎] [×]
📄 python2.7 [✎] [×]
📄 qdbus [✎] [×]
📄 qmi-network [✎] [×]
📄 qmicli [✎] [×]
📄 quota [✎] [×]
📄 quotasync [✎] [×]
📄 ranlib [✎] [×]
📄 raw [✎] [×]
📄 rcp [✎] [×]
📄 rdate [✎] [×]
📄 rdist [✎] [×]
📄 rdistd [✎] [×]
📄 rdoc [✎] [×]
📄 read [✎] [×]
📄 readelf [✎] [×]
📄 readlink [✎] [×]
📄 readmult [✎] [×]
📄 realpath [✎] [×]
📄 recode-sr-latin [✎] [×]
📄 red [✎] [×]
📄 redhat_lsb_init [✎] [×]
📄 rename [✎] [×]
📄 renice [✎] [×]
📄 replace [✎] [×]
📄 repo-graph [✎] [×]
📄 repo-rss [✎] [×]
📄 repoclosure [✎] [×]
📄 repodiff [✎] [×]
📄 repomanage [✎] [×]
📄 repoquery [✎] [×]
📄 report-cli [✎] [×]
📄 reporter-mailx [✎] [×]
📄 reporter-mantisbt [✎] [×]
📄 reporter-rhtsupport [✎] [×]
📄 reporter-ureport [✎] [×]
📄 reposync [✎] [×]
📄 repotrack [✎] [×]
📄 reset [✎] [×]
📄 resizecons [✎] [×]
📄 resolve_stack_dump [✎] [×]
📄 resolveip [✎] [×]
📄 rev [✎] [×]
📄 revpath [✎] [×]
📄 rexec [✎] [×]
📄 rftp [✎] [×]
📄 ri [✎] [×]
📄 rksh [✎] [×]
📄 rlogin [✎] [×]
📄 rlogin-cwd [✎] [×]
📄 rm [✎] [×]
📄 rmail [✎] [×]
📄 rmail.postfix [✎] [×]
📄 rmail.sendmail [✎] [×]
📄 rmdir [✎] [×]
📄 rnano [✎] [×]
📄 rngtest [✎] [×]
📄 rpcgen [✎] [×]
📄 rpm [✎] [×]
📄 rpm2cpio [✎] [×]
📄 rpmdb [✎] [×]
📄 rpmkeys [✎] [×]
📄 rpmquery [✎] [×]
📄 rpmverify [✎] [×]
📄 rsh [✎] [×]
📄 rsync [✎] [×]
📄 rsyslog-recover-qi.pl [✎] [×]
📄 ruby [✎] [×]
📄 run-parts [✎] [×]
📄 run-with-aspell [✎] [×]
📄 runcon [✎] [×]
📄 rvi [✎] [×]
📄 rview [✎] [×]
📄 rvim [✎] [×]
📄 rxe_cfg [✎] [×]
📄 s2p [✎] [×]
📄 sadf [✎] [×]
📄 sandbox [✎] [×]
📄 sar [✎] [×]
📄 sasl2-sample-client [✎] [×]
📄 sasl2-sample-server [✎] [×]
📄 satyr [✎] [×]
📄 scl [✎] [×]
📄 scl_enabled [✎] [×]
📄 scl_source [✎] [×]
📄 scp [✎] [×]
📄 screen [✎] [×]
📄 script [✎] [×]
📄 scriptreplay [✎] [×]
📄 sdiff [✎] [×]
📄 seaudit [✎] [×]
📄 sechecker [✎] [×]
📄 secon [✎] [×]
📄 sed [✎] [×]
📄 sediff [✎] [×]
📄 sedismod [✎] [×]
📄 sedispol [✎] [×]
📄 seinfo [✎] [×]
📄 semodule_package [✎] [×]
📄 sendiso [✎] [×]
📄 seq [✎] [×]
📄 sesearch [✎] [×]
📄 sessreg [✎] [×]
📄 setarch [✎] [×]
📄 setfacl [✎] [×]
📄 setfattr [✎] [×]
📄 setfont [✎] [×]
📄 setkeycodes [✎] [×]
📄 setleds [✎] [×]
📄 setmetamode [✎] [×]
📄 setpriv [✎] [×]
📄 setserial [✎] [×]
📄 setsid [✎] [×]
📄 setterm [✎] [×]
📄 setup [✎] [×]
📄 setup-nsssysinit [✎] [×]
📄 setup-nsssysinit.sh [✎] [×]
📄 setvtrgb [✎] [×]
📄 sexp-conv [✎] [×]
📄 sftp [✎] [×]
📄 sg [✎] [×]
📄 sgmlwhich [✎] [×]
📄 sh [✎] [×]
📄 sha1sum [✎] [×]
📄 sha224sum [✎] [×]
📄 sha256sum [✎] [×]
📄 sha384sum [✎] [×]
📄 sha512sum [✎] [×]
📄 shasum [✎] [×]
📄 shcomp [✎] [×]
📄 show-changed-rco [✎] [×]
📄 show-installed [✎] [×]
📄 showconsolefont [✎] [×]
📄 showkey [✎] [×]
📄 showrgb [✎] [×]
📄 shred [✎] [×]
📄 shuf [✎] [×]
📄 signver [✎] [×]
📄 sigtool [✎] [×]
📄 sim_client [✎] [×]
📄 sim_lsmplugin [✎] [×]
📄 simc_lsmplugin [✎] [×]
📄 size [✎] [×]
📄 skill [✎] [×]
📄 slabinfo [✎] [×]
📄 slabtop [✎] [×]
📄 sleep [✎] [×]
📄 slogin [✎] [×]
📄 snice [✎] [×]
📄 soelim [✎] [×]
📄 sort [✎] [×]
📄 sotruss [✎] [×]
📄 spax [✎] [×]
📄 spell [✎] [×]
📄 splain [✎] [×]
📄 split [✎] [×]
📄 sprof [✎] [×]
📄 sqlite3 [✎] [×]
📄 squashfuse [✎] [×]
📄 squashfuse_ll [✎] [×]
📄 ssh [✎] [×]
📄 ssh-add [✎] [×]
📄 ssh-agent [✎] [×]
📄 ssh-copy-id [✎] [×]
📄 ssh-keygen [✎] [×]
📄 ssh-keyscan [✎] [×]
📄 ssltap [✎] [×]
📄 stap-merge [✎] [×]
📄 stap-report [✎] [×]
📄 stapbpf [✎] [×]
📄 stapdyn [✎] [×]
📄 staprun [✎] [×]
📄 stapsh [✎] [×]
📄 stat [✎] [×]
📄 stdbuf [✎] [×]
📄 strace [✎] [×]
📄 strace-log-merge [✎] [×]
📄 strings [✎] [×]
📄 strip [✎] [×]
📄 stty [✎] [×]
📄 stunnel [✎] [×]
📄 su [✎] [×]
📄 sudo [✎] [×]
📄 sudoedit [✎] [×]
📄 sudoreplay [✎] [×]
📄 sum [✎] [×]
📄 symlinks [✎] [×]
📄 sync [✎] [×]
📄 syslinux [✎] [×]
📄 systemctl [✎] [×]
📄 systemd-analyze [✎] [×]
📄 systemd-ask-password [✎] [×]
📄 systemd-cat [✎] [×]
📄 systemd-cgls [✎] [×]
📄 systemd-cgtop [✎] [×]
📄 systemd-coredumpctl [✎] [×]
📄 systemd-delta [✎] [×]
📄 systemd-detect-virt [✎] [×]
📄 systemd-escape [✎] [×]
📄 systemd-firstboot [✎] [×]
📄 systemd-hwdb [✎] [×]
📄 systemd-inhibit [✎] [×]
📄 systemd-loginctl [✎] [×]
📄 systemd-machine-id-setup [✎] [×]
📄 systemd-notify [✎] [×]
📄 systemd-nspawn [✎] [×]
📄 systemd-path [✎] [×]
📄 systemd-run [✎] [×]
📄 systemd-stdio-bridge [✎] [×]
📄 systemd-sysv-convert [✎] [×]
📄 systemd-tmpfiles [✎] [×]
📄 systemd-tty-ask-password-agent [✎] [×]
📄 systool [✎] [×]
📄 tabs [✎] [×]
📄 tac [✎] [×]
📄 tail [✎] [×]
📄 tailf [✎] [×]
📄 talk [✎] [×]
📄 tapestat [✎] [×]
📄 tar [✎] [×]
📄 taskset [✎] [×]
📄 tbl [✎] [×]
📄 tclsh [✎] [×]
📄 tclsh8.5 [✎] [×]
📄 tcptraceroute [✎] [×]
📄 tcsh [✎] [×]
📄 teamd [✎] [×]
📄 teamdctl [✎] [×]
📄 teamnl [✎] [×]
📄 tee [✎] [×]
📄 telnet [✎] [×]
📄 test [✎] [×]
📄 testgdbm [✎] [×]
📄 testlibraw [✎] [×]
📄 testrb [✎] [×]
📄 tgz [✎] [×]
📄 tic [✎] [×]
📄 time [✎] [×]
📄 timed-read [✎] [×]
📄 timed-run [✎] [×]
📄 timedatectl [✎] [×]
📄 timeout [✎] [×]
📄 tload [✎] [×]
📄 tmon [✎] [×]
📄 toe [✎] [×]
📄 top [✎] [×]
📄 touch [✎] [×]
📄 tput [✎] [×]
📄 tr [✎] [×]
📄 tracepath [✎] [×]
📄 tracepath6 [✎] [×]
📄 traceroute [✎] [×]
📄 traceroute6 [✎] [×]
📄 tree [✎] [×]
📄 troff [✎] [×]
📄 true [✎] [×]
📄 truncate [✎] [×]
📄 trust [✎] [×]
📄 tset [✎] [×]
📄 tsort [✎] [×]
📄 tty [✎] [×]
📄 turbostat [✎] [×]
📄 tzselect [✎] [×]
📄 ucs2any [✎] [×]
📄 udevadm [✎] [×]
📄 ul [✎] [×]
📄 ulockmgr_server [✎] [×]
📄 umask [✎] [×]
📄 umount [✎] [×]
📄 unalias [✎] [×]
📄 uname [✎] [×]
📄 unbuffer [✎] [×]
📄 unexpand [✎] [×]
📄 unicode_start [✎] [×]
📄 unicode_stop [✎] [×]
📄 uniq [✎] [×]
📄 unix-lpr.sh [✎] [×]
📄 unix2dos [✎] [×]
📄 unix2mac [✎] [×]
📄 unlink [✎] [×]
📄 unlz4 [✎] [×]
📄 unshare [✎] [×]
📄 unxz [✎] [×]
📄 unzip [✎] [×]
📄 unzipsfx [✎] [×]
📄 update-ca-trust [✎] [×]
📄 update-desktop-database [✎] [×]
📄 update-gtk-immodules [✎] [×]
📄 update-mime-database [✎] [×]
📄 updatedb [✎] [×]
📄 uptime [✎] [×]
📄 uptrack-uname [✎] [×]
📄 urlgrabber [✎] [×]
📄 usb-devices [✎] [×]
📄 usbhid-dump [✎] [×]
📄 users [✎] [×]
📄 usleep [✎] [×]
📄 usx2yloader [✎] [×]
📄 utmpdump [✎] [×]
📄 uuclient [✎] [×]
📄 uuidgen [✎] [×]
📄 uz [✎] [×]
📄 vdir [✎] [×]
📄 vdo [✎] [×]
📄 vdo-by-dev [✎] [×]
📄 vdodmeventd [✎] [×]
📄 vdodumpconfig [✎] [×]
📄 vdoforcerebuild [✎] [×]
📄 vdoformat [✎] [×]
📄 vdoprepareupgrade [✎] [×]
📄 vdoreadonly [✎] [×]
📄 vdostats [✎] [×]
📄 verify_blkparse [✎] [×]
📄 verifytree [✎] [×]
📄 vi [✎] [×]
📄 view [✎] [×]
📄 vim [✎] [×]
📄 vimdiff [✎] [×]
📄 vimtutor [✎] [×]
📄 vlock [✎] [×]
📄 vmstat [✎] [×]
📄 vxloader [✎] [×]
📄 w [✎] [×]
📄 wait [✎] [×]
📄 wall [✎] [×]
📄 watch [✎] [×]
📄 watchgnupg [✎] [×]
📄 wavpack [✎] [×]
📄 wc [✎] [×]
📄 wdctl [✎] [×]
📄 weather [✎] [×]
📄 wget [✎] [×]
📄 whatis [✎] [×]
📄 whereis [✎] [×]
📄 which [✎] [×]
📄 whiptail [✎] [×]
📄 who [✎] [×]
📄 whoami [✎] [×]
📄 whois [✎] [×]
📄 wish [✎] [×]
📄 wish8.5 [✎] [×]
📄 word-list-compress [✎] [×]
📄 write [✎] [×]
📄 wrudf [✎] [×]
📄 wsrep_sst_common [✎] [×]
📄 wsrep_sst_mariabackup [✎] [×]
📄 wsrep_sst_mysqldump [✎] [×]
📄 wsrep_sst_rsync [✎] [×]
📄 wsrep_sst_rsync_wan [✎] [×]
📄 wsrep_sst_xtrabackup [✎] [×]
📄 wsrep_sst_xtrabackup-v2 [✎] [×]
📄 wvgain [✎] [×]
📄 wvunpack [✎] [×]
📄 x86_64 [✎] [×]
📄 x86_64-redhat-linux-c++ [✎] [×]
📄 x86_64-redhat-linux-g++ [✎] [×]
📄 x86_64-redhat-linux-gcc [✎] [×]
📄 x86_energy_perf_policy [✎] [×]
📄 xargs [✎] [×]
📄 xdg-desktop-icon [✎] [×]
📄 xdg-desktop-menu [✎] [×]
📄 xdg-email [✎] [×]
📄 xdg-icon-resource [✎] [×]
📄 xdg-mime [✎] [×]
📄 xdg-open [✎] [×]
📄 xdg-screensaver [✎] [×]
📄 xdg-settings [✎] [×]
📄 xgamma [✎] [×]
📄 xgettext [✎] [×]
📄 xhost [✎] [×]
📄 xinput [✎] [×]
📄 xkibitz [✎] [×]
📄 xkill [✎] [×]
📄 xmkmf [✎] [×]
📄 xml2-config [✎] [×]
📄 xmlcatalog [✎] [×]
📄 xmllint [✎] [×]
📄 xmlwf [✎] [×]
📄 xmodmap [✎] [×]
📄 xorg-x11-fonts-update-dirs [✎] [×]
📄 xrandr [✎] [×]
📄 xrdb [✎] [×]
📄 xrefresh [✎] [×]
📄 xset [✎] [×]
📄 xsetmode [✎] [×]
📄 xsetpointer [✎] [×]
📄 xsetroot [✎] [×]
📄 xslt-config [✎] [×]
📄 xsltproc [✎] [×]
📄 xstdcmap [✎] [×]
📄 xsubpp [✎] [×]
📄 xxd [✎] [×]
📄 xz [✎] [×]
📄 xzcat [✎] [×]
📄 xzcmp [✎] [×]
📄 xzdec [✎] [×]
📄 xzdiff [✎] [×]
📄 xzegrep [✎] [×]
📄 xzfgrep [✎] [×]
📄 xzgrep [✎] [×]
📄 xzless [✎] [×]
📄 xzmore [✎] [×]
📄 yacc [✎] [×]
📄 yes [✎] [×]
📄 ypcat [✎] [×]
📄 ypchfn [✎] [×]
📄 ypchsh [✎] [×]
📄 ypdomainname [✎] [×]
📄 ypmatch [✎] [×]
📄 yppasswd [✎] [×]
📄 ypwhich [✎] [×]
📄 yum [✎] [×]
📄 yum-builddep [✎] [×]
📄 yum-config-manager [✎] [×]
📄 yum-debug-dump [✎] [×]
📄 yum-debug-restore [✎] [×]
📄 yum-groups-manager [✎] [×]
📄 yumdownloader [✎] [×]
📄 zcat [✎] [×]
📄 zcmp [✎] [×]
📄 zdiff [✎] [×]
📄 zegrep [✎] [×]
📄 zfgrep [✎] [×]
📄 zforce [✎] [×]
📄 zgrep [✎] [×]
📄 zip [✎] [×]
📄 zipcloak [✎] [×]
📄 zipdetails [✎] [×]
📄 zipgrep [✎] [×]
📄 zipinfo [✎] [×]
📄 zipnote [✎] [×]
📄 zipsplit [✎] [×]
📄 zless [✎] [×]
📄 zmore [✎] [×]
📄 znew [✎] [×]
📄 zsoelim [✎] [×]